The DOI matches its Crossref record.
Carbon Dioxide Capture by Diamine-Grafted SBA-15: A Combined Fourier Transform Infrared and Mass Spectrometry Study
Abstract
The adsorption and desorption of CO 2 on diamine-grafted SBA-15 have been studied by infrared spectroscopy coupled with mass spectrometry. Diamine was grafted onto the SBA-15 surface by the reaction of [ N -(2-aminoethyl)-3-aminopropyl]trimethoxysilane with the surface OH. CO 2 is adsorbed on the diamine-grafted SBA-15 as bidentate carbonate and bidentate and monodentate bicarbonates at 25 °C. Bidentate carbonate and monodentate bicarbonates are the major surface species formed and decomposed during the concentration-swing adsorption/desorption process at 25 °C. Temperature-programmed desorption revealed that the monodentate and bidentate bicarbonates bound stronger to the diamine-grafted SBA-15 surface than the bidentate carbonate. The amount of CO 2 desorbed from the carbonate and bicarbonate between 30 and 120 °C is 2 times more than that of CO 2 adsorbed/desorbed during each cycle of the concentration-swing adsorption/desorption. Desorption at 120 °C removes the majority of the captured CO 2 and regenerates the sorbent for CO 2 capture at low temperature. Regeneration of the sorbent with temperature-swing adsorption gives a significantly higher CO 2 capture capacity than concentration-swing adsorption. The use of a diamine-grafted sorbent, with an adsorption capacity of more than 1000 μmol/g of sorbent and a temperature-swing adsorption process, could be a cost-effective alternative to capture CO 2 from power plant flue gases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Silica‐Based Mesoporous Organic–Inorganic Hybrid Materials
Hoffmann, F., Cornelius, M., Morell, J., & Fröba, M. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503075 · Cited by 3,089
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
Hicks, J. C., Drese, J. H., Fauth, D. J., Gray, M. L., Qi, G., & Jones, C. W. (2008) · Journal of the American Chemical Society · doi:10.1021/ja077795v · Cited by 758
Self-citationPorous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
McDonald, T. M., D'Alessandro, D. M., Krishna, R., & Long, J. R. (2011) · Chemical Science · doi:10.1039/c1sc00354b · Cited by 522
Carbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Amine functionalised metal organic frameworks (MOFs) as adsorbents for carbon dioxide
Arstad, B., Fjellvåg, H., Kongshaug, K. O., Swang, O., & Blom, R. (2008) · Adsorption · doi:10.1007/s10450-008-9137-6 · Cited by 472
Application of Amine-Tethered Solid Sorbents for Direct CO2 Capture from the Ambient Air
Choi, S., Drese, J. H., Eisenberger, P. M., & Jones, C. W. (2011) · Environmental Science & Technology · doi:10.1021/es102797w · Cited by 466
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Amine-Based Nanofibrillated Cellulose As Adsorbent for CO2 Capture from Air
Gebald, C., Wurzbacher, J. A., Tingaut, P., Zimmermann, T., & Steinfeld, A. (2011) · Environmental Science & Technology · doi:10.1021/es202223p · Cited by 457
CO2 Capture by As‐Prepared SBA‐15 with an Occluded Organic Template
Yue, M. B., Chun, Y., Cao, Y., Dong, X., & Zhu, J. H. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600427 · Cited by 424
Thermal and Chemical Stability of Regenerable Solid Amine Sorbent for CO2 Capture
Khatri, R. A., Chuang, S. S. C., Soong, Y., & Gray, M. (2006) · Energy & Fuels · doi:10.1021/ef050402y · Cited by 421
Self-citationAmine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
Amine-modified ordered mesoporous silica: Effect of pore size on carbon dioxide capture
Zeleňák, V., Badaničová, M., Halamová, D., Čejka, J., Zukal, A., Murafa, N., & Goerigk, G. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.07.025 · Cited by 395
Wang, X., Schwartz, V., Clark, J. C., Ma, X., Overbury, S. H., Xu, X., & Song, C. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp809946y · Cited by 381
Chen, C., Yang, S.-T., Ahn, W.-S., & Ryoo, R. (2009) · Chemical Communications · doi:10.1039/b905589d · Cited by 340
Harnessing Filler Materials for Enhancing Biogas Separation Membranes
Chuah, C. Y., Goh, K., Yang, Y., Gong, H., Li, W., Karahan, H. E., Guiver, M. D., Wang, R., & Bae, T.-H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00091 · Cited by 339
Silica-templated melamine–formaldehyde resin derived adsorbents for CO2 capture
Pevida, C., Drage, T. C., & Snape, C. E. (2008) · Carbon · doi:10.1016/j.carbon.2008.06.026 · Cited by 321
Efficient CO2 Capturer Derived from As‐Synthesized MCM‐41 Modified with Amine
Yue, M. B., Sun, L. B., Cao, Y., Wang, Y., Wang, Z. J., & Zhu, J. H. (2008) · Chemistry – A European Journal · doi:10.1002/chem.200701467 · Cited by 318
Bacsik, Z., Ahlsten, N., Ziadi, A., Zhao, G., Garcia-Bennett, A. E., Martín-Matute, B., & Hedin, N. (2011) · Langmuir · doi:10.1021/la202033p · Cited by 308
Zelenak, V., Halamova, D., Gaberova, L., Bloch, E., & Llewellyn, P. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.04.023 · Cited by 297
Mesoporöse organisch‐anorganische Hybridmaterialien auf Silicabasis
Hoffmann, F., Cornelius, M., Morell, J., & Fröba, M. (2006) · Angewandte Chemie · doi:10.1002/ange.200503075 · Cited by 288
Synthesis–Structure–Property Relationships for Hyperbranched Aminosilica CO2 Adsorbents
Drese, J. H., Choi, S., Lively, R. P., Koros, W. J., Fauth, D. J., Gray, M. L., & Jones, C. W. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901461 · Cited by 287
Self-citationAmine-Modified SBA-15: Effect of Pore Structure on the Performance for CO2 Capture
Yan, X., Zhang, L., Zhang, Y., Yang, G., & Yan, Z. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie101240d · Cited by 275
Promoting the CO2 adsorption in the amine-containing SBA-15 by hydroxyl group
Yue, M. B., Sun, L. B., Cao, Y., Wang, Z. J., Wang, Y., Yu, Q., & Zhu, J. H. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.12.016 · Cited by 261
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Factors affecting the direct mineralization of CO2 with olivine
Kwon, S., Fan, M., DaCosta, H. F. M., & Russell, A. G. (2011) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(10)60555-4 · Cited by 75
Development of TREN dendrimers over mesoporous SBA-15 for CO2 adsorption
Bhagiyalakshmi, M., Park, S. D., Cha, W. S., & Jang, H. T. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.04.066 · Cited by 40
Metadata
- Authors
- Khatri, R. A., Chuang, S. S. C., Soong, Y., & Gray, M.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-03-30
- Volume
- 44
- Issue
- 10
- Pages
- 3702-3708
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1999405108
- Cited by
- 220
- References
- 0
- FWCI
- 18.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.