The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Microwave-Induced Pyrolysis of Plastic Wastes
Abstract
The performance of a novel microwave-induced pyrolysis process was evaluated by studying the degradation of high-density polyethylene and aluminum/polymer laminates in a semibatch bench-scale apparatus. The results showed that the new process has the same general features as other, more traditional, pyrolytic processes but with the advantage that it is able to deal with problematic wastes such as laminates. Degradation experiments were performed between 500 and 700 °C and the relationship between temperature, residence time of the pyrolytic products in the reactor, and the chemical composition of the hydrocarbon fraction produced was investigated. Toothpaste tubing was used as an example of a laminated material to be treated with the novel process. Clean aluminum was recovered together with hydrocarbons and the trial proved that the process has excellent potential for the treatment of plastic wastes on a commercial scale.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock
Williams, P. T., & Williams, E. A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00011-x · Cited by 424
Interaction of Plastics in Mixed-Plastics Pyrolysis
Williams, P. T., & Williams, E. A. (1999) · Energy & Fuels · doi:10.1021/ef980163x · Cited by 360
Bockhorn, H., Hornung, A., & Hornung, U. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00026-1 · Cited by 231
Gas product distribution from polyethylene pyrolysis
Faravelli, T., Bozzano, G., Scassa, C., Perego, M., Fabini, S., Ranzi, E., & Dente, M. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00032-7 · Cited by 114
Thermal degradation of mixed plastic waste to aromatics and gas
Kaminsky, W., Schlesselmann, B., & Simon, C. M. (1996) · Polymer Degradation and Stability · doi:10.1016/0141-3910(96)00087-0 · Cited by 114
McCaffrey, W. C., Kamal, M. R., & Cooper, D. G. (1995) · Polymer Degradation and Stability · doi:10.1016/0141-3910(94)00096-q · Cited by 84
Comparison between the Pyrolysis of Two Types of Polyethylenes in a Fluidized Bed Reactor
Conesa, J. A., Font, R., & Marcilla, A. F. (1997) · Energy & Fuels · doi:10.1021/ef960098w · Cited by 63
Darivakis, G. S., Howard, J. B., & Peters, W. (1990) · Combustion Science and Technology · doi:10.1080/00102209008951692 · Cited by 54
McCaffrey, W. C., Cooper, D. G., & Kamal, M. R. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(98)00036-6 · Cited by 48
Ballice, L., Yüksel, M., Sağlam, M., et al. (1998) · Energy & Fuels · doi:10.1021/ef980004d · Cited by 35
Particles versus fibrillar morphology in polyolefin ternary blends
Kim, B. K., & Do, I. H. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960620)60:12<2133::aid-app10>3.0.co;2-8 · Cited by 30
Cited by
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Metadata
- Authors
- Ludlow-Palafox, C., & Chase, H. A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-10-01
- Volume
- 40
- Issue
- 22
- Pages
- 4749-4756
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2055493903
- Cited by
- 261
- References
- 11
- FWCI
- 2.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
