The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Fast Pyrolysis of Oil Mallee Woody Biomass: Effect of Temperature on the Yield and Quality of Pyrolysis Products
Abstract
This paper presents an investigation of the production of crude bio-oil, char, and pyrolytic gases from the fast pyrolysis of mallee woody biomass in Australia. The feedstock was ground, sieved to several narrow particle size ranges, and dried prior to pyrolysis in a novel laboratory-scale fluidized-bed reactor. The effects of pyrolysis temperature (350−600 °C), and biomass particle size (100−600 μm), on the yields and composition of bio-oil, gas, and char are reported. In agreement with previous reports, the pyrolysis temperature has an important impact on the yield and composition of bio-oil, char, and gases. Biomass particle size has a significant effect on the water content of bio-oil. It is interesting to note that the temperature for maximum bio-oil yield, between 450 and 475 °C, resulted in an oil with the highest content of oligomers and, consequently, with the highest viscosity. Such observations suggest that the conventional viewpoint of pyrolyzing biomass at temperatures over 400 °C to maximize bio-oil yield needs to be carefully reevaluated, considering the final use of the produced bio-oil. The increases in oil yield with increasing temperature from 350 to 500 °C were mainly due to the increases in the production of lignin-derived oligomers insoluble in water but soluble in CH 2 Cl 2 . The yield and some fuel properties of the pyrolysis products were compared with those herein obtained for pine as well as those reported in the literature for other lignocellulosic feedstocks but using similar reactors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Overview of Applications of Biomass Fast Pyrolysis Oil
Czernik, S., & Bridgwater, A. V. (2004) · Energy & Fuels · doi:10.1021/ef034067u · Cited by 2,880
An overview of fast pyrolysis of biomass
Bridgwater, A. V., Meier, D., & Radlein, D. (1999) · Organic Geochemistry · doi:10.1016/s0146-6380(99)00120-5 · Cited by 1,752
Fast pyrolysis processes for biomass
Bridgwater, A. (2000) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(99)00007-6 · Cited by 1,751
Fast pyrolysis of biomass : a handbook
Bridgwater, A. V. (1999) · Medical Entomology and Zoology · Cited by 662
Developments in Thermochemical Biomass Conversion: Volume 1 / Volume 2
(1997) · Springer eBooks · doi:10.1007/978-94-009-1559-6 · Cited by 644
Progress in Thermochemical Biomass Conversion
(2001) · Wiley eBooks · doi:10.1002/9780470694954 · Cited by 552
Characterization of bio-oils in chemical families
Garcia-Perez, M., Chaala, A., Pakdel, H., Kretschmer, D., & Roy, C. (2007) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2006.02.006 · Cited by 498
Self-citationProduct Distribution from Pyrolysis of Wood and Agricultural Residues
Di Blasi, C., Signorelli, G., Di Russo, C., & Rea, G. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie980711u · Cited by 441
State of the art of applied fast pyrolysis of lignocellulosic materials — a review
Meier, D., & Faix, O. (1999) · Bioresource Technology · doi:10.1016/s0960-8524(98)00086-8 · Cited by 417
On the mechanism of the rapid pyrolysis of cellulose
Piskorz, J., Radlein, D., & Scott, D. S. (1986) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(86)85003-3 · Cited by 361
Cited by
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
Characterization and prediction of biomass pyrolysis products
Neves, D., Thunman, H., Matos, A., Tarelho, L., & Gómez-Barea, A. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.01.001 · Cited by 856
Kim, K. H., Kim, J.-Y., Cho, T.-S., & Choi, J. W. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.04.094 · Cited by 696
A review on operating parameters for optimum liquid oil yield in biomass pyrolysis
Akhtar, J., & Saidina Amin, N. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.033 · Cited by 692
Hu, X., & Gholizadeh, M. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.01.024 · Cited by 671
Operating parameters for bio-oil production in biomass pyrolysis: A review
Guedes, R. E., Luna, A. S., & Torres, A. R. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.11.019 · Cited by 619
Fates of Chemical Elements in Biomass during Its Pyrolysis
Liu, W.-J., Li, W.-W., Jiang, H., & Yu, H.-Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00647 · Cited by 614
A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading
Butler, E., Devlin, G., Meier, D., & McDonnell, K. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.035 · Cited by 471
El-Naggar, A., El-Naggar, A. H., Shaheen, S. M., Sarkar, B., Chang, S. X., Tsang, D. C. W., Rinklebe, J., & Ok, Y. S. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.02.044 · Cited by 437
Challenges and Opportunities for Bio-oil Refining: A Review
Pinheiro Pires, A. P., Arauzo, J., Fonts, I., Domine, M. E., Fernández Arroyo, A., Garcia-Perez, M. E., Montoya, J., Chejne, F., Pfromm, P., & Garcia-Perez, M. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00039 · Cited by 385
Self-citationEffects of particle size on the fast pyrolysis of oil mallee woody biomass
