Universal Temperature Model for Shallow Algal Ponds Provides Improved Accuracy
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
While temperature is fundamental to the design and optimal operation of shallow algal ponds, there is currently no temperature model universally applicable to these systems. This paper presents a model valid for any opaque water body of uniform temperature profile. This new universal model was tested against 1 year of experimental data collected from a wastewater treatment high rate algal pond. On the basis of 1 year of data collected every 15 min, the average errors of the predicted afternoon peak and predawn minimum were both only 1.3 °C and the average error between these extremes was just 1.2 °C. In order to demonstrate the improvement in accuracy gained, the expressions for heat fluxes used in nine prior temperature models were systematically substituted into the new universal model and evaluated against the experimental data. Errors in the peak and minimum temperatures increased by up to 2.1 and 3.2 °C, respectively, while the error between these extremes increased by up to 2.9 °C. In practical applications, these levels of inaccuracies could lead to an under/overestimation of the algal productivity and the evaporative water loss by approximately 40% and 300%, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Increase in Chlorella strains calorific values when grown in low nitrogen medium
Illman, A. M., Scragg, A. H., & Shales, S. W. (2000) · Enzyme and Microbial Technology · doi:10.1016/s0141-0229(00)00266-0 · Cited by 1,008
The water footprint of bioenergy
Gerbens-Leenes, W., Hoekstra, A. Y., & van der Meer, T. H. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0812619106 · Cited by 774
Mechanistic Modeling of Broth Temperature in Outdoor Photobioreactors
Béchet, Q., Shilton, A., Fringer, O. B., Muñoz, R., & Guieysse, B. (2010) · Environmental Science & Technology · doi:10.1021/es903214u · Cited by 129
Self-citation
Cited by
Temperature effect on microalgae: A crucial factor for outdoor production
Ras, M., Steyer, J.-P., & Bernard, O. (2013) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-013-9310-6 · Cited by 532
Béchet, Q., Shilton, A., & Guieysse, B. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2013.08.014 · Cited by 430
Self-citationValidation of a simple model accounting for light and temperature effect on microalgal growth
Bernard, O., & Rémond, B. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.07.022 · Cited by 349
Microalgae cultivation in raceway ponds: advances, challenges, and hydrodynamic considerations
Skifa, I., Chauchat, N., Cocquet, P.-H., & Guer, Y. L. (2025) · EFB Bioeconomy Journal · doi:10.1016/j.bioeco.2024.100073 · Cited by 73
Apel, A. C., & Weuster-Botz, D. (2015) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-015-1363-1 · Cited by 69
Metadata
- Authors
- Béchet, Q., Shilton, A., Park, J. B. K., Craggs, R. J., & Guieysse, B.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-03-29
- Volume
- 45
- Issue
- 8
- Pages
- 3702-3709
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2318671548
- Cited by
- 108
- References
- 3
- FWCI
- 2.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.