The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Ethylenediamine-Modified SBA-15 as Regenerable CO2 Sorbent
Abstract
The CO 2 adsorption properties of an ethylenediamine-modified mesoporous silica, EDA-SBA-15, have been examined. Adsorption isotherms were collected by TGA measurements, and the breakthrough time and adsorption capacity were measured using a fixed-bed flow system. The EDA-SBA-15 sorbent adsorbs around 20 mg/g of CO 2 from 15% CO 2 in N 2 at 25 °C and 1 atm total pressure. In pure CO 2 at 1 atm, its adsorption capacity is 86 mg/g at 22 °C. The EDA-SBA-15 sorbent is fully regenerable by thermal swings during cyclic adsorption/desorption. Desorption of CO 2 occurs at 110 °C on EDA-SBA-15 and the sorbent is stable in air up to 200 °C. The CO 2 uptake by EDA-SBA-15 is not influenced by humidity. The adsorption capacity data are compared with those of previously reported amine-modified silica sorbents.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zhao, D., Huo, Q., Feng, J., Chmelka, B. F., & Stucky, G. D. (1998) · Journal of the American Chemical Society · doi:10.1021/ja974025i · Cited by 6,697
Xu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Huh, S., Wiench, J. W., Yoo, J.-C., Pruski, M., & Lin, V. S.-Y. (2003) · Chemistry of Materials · doi:10.1021/cm0210041 · Cited by 787
Xu, X., Song, C., Andrésen, J. M., Miller, B. G., & Scaroni, A. W. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00388-3 · Cited by 769
White, C. M., Strazisar, B. R., Granite, E. J., Hoffman, J. S., & Pennline, H. W. (2003) · Journal of the Air & Waste Management Association · doi:10.1080/10473289.2003.10466206 · Cited by 751
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Silicon-29 NMR study of the surface of silica gel by cross polarization and magic-angle spinning
Maciel, G. E., & Sindorf, D. W. (1980) · Journal of the American Chemical Society · doi:10.1021/ja00545a056 · Cited by 522
In-Situ Infrared Study of CO2 Adsorption on SBA-15 Grafted with γ-(Aminopropyl)triethoxysilane
Chang, A. C. C., Chuang, S. S. C., Gray, M., & Soong, Y. (2003) · Energy & Fuels · doi:10.1021/ef020176h · Cited by 389
Satyapal, S., Filburn, T., Trela, J., & Strange, J. (2001) · Energy & Fuels · doi:10.1021/ef0002391 · Cited by 389
Reversible adsorption of carbon dioxide on amine surface-bonded silica gel
Leal, O., Bolívar, C., Ovalles, C., García, J. J., & Espidel, Y. (1995) · Inorganica Chimica Acta · doi:10.1016/0020-1693(95)04534-1 · Cited by 361
Cited by
Silica‐Based Mesoporous Organic–Inorganic Hybrid Materials
Hoffmann, F., Cornelius, M., Morell, J., & Fröba, M. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503075 · Cited by 3,089
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Hicks, J. C., Drese, J. H., Fauth, D. J., Gray, M. L., Qi, G., & Jones, C. W. (2008) · Journal of the American Chemical Society · doi:10.1021/ja077795v · Cited by 758
Porous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Carbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Qi, G., Wang, Y., Estevez, L., Duan, X., Anako, N., Park, A.-H. A., Li, W., Jones, C. W., & Giannelis, E. P. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00213e · Cited by 507
CO2 capture by adsorption with nitrogen enriched carbons
Plaza, M. G., Pevida, C., Arenillas, A., Rubiera, F., & Pis, J. J. (2007) · Fuel · doi:10.1016/j.fuel.2007.06.001 · Cited by 505
Harlick, P. J. E., & Sayari, A. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060774+ · Cited by 488
Amine functionalised metal organic frameworks (MOFs) as adsorbents for carbon dioxide
Arstad, B., Fjellvåg, H., Kongshaug, K. O., Swang, O., & Blom, R. (2008) · Adsorption · doi:10.1007/s10450-008-9137-6 · Cited by 472
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Comparative Study of CO2 Capture by Carbon Nanotubes, Activated Carbons, and Zeolites
Lu, C., Bai, H., Wu, B., Su, F., & Hwang, J. F. (2008) · Energy & Fuels · doi:10.1021/ef8000086 · Cited by 422
Thermal and Chemical Stability of Regenerable Solid Amine Sorbent for CO2 Capture
Khatri, R. A., Chuang, S. S. C., Soong, Y., & Gray, M. (2006) · Energy & Fuels · doi:10.1021/ef050402y · Cited by 421
Amine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
Adsorption of CO2 on Amine-Functionalized Y-Type Zeolites
Su, F., Lu, C., Kuo, S.-C., & Zeng, W. (2010) · Energy & Fuels · doi:10.1021/ef901077k · Cited by 359
Harnessing Filler Materials for Enhancing Biogas Separation Membranes
Chuah, C. Y., Goh, K., Yang, Y., Gong, H., Li, W., Karahan, H. E., Guiver, M. D., Wang, R., & Bae, T.-H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00091 · Cited by 339
Membrane processes for post-combustion carbon dioxide capture: A parametric study
BOUNACEUR, R., LAPE, N., ROIZARD, D., VALLIERES, C., & FAVRE, E. (2006) · Energy · doi:10.1016/j.energy.2005.10.038 · Cited by 314
Capture of CO2 from flue gas via multiwalled carbon nanotubes
Su, F., Lu, C., Cnen, W., Bai, H., & Hwang, J. F. (2009) · Science of The Total Environment · doi:10.1016/j.scitotenv.2009.01.007 · Cited by 311
Bacsik, Z., Ahlsten, N., Ziadi, A., Zhao, G., Garcia-Bennett, A. E., Martín-Matute, B., & Hedin, N. (2011) · Langmuir · doi:10.1021/la202033p · Cited by 308
Mesoporöse organisch‐anorganische Hybridmaterialien auf Silicabasis
Hoffmann, F., Cornelius, M., Morell, J., & Fröba, M. (2006) · Angewandte Chemie · doi:10.1002/ange.200503075 · Cited by 288
Amine-Modified SBA-15: Effect of Pore Structure on the Performance for CO2 Capture
Yan, X., Zhang, L., Zhang, Y., Yang, G., & Yan, Z. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie101240d · Cited by 275
Metadata
- Authors
- Zheng, F., Tran, D. N., Busche, B. J., Fryxell, G. E., Addleman, R. S., Zemanian, T. S., & Aardahl, C. L.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-03-25
- Volume
- 44
- Issue
- 9
- Pages
- 3099-3105
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2012365839
- Cited by
- 261
- References
- 14
- FWCI
- 17.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.