Continuous Polyolefin Cracking on an HZSM-5 Zeolite Catalyst in a Conical Spouted Bed Reactor
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The effect of operating conditions on product yields and compositions has been studied in the catalytic cracking of polyolefins (high- and low-density polyethylene and polypropylene) in a conical spouted bed reactor. The catalyst has been prepared by agglomerating an HZSM-5 zeolite (SiO 2 /Al 2 O 3 = 30) with bentonite and alumina. The study has been carried out in continuous mode, in the 450–570 °C range, with polyolefin flow rates between 1 and 2 g min –1 and feeding up to 1 kg of polyolefin into a 30 g catalyst bed. The result is an excellent performance of the reactor–catalyst pairing for continuous catalytic pyrolysis, given that the yields obtained in the pyrolysis of high-density polyethylene at 500 °C without defluidization problems and very low catalyst deactivation are as follows: 60 wt % C 2 –C 4 olefins, 15 wt % nonaromatic C 5 –C 11 hydrocarbons, 10 wt % single-ring aromatics, and 14 wt % C 4- alkanes. Only small differences are observed in the pyrolysis of the different polyolefins.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cerqueira, H. S., Caeiro, G., Costa, L., & Ramôa Ribeiro, F. (2008) · Journal of Molecular Catalysis A: Chemical · doi:10.1016/j.molcata.2008.06.014 · Cited by 425
Cited by
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Self-citationRecent advances in the gasification of waste plastics. A critical overview
Lopez, G., Artetxe, M., Amutio, M., Alvarez, J., Bilbao, J., & Olazar, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.032 · Cited by 852
Self-citationDogu, O., Pelucchi, M., Van de Vijver, R., Van Steenberge, P. H. M., D'hooge, D. R., Cuoci, A., Mehl, M., Frassoldati, A., Faravelli, T., & Van Geem, K. M. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100901 · Cited by 698
Ochoa, A., Bilbao, J., Gayubo, A. G., & Castaño, P. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109600 · Cited by 547
Self-citationCatalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Sadrameli, S. M. (2015) · Fuel · doi:10.1016/j.fuel.2014.09.034 · Cited by 381
Jet fuel production from waste plastics via catalytic pyrolysis with activated carbons
Zhang, Y., Duan, D., Lei, H., Villota, E., & Ruan, R. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113337 · Cited by 321
Zhang, X., Lei, H., Yadavalli, G., Zhu, L., Wei, Y., & Liu, Y. (2015) · Fuel · doi:10.1016/j.fuel.2014.12.013 · Cited by 285
Waste tyre valorization by catalytic pyrolysis – A review
Arabiourrutia, M., Lopez, G., Artetxe, M., Alvarez, J., Bilbao, J., & Olazar, M. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109932 · Cited by 284
Self-citationEfficiency and proportions of waste tyre pyrolysis products depending on the reactor type—A review
Lewandowski, W. M., Januszewicz, K., & Kosakowski, W. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.03.018 · Cited by 282
A review on gasification and pyrolysis of waste plastics
Shah, H. H., Amin, M., Iqbal, A., Nadeem, I., Kalin, M., Soomar, A. M., & Galal, A. M. (2023) · Frontiers in Chemistry · doi:10.3389/fchem.2022.960894 · Cited by 269
Harussani, M. M., Sapuan, S. M., Rashid, U., Khalina, A., & Ilyas, R. A. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.149911 · Cited by 255
Light olefins from HDPE cracking in a two-step thermal and catalytic process
Artetxe, M., Lopez, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.105 · Cited by 191
“In situ pyrolysis of HDPE on HZSM-5 catalysts in a CSBR reactor has also been studied [27,28].”
BackgroundResultSelf-citationErkiaga, A., Lopez, G., Amutio, M., Bilbao, J., & Olazar, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.10.018 · Cited by 182
Self-citation
Metadata
- Authors
- Elordi, G., Olazar, M., Lopez, G., Artetxe, M., & Bilbao, J.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-04-15
- Volume
- 50
- Issue
- 10
- Pages
- 6061-6070
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2330758768
- Cited by
- 116
- References
- 1
- FWCI
- 4.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.