TG, TG-MS, and FTIR Characterization of High-Yield Biomass Charcoals
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The pyrolysis and combustion characteristics of various high-yield charcoals manufactured in a process development unit were studied by thermogravimetry (TG), thermogravimetry−mass spectrometry (TG-MS), and Fourier transform infrared spectrometry (FTIR). Charcoals resulting from two runs with a macadamia nutshell feedstock and one run with a eucalyptus wood feedstock are compared. The peculiarities of devolatilization, oxygen gasification (temperature-programmed combustion), and the formation of nitrogen oxides are discussed. Small sample sizes (0.2−4 mg) were employed to minimize the effects of heat and mass transfer limitations; nevertheless the results offered a reliable characterization of kilograms of charcoal. Samples produced in different runs or taken from different parts of the reactor behaved similarly with only minor differences that we attribute to reactor inhomogeneities and variations in feedstock composition. In the presence of oxygen, two partial processes were detected. The lower temperature weight loss may be due to devolatilization of the char and oxidation of the volatile matter that results in a carbonized residue. The residue burns off around 450−500 °C. The rate of both processes evidenced strong dependence on oxygen concentration, indicating an unexpected influence of oxidation on the low-temperature devolatilization processes. The intensity of the mass-spectrometric ion signal for NO +, which represents the formation of nitrogen oxides, did not follow the overall mass loss rate curves (DTG). The peak temperatures of the NO + and DTG curves differed by 3−9 °C. These differences were influenced by the feedstock composition but did not depend on such operating conditions as the heating rate and oxygen concentration. Elevated pressure thermogravimetry revealed that a very high partial pressure of CO 2 in the carrier gas (577 kPa) has only negligible influence on the rate of the temperature-programmed combustion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kinetic modeling of biomass pyrolysis
Várhegyi, G., Antal, M. J., Jakab, E., & Szabó, P. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(96)00971-0 · Cited by 545
Self-citation
Cited by
The Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623
Self-citationAhmad, M., Lee, S. S., Dou, X., Mohan, D., Sung, J.-K., Yang, J. E., & Ok, Y. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.042 · Cited by 1,357
“Removing H2O, CO2, CO, CH4, and H2 from feedstock at >600 C have been known to contribute to a reduction of BC weight loss (Varhegyi et al., 1998).”
BackgroundPyrolysis for Biochar Purposes: A Review to Establish Current Knowledge Gaps and Research Needs
Manyà, J. J. (2012) · Environmental Science & Technology · doi:10.1021/es301029g · Cited by 836
Qambrani, N. A., Rahman, M. M., Won, S., Shim, S., & Ra, C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.057 · Cited by 774
Quality variations of poultry litter biochar generated at different pyrolysis temperatures
Song, W., & Guo, M. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.11.018 · Cited by 693
Metadata
- Authors
- Várhegyi, G., Szabó, P., Till, F., Zelei, B., Antal, M. J., & Dai, X.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-07-23
- Volume
- 12
- Issue
- 5
- Pages
- 969-974
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2008510099
- Cited by
- 87
- References
- 1
- FWCI
- 2.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: TG, TG-MS, and FTIR Characterization of High-Yield Biomass Charcoals. https://app.cochat.ai/papers/10.1021/ef9800359
- The paper
- Várhegyi, G., Szabó, P., Till, F., Zelei, B., Antal, M. J., & Dai, X. (1998). TG, TG-MS, and FTIR Characterization of High-Yield Biomass Charcoals. Energy & Fuels. https://doi.org/10.1021/ef9800359
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.