Pyrolysis of Polyvinyl Chloride (PVC)-Containing Mixed Plastic Wastes for Recovery of Hydrocarbons
The DOI matches its Crossref record.
Abstract
The pyrolysis of mixed plastic waste (high-density polyethylene, polypropylene, polystyrene, and polyvinyl chloride) using a long residence time (25 min) in a horizontal tube reactor at 530 °C has been investigated. The reactor was fitted with atmospheric and vacuum distillation columns, so that the pyrolysis products could be separated into heavy oil, light oil, gasoline, and gases. The effect of the polyvinyl chloride (PVC) concentration on the properties of products was investigated. Products were characterized using gas chromatography, infrared spectroscopy, and energy-dispersive X-ray spectroscopy, whereas some other standardized methods were used to determine the main properties of hydrocarbons. Results show that the mixed plastic waste samples could be converted into gases, gasoline, and light oil with yields of 36.9−59.6% depending upon the composition of feed polymers, and the conversion of decomposition is significantly increased with an increasing concentration of PVC. It was found that products mostly consisted of paraffin, olefin, and aromatic compounds, with carbon numbers of C 1 −C 4, C 5 −C 17, and C 11 −C 28 in the case of gases, gasoline, and light oil, respectively. Light aromatics (benzene, toluene, styrene, ethyl benzene, and xylenes) could be detected only in gasoline, while oligomers of styrene obtained by principal degradation of polystyrene were in heavy oil. Aromatics consist of mainly ethyl benzene and styrene. Gases and heavy oil had high caloric values of 46−47 and about 41 MJ/kg, respectively; therefore, they could also be used for energy generation. The favorable properties of all fractions were depreciated in consequence of increasing PVC content, because the concentration of chlorine increased with that. The highest chlorine content had been measured in gases, wherein the HCl was the dominant compound, which had succeeded to neutralize in a scrubber filled with a solution of calcium hydroxide.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Thermal degradation of PVC: A review
Yu, J., Sun, L., Ma, C., Qiao, Y., & Yao, H. (2016) · Waste Management · doi:10.1016/j.wasman.2015.11.041 · Cited by 1,049
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Why is recycling of postconsumer plastics so challenging?
Vogt, B. D., Stokes, K. K., & Kumar, S. K. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00648 · Cited by 385
Butler, E., Devlin, G., & McDonnell, K. (2011) · Waste and Biomass Valorization · doi:10.1007/s12649-011-9067-5 · Cited by 270
Pyrolysis for plastic waste management: An engineering perspective
Xayachak, T., Haque, N., Parthasarathy, R., King, S., Emami, N., Lau, D., & Pramanik, B. K. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108865 · Cited by 127
Carbon nanotubes synthetized from gaseous products of waste polymer pyrolysis and their application
Borsodi, N., Szentes, A., Miskolczi, N., Wu, C., & Liu, X. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.05.018 · Cited by 86
Self-citationYang, W.-T., Xie, Y.-Y., Xu, S.-M., Wu, G., & Wang, Y.-Z. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154054 · Cited by 40
Metadata
- Authors
- Miskolczi, N., Bartha, L., & Angyal, A.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-05-21
- Volume
- 23
- Issue
- 5
- Pages
- 2743-2749
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2002328189
- Cited by
- 100
- References
- 0
- FWCI
- 1.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.