The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Microwave-Induced Pyrolysis of Plastic Wastes
Abstract
The performance of a novel microwave-induced pyrolysis process was evaluated by studying the degradation of high-density polyethylene and aluminum/polymer laminates in a semibatch bench-scale apparatus. The results showed that the new process has the same general features as other, more traditional, pyrolytic processes but with the advantage that it is able to deal with problematic wastes such as laminates. Degradation experiments were performed between 500 and 700 °C and the relationship between temperature, residence time of the pyrolytic products in the reactor, and the chemical composition of the hydrocarbon fraction produced was investigated. Toothpaste tubing was used as an example of a laminated material to be treated with the novel process. Clean aluminum was recovered together with hydrocarbons and the trial proved that the process has excellent potential for the treatment of plastic wastes on a commercial scale.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock
Williams, P. T., & Williams, E. A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00011-x · Cited by 424
Interaction of Plastics in Mixed-Plastics Pyrolysis
Williams, P. T., & Williams, E. A. (1999) · Energy & Fuels · doi:10.1021/ef980163x · Cited by 360
Bockhorn, H., Hornung, A., & Hornung, U. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00026-1 · Cited by 231
Gas product distribution from polyethylene pyrolysis
Faravelli, T., Bozzano, G., Scassa, C., Perego, M., Fabini, S., Ranzi, E., & Dente, M. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00032-7 · Cited by 114
Thermal degradation of mixed plastic waste to aromatics and gas
Kaminsky, W., Schlesselmann, B., & Simon, C. M. (1996) · Polymer Degradation and Stability · doi:10.1016/0141-3910(96)00087-0 · Cited by 114
McCaffrey, W. C., Kamal, M. R., & Cooper, D. G. (1995) · Polymer Degradation and Stability · doi:10.1016/0141-3910(94)00096-q · Cited by 84
Comparison between the Pyrolysis of Two Types of Polyethylenes in a Fluidized Bed Reactor
Conesa, J. A., Font, R., & Marcilla, A. F. (1997) · Energy & Fuels · doi:10.1021/ef960098w · Cited by 63
Darivakis, G. S., Howard, J. B., & Peters, W. (1990) · Combustion Science and Technology · doi:10.1080/00102209008951692 · Cited by 54
McCaffrey, W. C., Cooper, D. G., & Kamal, M. R. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(98)00036-6 · Cited by 48
Ballice, L., Yüksel, M., Sağlam, M., et al. (1998) · Energy & Fuels · doi:10.1021/ef980004d · Cited by 35
Cited by
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Microwave heating applications in environmental engineering—a review
Jones, D. A., Lelyveld, T. P., Mavrofidis, S. D., Kingman, S. W., & Miles, N. J. (2002) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(01)00088-x · Cited by 966
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Pyrolysis of plastic waste: Opportunities and challenges
Qureshi, M. S., Oasmaa, A., Pihkola, H., Deviatkin, I., Tenhunen, A., Mannila, J., Minkkinen, H., Pohjakallio, M., & Laine-Ylijoki, J. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104804 · Cited by 778
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
A review on the microwave-assisted pyrolysis technique
Motasemi, F., & Afzal, M. T. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.08.008 · Cited by 633
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Microwave-initiated catalytic deconstruction of plastic waste into hydrogen and high-value carbons
Jie, X., Li, W., Slocombe, D., Gao, Y., Banerjee, I., Gonzalez-Cortes, S., Yao, B., AlMegren, H., Alshihri, S., Dilworth, J., et al. (2020) · Nature Catalysis · doi:10.1038/s41929-020-00518-5 · Cited by 611
A review on catalytic pyrolysis of plastic wastes to high-value products
Peng, Y., Wang, Y., Ke, L., Dai, L., Wu, Q., Cobb, K., Zeng, Y., Zou, R., Liu, Y., & Ruan, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115243 · Cited by 538
Kitchen, H. J., Vallance, S. R., Kennedy, J. L., Tapia-Ruiz, N., Carassiti, L., Harrison, A., Whittaker, A. G., Drysdale, T. D., Kingman, S. W., & Gregory, D. H. (2014) · Chemical Reviews · doi:10.1021/cr4002353 · Cited by 511
