The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Hydrothermal Treatment of Protein, Polysaccharide, and Lipids Alone and in Mixtures
Open accessAbstract
Abstract We subjected a set of model compounds (cornstarch and cellulose as model polysaccharides, soy protein and albumin as model proteins, sunflower oil and castor oil as model lipids) to the processing conditions and product recovery protocol commonly used for hydrothermal liquefaction (HTL) of algal biomass to make crude bio-oil. The model compounds were treated individually and in mixtures at 300 and 350 °C for batch holding time ranging from 10 min to 90 min. The model lipids produced the highest yield (>90 wt %) of biocrude (operationally defined as material soluble in dichloromethane), followed by the model proteins (∼30–35 wt %) and then the model polysaccharides (∼10–15 wt %). The production of biocrude at 350 °C occurred fully within the first 10 min of treatment, and the biocrude yield changed very little at longer times. Liquefaction at 350 °C and 60 min nearly doubled the biocrude yields from polysaccharides, relative to those obtained at 300 °C and 20 min. Otherwise, the yields from the different model compounds at the milder and the more-severe conditions were comparable. In most instances, the biocrude yield from hydrothermal treatment of mixtures was very similar to the mass-averaged yield calculated from the individual compound results. The chief exceptions were binary combinations of polysaccharide and protein under the more-severe conditions. For these mixtures, the biocrude yield exceeded the mass-average yield calculated from the pure compound results, thereby providing evidence that interactions influencing the biocrude yield can occur during hydrothermal treatment of mixtures of the biomolecules. Even so, a quantitative model built on the assumption that the lipids, polysaccharides, and proteins react independently during HTL predicted biocrude yields for ternary mixtures more accurately than did a model with three additional parameters that allowed for the possibility of interactions between the different model compounds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Roles of Water for Chemical Reactions in High-Temperature Water
Akiya, N., & Savage, P. E. (2002) · Chemical Reviews · doi:10.1021/cr000668w · Cited by 1,581
Self-citationBiller, P., & Ross, A. B. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.028 · Cited by 1,131
Hydrothermal liquefaction and gasification of Nannochloropsis sp.
Brown, T. M., Duan, P., & Savage, P. E. (2010) · Energy & Fuels · doi:10.1021/ef100203u · Cited by 745
Self-citationHydrothermal liquefaction of a microalga with heterogeneous catalysts
Duan, P., & Savage, P. E. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie100758s · Cited by 608
Self-citationGarcia Alba, L., Torri, C., Samorì, C., van der Spek, J., Fabbri, D., Kersten, S. R. A., & Brilman, D. W. F. (. (2012) · Energy & Fuels · doi:10.1021/ef201415s · Cited by 477
Cited by
Zhang, B., Biswal, B. K., Zhang, J., & Balasubramanian, R. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00673 · Cited by 432
Valorization of hydrothermal liquefaction aqueous phase: pathways towards commercial viability
Watson, J., Wang, T., Si, B., Chen, W.-T., Aierzhati, A., & Zhang, Y. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100819 · Cited by 394
Hydrothermal carbonization and Liquefaction: differences, progress, challenges, and opportunities
Lachos-Perez, D., César Torres-Mayanga, P., Abaide, E. R., Zabot, G. L., & De Castilhos, F. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2021.126084 · Cited by 355
Deep Eutectic Solvents for Pretreatment, Extraction, and Catalysis of Biomass and Food Waste
Kalhor, P., & Ghandi, K. (2019) · Molecules · doi:10.3390/molecules24224012 · Cited by 305
Hydroprocessing of bio-crude from continuous hydrothermal liquefaction of microalgae
Biller, P., Sharma, B. K., Kunwar, B., & Ross, A. B. (2015) · Fuel · doi:10.1016/j.fuel.2015.06.077 · Cited by 291
Metadata
- Authors
- Teri, G., Luo, L., & Savage, P. E.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-11-26
- Volume
- 28
- Issue
- 12
- Pages
- 7501-7509
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2326041511
- Cited by
- 233
- References
- 6
- FWCI
- 7.28
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.