The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
CO2 Capture Capacity of CaO in Long Series of Carbonation/Calcination Cycles
Abstract
Calcium oxide can be an effective sorbent to separate CO 2 at high temperatures. When coupled with a calcination step to produce pure CO 2, the carbonation reaction is the basis for several high-temperature CO 2 capture systems. The evolution with cycling of the capture capacity of CaO derived from natural limestones is experimentally investigated in this work. Long series of carbonation/calcination cycles (up to 500) varying different variables affecting sorbent capacity have been tested in a thermogravimetric apparatus. Calcination temperatures above T > 950 °C and very long calcination times accelerate the decay in sorption capacity, while other variables have a comparatively modest effect on the overall sorbent performance. A residual conversion of about 7−8% that remains constant after many hundreds of cycles and that seems insensitive to process conditions has been found. This residual conversion makes very attractive the carbonation/calcination cycle, by reducing (or even eliminating) sorbent purge rates in the system. A semiempirical equation has been proposed to describe sorbent conversion with the number of cycles based on these new long data series.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1996) · Environmental Science and Pollution Research · doi:10.1007/bf02986817 · Cited by 1,349
A Twin Fluid-Bed Reactor for Removal of CO2 from Combustion Processes
Shimizu, T., Hirama, T., Hosoda, H., Kitano, K., Inagaki, M., & Tejima, K. (1999) · Chemical Engineering Research and Design · doi:10.1205/026387699525882 · Cited by 730
Conversion Limits in the Reaction of CO2with Lime
Abanades, J. C., & Alvarez, D. (2003) · Energy & Fuels · doi:10.1021/ef020152a · Cited by 716
Self-citationGupta, H., & Fan, L.-S. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010867l · Cited by 541
The reversibility of the reaction CaCO3 ⇄ CaO+CO2
Barker, R. (1973) · Journal of Applied Chemistry and Biotechnology · doi:10.1002/jctb.5020231005 · Cited by 508
Fluidized Bed Combustion Systems Integrating CO2Capture with CaO
Abanades, J. C., Anthony, E. J., Wang, J., & Oakey, J. E. (2005) · Environmental Science & Technology · doi:10.1021/es0496221 · Cited by 425
Self-citationSulfation phenomena in fluidized bed combustion systems
Anthony, E. J., & Granatstein, D. L. (2001) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(00)00021-6 · Cited by 412
Determination of the Critical Product Layer Thickness in the Reaction of CaO with CO2
Alvarez, D., & Abanades, J. C. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050305s · Cited by 401
Self-citationCalcium Oxide Based Sorbents for Capture of Carbon Dioxide at High Temperatures
Lu, H., Reddy, E. P., & Smirniotis, P. G. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051325x · Cited by 316
Sorbent Cost and Performance in CO2 Capture Systems
Abanades, J. C., Rubin, E. S., & Anthony, E. J. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049962v · Cited by 308
Self-citation
Research works printed but not linked: 10
- Special Report, 2005, Intergovernmental Panel on Climate Change
- Collot A. G., 2003, Prospects for hydrogen from coal
- Bathia S. K., 1983, AIChE J., 39, 79
- Bandi A, 1976, Thermochim. Acta, 14, 221, 10.1016/0040-6031(76)80070-6 · doi:10.1016/0040-6031(76)80070-6
- Wang J., 2004, Fuel, 83, 1341, 10.1016/j.fuel.2004.01.002 · doi:10.1016/j.fuel.2004.01.002
- Deutch Y., 1991, Thermochim. Acta, 182, 77, 10.1016/0040-6031(91)87010-T · doi:10.1016/0040-6031(91)87010-t
- Wang J., 2005, Ind. Eng. Chem. Res.., 44, 627, 10.1021/ie0493154 · doi:10.1021/ie0493154
- Bartholomew C. H., 1993, A: Gen.
