The DOI matches its Crossref record.
Upgrading Bio-oil through Emulsification with Biodiesel: Mixture Production
Abstract
There has been increasing interest in alternative fuels made from biomass, which is abundant and renewable. Bio-oil produced by fast pyrolysis of biomass is highly viscous and acidic and has a high water content. To overcome these problems as a fuel, a method of emulsifying bio-oil with biodiesel has been investigated. In the present study, various effects on the mixture stability have been examined. The optimal conditions for obtaining a stable mixture between bio-oil and biodiesel are with an octanol surfactant dosage of 4% by volume, initial bio-oil/biodiesel ratio of 4:6 by volume, stirring intensity of 1200 rpm, mixing time of 15 min, and emulsifying temperature at 30 °C. Furthermore, selected fuel properties, such as viscosity, density, water content, acid number, and average molecular weight, are measured for characterizing the bio-oil/biodiesel mixture. Thermogravimetric analysis (TGA) has been used to further evaluate the thermal properties. Data from the TGA and Fourier transform infrared (FTIR) analyses confirm the presence or absence of a certain group of chemical compounds in the mixture. The kinetic parameters for the thermal decomposition of the bio-oil, bio-oil/biodiesel-rich phase, and pyrolytic lignin-rich phase were obtained from the TGA experiments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Bio-oil production and upgrading research: A review
Xiu, S., & Shahbazi, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.028 · Cited by 1,127
Conversion of biomass to biofuels and life cycle assessment: a review
Osman, A. I., Mehta, N., Elgarahy, A. M., Al-Hinai, A., Al-Muhtaseb, A. H., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01273-0 · Cited by 761
Kumar, R., Strezov, V., Weldekidan, H., He, J., Singh, S., Kan, T., & Dastjerdi, B. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109763 · Cited by 542
A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading
Butler, E., Devlin, G., Meier, D., & McDonnell, K. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.035 · Cited by 471
Challenges and Opportunities for Bio-oil Refining: A Review
Pinheiro Pires, A. P., Arauzo, J., Fonts, I., Domine, M. E., Fernández Arroyo, A., Garcia-Perez, M. E., Montoya, J., Chejne, F., Pfromm, P., & Garcia-Perez, M. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00039 · Cited by 385
Upgrading of bio-oil from biomass fast pyrolysis in China: A review
Zhang, L., Liu, R., Yin, R., & Mei, Y. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.027 · Cited by 374
Influence of temperature on biomass pyrolysis in a conical spouted bed reactor
Amutio, M., Lopez, G., Artetxe, M., Elordi, G., Olazar, M., & Bilbao, J. (2012) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.04.002 · Cited by 345
A review of production and upgrading of algal bio-oil
Saber, M., Nakhshiniev, B., & Yoshikawa, K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.342 · Cited by 332
Pyrolysis liquids and gases as alternative fuels in internal combustion engines – A review
Hossain, A. K., & Davies, P. A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.12.031 · Cited by 280
Biomass pyrolysis technologies for value-added products: a state-of-the-art review
Amenaghawon, A. N., Anyalewechi, C. L., Okieimen, C. O., & Kusuma, H. S. (2021) · Environment, Development and Sustainability · doi:10.1007/s10668-021-01276-5 · Cited by 260
Upgrading of Bio-Oil Model Compounds and Bio-Crude into Biofuel by Electrocatalysis: A Review
Chen, G., Liang, L., Li, N., Lu, X., Yan, B., & Cheng, Z. (2021) · ChemSusChem · doi:10.1002/cssc.202002063 · Cited by 48
Recent advances in fluidized bed technology in biomass processes
Fouilland, T., Grace, J. R., & Ellis, N. (2010) · Biofuels · doi:10.4155/bfs.10.20 · Cited by 43
Self-citationMasoumi, S., Borugadda, V. B., & Dalai, A. K. (2020) · Biorefinery of Alternative Resources: Targeting Green Fuels and Platform Chemicals · doi:10.1007/978-981-15-1804-1_11 · Cited by 10
Metadata
- Authors
- Jiang, X., & Ellis, N.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-12-16
- Volume
- 24
- Issue
- 2
- Pages
- 1358-1364
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2009410358
- Cited by
- 162
- References
- 0
- FWCI
- 4.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.