The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Sorbent Cost and Performance in CO2 Capture Systems
Abstract
Power plants are prime candidates to apply CO 2 capture for final storage as a mitigation option for climate change. Many CO 2 capture concepts make use of a sorption−desorption cycle to separate CO 2 from flue gas or O 2 from air. These include commercial absorption processes, as well as processes using new sorbent formulations, adsorption, and high-temperature chemical looping cycles for CO 2 and O 2 . All of these new processes must confront the large scale of carbon flows typical in a power plant. In this work, a common mass balance for all of these processes is used to define a parameter that highlights the minimum sorbent performance required to keep sorbent makeup costs at an acceptable level. A well-established reference system for which reliable commercial data exist (absorption with monoethanolamine, MEA) is used as a technoeconomic baseline to show that some of the sorbents being proposed in the open literature might need to be tested under laboratory conditions for tens of thousands of sorption−desorption cycles before they can be further considered as viable options for CO 2 capture from power plants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Self-citationA Twin Fluid-Bed Reactor for Removal of CO2 from Combustion Processes
Shimizu, T., Hirama, T., Hosoda, H., Kitano, K., Inagaki, M., & Tejima, K. (1999) · Chemical Engineering Research and Design · doi:10.1205/026387699525882 · Cited by 730
Gupta, H., & Fan, L.-S. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010867l · Cited by 541
Peer Reviewed: What Future for Carbon Capture and Sequestration?
Herzog, H. J. (2001) · Environmental Science & Technology · doi:10.1021/es012307j · Cited by 533
The maximum capture efficiency of CO2 using a carbonation/calcination cycle of CaO/CaCO3
Abánades, J. C. (2002) · Chemical Engineering Journal · doi:10.1016/s1385-8947(02)00126-2 · Cited by 517
Sorption‐enhanced reaction process for hydrogen production
Hufton, J. R., Mayorga, S., & Sircar, S. (1999) · AIChE Journal · doi:10.1002/aic.690450205 · Cited by 483
Mattisson, T., Lyngfelt, A., & Cho, P. (2001) · Fuel · doi:10.1016/s0016-2361(01)00051-5 · Cited by 400
Capture of CO2 from combustion gases in a fluidized bed of CaO
Abanades, J. C., Anthony, E. J., Lu, D. Y., Salvador, C., & Alvarez, D. (2004) · AIChE Journal · doi:10.1002/aic.10132 · Cited by 373
Self-citationMattisson, T., Järdnäs, A., & Lyngfelt, A. (2003) · Energy & Fuels · doi:10.1021/ef020151i · Cited by 331
Proceedings of 11th International Conference on Greenhouse Gas Control Technologies
Gibbins, J., Chalmers, H., Lucquiaud, M., Davison, J., Li, J., Liang, X., & McGlashan, N. R. (2012) · Cited by 323
Enhancement of CaO for CO2 capture in an FBC environment
Salvador, C., Lu, D., Anthony, E. J., & Abanades, J. C. (2003) · Chemical Engineering Journal · doi:10.1016/j.cej.2003.08.011 · Cited by 273
Self-citationObersteiner, M., Azar, C., Kauppi, P., Möllersten, K., Moreira, J., Nilsson, S., Read, P., Riahi, K., Schlamadinger, B., Yamagata, Y., et al. (2001) · Science · doi:10.1126/science.294.5543.786b · Cited by 267
A Novel Method of CO 2 Capture from High Temperature Gases
Nakagawa, K., & Ohashi, T. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838462 · Cited by 265
SILABAN, A., & HARRISON, D. P. (1995) · Chemical Engineering Communications · doi:10.1080/00986449508936375 · Cited by 201
Kinetics of carbon dioxide sorption on potassium-doped lithium zirconate
Xiong, R., Ida, J., & Lin, Y. S. (2003) · Chemical Engineering Science · doi:10.1016/s0009-2509(03)00319-1 · Cited by 196
Developing an innovative method, HyPr-RING, to produce hydrogen from hydrocarbons
Lin, S. Y., Suzuki, Y., Hatano, H., & Harada, M. (2002) · Energy Conversion and Management · doi:10.1016/s0196-8904(02)00014-6 · Cited by 185
Hayashi, H., Taniuchi, J., Furuyashiki, N., Sugiyama, S., Hirano, S., Shigemoto, N., & Nonaka, T. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9704455 · Cited by 177
CO2 Acceptor Gasification Process: Studies of Acceptor Properties
CURRAN, G. P., FINK, C. E., & GORIN, E. (1967) · Advances in Chemistry · doi:10.1021/ba-1967-0069.ch010 · Cited by 171
The 29th Annual International Pittsburgh Coal Conference
(2013) · International Journal of Coal Geology · doi:10.1016/j.coal.2013.07.001 · Cited by 121
Analysis of the sorbent energy transfer system (SETS) for power generation and CO2 capture
Yu, J. M., Corripio, A. B., Harrison, D. P., & Copeland, R. J. (2003) · Advances in Environmental Research · doi:10.1016/s1093-0191(02)00003-5 · Cited by 56
Capture of carbon dioxide from flue gas using solid regenerable sorbents
Green, D. A., Turk, B. S., Gupta, R., Portzer, J. W., McMichael, W. J., & Harrison, D. P. (2004) · International Journal of Environmental Technology and Management · doi:10.1504/ijetm.2004.004631 · Cited by 24
Ryu, H. J., BAE, D., & Jin, G.-T. (2003) · Elsevier eBooks · doi:10.1016/b978-008044276-1/50028-3 · Cited by 10
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Progress in carbon dioxide separation and capture: A review
Yang, H., Xu, Z., Fan, M., Gupta, R., Slimane, R. B., Bland, A. E., & Wright, I. (2008) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)60002-9 · Cited by 2,087
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
The calcium looping cycle for large-scale CO2 capture
Blamey, J., Anthony, E. J., Wang, J., & Fennell, P. S. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.10.001 · Cited by 1,044
Self-citationBARELLI, L., BIDINI, G., GALLORINI, F., & SERVILI, S. (2008) · Energy · doi:10.1016/j.energy.2007.10.018 · Cited by 779
Metadata
- Authors
- Abanades, J. C., Rubin, E. S., & Anthony, E. J.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-05-26
- Volume
- 43
- Issue
- 13
- Pages
- 3462-3466
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2161133920
- Cited by
- 308
- References
- 22
- FWCI
- 29.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.