The DOI matches its Crossref record.
Tar in Biomass Producer Gas, the Energy research Centre of The Netherlands (ECN) Experience: An Enduring Challenge
Abstract
Biomass gasification at temperatures below 1300 °C yields producer gas with a range of heavy hydrocarbons. These compounds, collectively known as tar, cause fouling and emission problems in equipment using the producer gas. This paper gives an overview of the work performed at the Energy research Centre of The Netherlands (ECN) on tar measurement, tar prevention, tar cracking, and tar removal. Much of the work has been performed in cooperation with partner institutes and industry. Measurement techniques discussed are the tar guideline, solid-phase adsorption (SPA) method, and tar dew point analyzer. On the subject of tar prevention, the effects of operating conditions, fuel composition, and bed materials in fluidized-bed gasifiers are covered. Tar cracking results are presented for catalytic materials, high-temperature treatment, and the use of plasma. ECN research on tar removal involves among others the development of the water-based GASREIP system and the oil-based OLGA technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Biomass gasification technology: The state of the art overview
Molino, A., Chianese, S., & Musmarra, D. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2015.11.005 · Cited by 1,058
Tar reduction in biomass producer gas via mechanical, catalytic and thermal methods: A review
Anis, S., & Zainal, Z. A. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.02.018 · Cited by 802
A review of cleaning technologies for biomass-derived syngas
Woolcock, P. J., & Brown, R. C. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2013.02.036 · Cited by 623
Reduction of tar generated during biomass gasification: A review
Valderrama Rios, M. L., González, A. M., Lora, E. E. S., & Almazán del Olmo, O. A. (2018) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2017.12.002 · Cited by 585
Commercial Biomass Syngas Fermentation.
Daniell, J., Köpke, M., & Simpson, S. (2012) · Energies · doi:10.3390/en5125372 · Cited by 444
You, S., Ok, Y. S., Chen, S. S., Tsang, D. C. W., Kwon, E. E., Lee, J., & Wang, C.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.177 · Cited by 421
A comprehensive review of primary strategies for tar removal in biomass gasification
Cortazar, M., Santamaria, L., Lopez, G., Alvarez, J., Zhang, L., Wang, R., Bi, X., & Olazar, M. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116496 · Cited by 390
Waste Gasification by Thermal Plasma: A Review
Fabry, F., Rehmet, C., Rohani, V., & Fulcheri, L. (2013) · Waste and Biomass Valorization · doi:10.1007/s12649-013-9201-7 · Cited by 297
You, S., Ok, Y. S., Tsang, D. C. W., Kwon, E. E., & Wang, C.-H. (2018) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2018.1518860 · Cited by 149
Metadata
- Authors
- Rabou, L. P. L. M., Zwart, R. W. R., Vreugdenhil, B. J., & Bos, L.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-12-17
- Volume
- 23
- Issue
- 12
- Pages
- 6189-6198
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2032196403
- Cited by
- 244
- References
- 0
- FWCI
- 5.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.