Production of Light Olefins from Polyethylene in a Two-Step Process: Pyrolysis in a Conical Spouted Bed and Downstream High-Temperature Thermal Cracking
The DOI matches its Crossref record.
Abstract
A two-step process has been used for the selective production of light olefins by the thermal cracking of high-density polyethylene. The plastic has been continuously fed into a conical spouted-bed reactor (CSBR) operating at 500 °C, which yields 93 wt % of waxes (C 21+ ) and C 12 –C 21 hydrocarbons. The volatile product stream has been cracked downstream in a multitubular (quartz tubes) reactor in the 800–950 °C range, with short residence times (0.016–0.032 s). A yield of 77 wt % of light olefins (C 2 –C 4 ) has been obtained by operating at 900 °C in the second step. The maximum yields of ethylene, propylene, and butenes are 40.4, 19.5, and 17.5 wt %, respectively. Given the short residence time of the products in the reactor, the yield of aromatics is only 6.2 wt %. The high light olefin yield is due to the excellent performance of both steps. The CSBR allows maximizing the yield of waxes and avoiding defluidization problems. The operating conditions in the multitubular reactor (low concentration of the compounds in the volatile stream and short volatile residence times) are suitable for minimizing secondary reactions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Self-citationRecent advances in the gasification of waste plastics. A critical overview
Lopez, G., Artetxe, M., Amutio, M., Alvarez, J., Bilbao, J., & Olazar, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.032 · Cited by 852
Self-citationDogu, O., Pelucchi, M., Van de Vijver, R., Van Steenberge, P. H. M., D'hooge, D. R., Cuoci, A., Mehl, M., Frassoldati, A., Faravelli, T., & Van Geem, K. M. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100901 · Cited by 698
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Sadrameli, S. M. (2015) · Fuel · doi:10.1016/j.fuel.2014.09.034 · Cited by 381
Upcycling waste plastics into carbon nanomaterials: A review
Zhuo, C., & Levendis, Y. A. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.39931 · Cited by 327
Pyrolysis of plastic species: A review of resources and products
Maqsood, T., Dai, J., Zhang, Y., Guang, M., & Li, B. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105295 · Cited by 315
Ma, C., Yu, J., Wang, B., Song, Z., Xiang, J., Hu, S., Su, S., & Sun, L. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.020 · Cited by 287
Zhang, X., Lei, H., Yadavalli, G., Zhu, L., Wei, Y., & Liu, Y. (2015) · Fuel · doi:10.1016/j.fuel.2014.12.013 · Cited by 285
A review on gasification and pyrolysis of waste plastics
Shah, H. H., Amin, M., Iqbal, A., Nadeem, I., Kalin, M., Soomar, A. M., & Galal, A. M. (2023) · Frontiers in Chemistry · doi:10.3389/fchem.2022.960894 · Cited by 269
Engamba Esso, S. B., Xiong, Z., Chaiwat, W., Kamara, M. F., Longfei, X., Xu, J., Ebako, J., Jiang, L., Su, S., Hu, S., et al. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106415 · Cited by 254
Fast co-pyrolysis of sewage sludge and lignocellulosic biomass in a conical spouted bed reactor
Alvarez, J., Amutio, M., Lopez, G., Bilbao, J., & Olazar, M. (2015) · Fuel · doi:10.1016/j.fuel.2015.07.039 · Cited by 242
Self-citationYadav, G., Singh, A., Dutta, A., Uekert, T., DesVeaux, J. S., Nicholson, S. R., Tan, E. C. D., Mukarakate, C., Schaidle, J. A., Wrasman, C. J., et al. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00749a · Cited by 223
Abbas-Abadi, M. S., Ureel, Y., Eschenbacher, A., Vermeire, F. H., Varghese, R. J., Oenema, J., Stefanidis, G. D., & Van Geem, K. M. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101046 · Cited by 221
Sewage sludge valorization by flash pyrolysis in a conical spouted bed reactor
Alvarez, J., Amutio, M., Lopez, G., Barbarias, I., Bilbao, J., & Olazar, M. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.03.047 · Cited by 204
Self-citationFan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P., Liu, Y., Wang, Y., Peng, P., Cheng, Y., Addy, M., et al. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.039 · Cited by 195
Light olefins from HDPE cracking in a two-step thermal and catalytic process
Artetxe, M., Lopez, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.105 · Cited by 191
Self-citationZhang, X., Lei, H., Zhu, L., Qian, M., Zhu, X., Wu, J., & Chen, S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.04.071 · Cited by 178
An overview of a novel concept in biomass pyrolysis: microwave irradiation
Zhang, X., Rajagopalan, K., Lei, H., Ruan, R., & Sharma, B. K. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00254h · Cited by 170
Zhang, H., Xiao, R., Nie, J., Jin, B., Shao, S., & Xiao, G. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.05.040 · Cited by 158
Zabaniotou, A., & Vaskalis, I. (2023) · Energies · doi:10.3390/en16020593 · Cited by 29
Metadata
- Authors
- Artetxe, M., Lopez, G., Elordi, G., Amutio, M., Bilbao, J., & Olazar, M.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-10-19
- Volume
- 51
- Issue
- 43
- Pages
- 13915-13923
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2333270464
- Cited by
- 154
- References
- 0
- FWCI
- 4.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.