A review on the susceptor assisted microwave processing of materials
Bhattacharya, M., & Basak, T. (2016) · Energy · doi:10.1016/j.energy.2015.11.034 · Cited by 457
Technologies for chemical recycling of household plastics – a technical review and TRL assessment
Solis, M., & Silveira, S. (2020) · Waste Management · doi:10.1016/j.wasman.2020.01.038 · Cited by 451
Progress in waste oil to sustainable energy, with emphasis on pyrolysis techniques
Lam, S. S., Liew, R. K., Jusoh, A., Chong, C. T., Ani, F. N., & Chase, H. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.005 · Cited by 355
Self-citationA Review on Waste to Energy Processes Using Microwave Pyrolysis
Lam, S. S., & Chase, H. A. (2012) · Energies · doi:10.3390/en5104209 · Cited by 350
Self-citationPyrolysis of Polystyrene Waste: A Review
Maafa, I. (2021) · Polymers · doi:10.3390/polym13020225 · Cited by 311
Microwave technology for energy-efficient processing of waste
Appleton, T. J., Colder, R. I., Kingman, S. W., Lowndes, I. S., & Read, A. G. (2005) · Applied Energy · doi:10.1016/j.apenergy.2004.07.002 · Cited by 308
Liu, Q.-S., Zheng, T., Li, N., Wang, P., & Abulikemu, G. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2009.12.025 · Cited by 306
Ding, K., Liu, S., Huang, Y., Liu, S., Zhou, N., Peng, P., Wang, Y., Chen, P., & Ruan, R. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.07.001 · Cited by 294
Microwave induced pyrolysis of oil palm biomass
Salema, A. A., & Ani, F. N. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.09.115 · Cited by 294
Zhang, X., Lei, H., Yadavalli, G., Zhu, L., Wei, Y., & Liu, Y. (2015) · Fuel · doi:10.1016/j.fuel.2014.12.013 · Cited by 285
A review on gasification and pyrolysis of waste plastics
Shah, H. H., Amin, M., Iqbal, A., Nadeem, I., Kalin, M., Soomar, A. M., & Galal, A. M. (2023) · Frontiers in Chemistry · doi:10.3389/fchem.2022.960894 · Cited by 269
Valorization of packaging plastic waste by slow pyrolysis
Das, P., & Tiwari, P. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.025 · Cited by 264
Microwave and slow pyrolysis biochar—Comparison of physical and functional properties
Mašek, O., Budarin, V., Gronnow, M., Crombie, K., Brownsort, P., Fitzpatrick, E., & Hurst, P. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.11.015 · Cited by 256
Total recovery of resources and energy from rice straw using microwave-induced pyrolysis
Huang, Y. F., Kuan, W. H., Lo, S. L., & Lin, C. F. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2008.03.026 · Cited by 253
The integration of green chemistry into future biorefineries
H. Clark, J., E. I. Deswarte, F., & J. Farmer, T. (2009) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.119 · Cited by 241
Microwave Heating Applied to Pyrolysis
Fernandez, Y., Arenillas, A., & Angel, J. (2011) · Advances in Induction and Microwave Heating of Mineral and Organic Materials · doi:10.5772/13548 · Cited by 163
Microwave-Mediated Pyrolysis of Macro-Algae
Budarin, V. L., Zhao, Y., Gronnow, M. J., Shuttleworth, P. S., Breeden, S. W., Macquarrie, D. J., & Clark, J. H. (2011) · Green Chemistry · doi:10.1039/c1gc15560a · Cited by 97
Pérez-Huertas, S., Calero, M., Ligero, A., Pérez, A., Terpiłowski, K., & Martín-Lara, M. A. (2023) · Waste Management · doi:10.1016/j.wasman.2023.02.022 · Cited by 45
Influence of density on microwave pyrolysis of cellulose
Fan, J., Shuttleworth, P. S., Gronnow, M., Breeden, S. W., Clark, J. H., Macquarrie, D. J., & Budarin, V. L. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00280 · Cited by 24
Yadav, N., Yadav, G., Bakthavachalam, V., Potturaja, L., Roy, J. K., & Elumalai, S. (2025) · Bioresource Technology · doi:10.1016/j.biortech.2024.131948 · Cited by 20
Metadata
- Authors
- Ludlow-Palafox, C., & Chase, H. A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-10-01
- Volume
- 40
- Issue
- 22
- Pages
- 4749-4756
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2055493903
- Cited by
- 261
- References
- 11
- FWCI
- 2.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.