- Corella J., 1988, Ind. Eng. Chem. Res., 27, 375, 10.1021/ie00075a002 · doi:10.1021/ie00075a002
- Abanades J. C., 2005, International Conference on Coal Science and Technology
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
The calcium looping cycle for large-scale CO2 capture
Blamey, J., Anthony, E. J., Wang, J., & Fennell, P. S. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.10.001 · Cited by 1,044
Carbon capture and storage using alkaline industrial wastes
Bobicki, E. R., Liu, Q., Xu, Z., & Zeng, H. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.11.002 · Cited by 666
Sorption-Enhanced Hydrogen Production: A Review
Harrison, D. P. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800298z · Cited by 556
Florin, N. H., & Harris, A. T. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2007.09.011 · Cited by 482
Dunstan, M. T., Donat, F., Bork, A. H., Grey, C. P., & Müller, C. R. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00100 · Cited by 481
Outlook of carbon capture technology and challenges
Wilberforce, T., Baroutaji, A., Soudan, B., Al-Alami, A. H., & Olabi, A. G. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.11.424 · Cited by 462
Thermal Activation of CaO-Based Sorbent and Self-Reactivation during CO2 Capture Looping Cycles
Manovic, V., & Anthony, E. J. (2008) · Environmental Science & Technology · doi:10.1021/es800152s · Cited by 418
A critical review of high-temperature reversible thermochemical energy storage systems
Sunku Prasad, J., Muthukumar, P., Desai, F., Basu, D. N., & Rahman, M. M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113733 · Cited by 405
Dean, C. C., Blamey, J., Florin, N. H., Al-Jeboori, M. J., & Fennell, P. S. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2010.10.013 · Cited by 375
Hanifa, M., Agarwal, R., Sharma, U., Thapliyal, P. C., & Singh, L. P. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102292 · Cited by 372
Calcium looping sorbents for CO2 capture
Erans, M., Manovic, V., & Anthony, E. J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.074 · Cited by 369
Perejón, A., Romeo, L. M., Lara, Y., Lisbona, P., Martínez, A., & Valverde, J. M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.121 · Cited by 367
CaO‐Based CO2 Sorbents: From Fundamentals to the Development of New, Highly Effective Materials
Kierzkowska, A. M., Pacciani, R., & Müller, C. R. (2013) · ChemSusChem · doi:10.1002/cssc.201300178 · Cited by 351
Chacartegui, R., Alovisio, A., Ortiz, C., Valverde, J. M., Verda, V., & Becerra, J. A. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.04.053 · Cited by 349
Demonstration of steady state CO2 capture in a 1.7MWth calcium looping pilot
Arias, B., Diego, M. E., Abanades, J. C., Lorenzo, M., Diaz, L., Martínez, D., Alvarez, J., & Sánchez-Biezma, A. (2013) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2013.07.014 · Cited by 344
Self-citationShokrollahi Yancheshmeh, M., Radfarnia, H. R., & Iliuta, M. C. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.060 · Cited by 331
Hanak, D. P., Anthony, E. J., & Manovic, V. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01228g · Cited by 330
Performance Enhancement of Calcium Oxide Sorbents for Cyclic CO2 Capture—A Review
Liu, W., An, H., Qin, C., Yin, J., Wang, G., Feng, B., & Xu, M. (2012) · Energy & Fuels · doi:10.1021/ef300220x · Cited by 320
Acharya, B., Dutta, A., & Basu, P. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.11.109 · Cited by 304
Koppatz, S., Pfeifer, C., Rauch, R., Hofbauer, H., Marquard-Moellenstedt, T., & Specht, M. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.03.016 · Cited by 287
Change of CO2Carrying Capacity of CaO in Isothermal Recarbonation−Decomposition Cycles
Lysikov, A. I., Salanov, A. N., & Okunev, A. G. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0702328 · Cited by 278
Calcium Precursors for the Production of CaO Sorbents for Multicycle CO2 Capture
Liu, W., Low, N. W., Feng, B., Wang, G., & Diniz da Costa, J. C. (2010) · Environmental Science & Technology · doi:10.1021/es902426n · Cited by 272
Accelerated carbonation of basic oxygen furnace slag and the effects on its mechanical properties
Ko, M.-S., Chen, Y.-L., & Jiang, J.-H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.051 · Cited by 103
Luo, T., Luo, C., Shi, Z., Li, X., Wu, F., & Zhang, L. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121081 · Cited by 34
Metadata
- Authors
- Grasa, G. S., & Abanades, J. C.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-11-09
- Volume
- 45
- Issue
- 26
- Pages
- 8846-8851
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1999180312
- Cited by
- 757
- References
- 17
- FWCI
- 60.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.