Shen, J., Wang, X.-S., Garcia-Perez, M., Mourant, D., Rhodes, M. J., & Li, C.-Z. (2009) · Fuel · doi:10.1016/j.fuel.2009.05.001 · Cited by 376
Self-citationInfluence of temperature on biomass pyrolysis in a conical spouted bed reactor
Amutio, M., Lopez, G., Artetxe, M., Elordi, G., Olazar, M., & Bilbao, J. (2012) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.04.002 · Cited by 345
Historical Developments of Pyrolysis Reactors: A Review
Garcia-Nunez, J. A., Pelaez-Samaniego, M. R., Garcia-Perez, M. E., Fonts, I., Abrego, J., Westerhof, R. J. M., & Garcia-Perez, M. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00641 · Cited by 331
Self-citationBiochar’s role as an alternative N-fertilizer: Ammonia capture
Spokas, K. A., Novak, J. M., & Venterea, R. T. (2012) · Plant and Soil · doi:10.1007/s11104-011-0930-8 · Cited by 326
Current technologies for analysis of biomass thermochemical processing: A review
Bahng, M.-K., Mukarakate, C., Robichaud, D. J., & Nimlos, M. R. (2009) · Analytica Chimica Acta · doi:10.1016/j.aca.2009.08.016 · Cited by 319
Mourant, D., Wang, Z., He, M., Wang, X. S., Garcia-Perez, M., Ling, K., & Li, C.-Z. (2011) · Fuel · doi:10.1016/j.fuel.2011.04.033 · Cited by 314
Self-citationDabros, T. M. H., Stummann, M. Z., Høj, M., Jensen, P. A., Grunwaldt, J.-D., Gabrielsen, J., Mortensen, P. M., & Jensen, A. D. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.05.002 · Cited by 309
State-of-the-art of fast pyrolysis in IEA bioenergy member countries
Meier, D., van de Beld, B., Bridgwater, A. V., Elliott, D. C., Oasmaa, A., & Preto, F. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.061 · Cited by 295
Hydrotreatment of pyrolysis bio-oil: A review
Han, Y., Gholizadeh, M., Tran, C.-C., Kaliaguine, S., Li, C.-Z., Olarte, M., & Garcia-Perez, M. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106140 · Cited by 292
Self-citationA critical review on production, modification and utilization of biochar
Xie, Y., Wang, L., Li, H., Westholm, L. J., Carvalho, L., Thorin, E., Yu, Z., Yu, X., & Skreiberg, Ø. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105405 · Cited by 290
Pyrolysis liquids and gases as alternative fuels in internal combustion engines – A review
Hossain, A. K., & Davies, P. A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.12.031 · Cited by 280
Utilization of oil palm tree residues to produce bio-oil and bio-char via pyrolysis
Abnisa, F., Arami-Niya, A., Wan Daud, W. M. A., Sahu, J. N., & Noor, I. M. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.08.038 · Cited by 258
Garcia-Perez, M., Wang, S., Shen, J., Rhodes, M., Lee, W. J., & Li, C.-Z. (2008) · Energy & Fuels · doi:10.1021/ef7007634 · Cited by 235
Self-citationAnsari, K. B., Arora, J. S., Chew, J. W., Dauenhauer, P. J., & Mushrif, S. H. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b00920 · Cited by 198
Evolution of Aromatic Structures during the Low-Temperature Electrochemical Upgrading of Bio-oil
Deng, W., Xu, K., Xiong, Z., Chaiwat, W., Wang, X., Su, S., Hu, S., Qiu, J., Wang, Y., & Xiang, J. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b03099 · Cited by 180
Self-citationFormation of Aromatic Structures during the Pyrolysis of Bio-oil
Wang, Y., Li, X., Mourant, D., Gunawan, R., Zhang, S., & Li, C.-Z. (2012) · Energy & Fuels · doi:10.1021/ef201155e · Cited by 155
Self-citationXiong, Z., Guo, J., Chaiwat, W., Deng, W., Hu, X., Han, H., Chen, Y., Xu, K., Su, S., Hu, S., et al. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106299 · Cited by 132
Kim, K. H., Eom, I. Y., Lee, S. M., Choi, D., Yeo, H., Choi, I.-G., & Choi, J. W. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.04.002 · Cited by 113
Progress in application of the pyrolytic lignin from pyrolysis of biomass
Zhang, L., Zhang, S., Hu, X., & Gholizadeh, M. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129560 · Cited by 77
Lu, H. R., & El Hanandeh, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.025 · Cited by 68
Jeswani, H. K., Falano, T., & Azapagic, A. (2015) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1558 · Cited by 51
Impact of Biochar on Fusarium Wilt of Cotton and the Dynamics of Soil Microbial Community
Asif, M., Haider, M. S., & Akhter, A. (2023) · Sustainability · doi:10.3390/su151712936 · Cited by 25
Miranda, R., Sosa, C., Bustos, D., Carrillo, E., & Rodrguez-Cant, M. (2012) · Lignocellulosic Precursors Used in the Synthesis of Activated Carbon - Characterization Techniques and Applications in the Wastewater Treatment · doi:10.5772/39368 · Cited by 12
“Biomass can be converted to biochar and bio-oil (carbon rich solid residue and light gases), which can be used to supply the energy requirement of pyrolysis process operations (Bridgwater, 2004; Garcia-Perez et al., 2008a; 2008b).”
Background
Metadata
- Authors
- Garcia-Perez, M., Wang, X. S., Shen, J., Rhodes, M. J., Tian, F., Lee, W.-J., Wu, H., & Li, C.-Z.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-02-16
- Volume
- 47
- Issue
- 6
- Pages
- 1846-1854
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2033097910
- Cited by
- 391
- References
- 37
- FWCI
- 11.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.