CoChat

Pyrolysis of Mixed Plastic Wastes for the Recovery of Benzene, Toluene, and Xylene (BTX) Aromatics in a Fluidized Bed and Chlorine Removal by Applying Various Additives

Cho, Min-Hwan, Jung, Su-Hwa, Kim, Joo-Sik · 2010 · Energy & Fuels
Cited by 131

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

Mixed plastic wastes are very difficult to mechanically recycle into new products because of their nonhomogeneity. Therefore, pyrolysis and gasification seem to be very effective in the extraction of energy from mixed plastic wastes in the form of oil and gas. In this study, a fraction of mixed plastic wastes was pyrolyzed in a bench-scale plant equipped with a fluidized-bed reactor and a char removal system. This study has two aims. The first is to find out the optimum reaction temperature for a high yield of benzene, toluene, and xylene (BTX) aromatics. The second is to find out the best additive for chlorine removal. To find out the optimum reaction temperature for the maximum BTX content, experiments at a temperature range of 660−780 °C were carried out. The pyrolysis oils that were obtained from the experiments were composed of aliphatics and mono- and polyaromatic compounds. The reaction temperature had a positive effect on the BTX aromatics yield. The maximum BTX aromatics yield was obtained at 719 °C, with a value of 18 wt % of the organic product. The pyrolysis oils had almost no metal content. The metals that were present in the feed material were concentrated in the solid product, the char. It seems that the char removal system, which was composed of a cyclone and a hot filter, almost perfectly removed the char particles. Besides the pyrolysis oil, a combustible gas was also obtained. The main components of the gas were CH 4, C 2 H 4, C 3 H 6, C 4 H 6, and C 4 H 10 . The higher heating value of the product gas was about 50 MJ/kg. To absorb the hydrogen chloride that was formed from the degradation of the polyvinyl chloride (PVC) in the mixed plastic wastes, additives (calcium oxide, calcium hydroxide, crushed oyster shells, and rice straw) were added to a fraction of the mixed plastic wastes. In the experiments without any additive, the chlorine contents of the pyrolysis oils were 350−500 ppm. When the additives, especially calcium oxide, calcium hydroxide, and crushed oyster shells, were applied, the chlorine content of the pyrolysis oils significantly decreased to 50 ppm. The results of this study suggest that the use of oyster shells as a HCl absorbent can stimulate the recycling of waste oyster shells, which are abundant in Korea.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ef901127v

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Cho, M.-H., Jung, S.-H., & Kim, J.-S.
Venue
Energy & Fuels
Published
2009-12-15
Volume
24
Issue
2
Pages
1389-1395
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W1990277538
Cited by
131
References
1
FWCI
0.97
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.