The DOI matches its Crossref record.
Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity
Abstract
High density polyethylene (HDPE) cracking has been carried out in a thermal-catalytic two-step unit for the selective production of light olefins. Continuous pyrolysis of HDPE has been conducted in a conical spouted bed reactor at 500 °C, and the volatiles formed (mainly waxes) have been transformed in a downstream fixed bed catalytic reactor at 500 °C. The effect of catalyst acidity on product yield and composition has been studied by using three catalysts based on HZSM-5 zeolites with a SiO 2 /Al 2 O 3 ratio of 30, 80, and 280. The maximum light olefin yield (58 wt %) has been obtained using the most acidic catalyst (SiO 2 /Al 2 O 3 ratio of 30), with the individual yields of ethylene, propylene, and butenes being 9.5, 32, and 16.5 wt %, respectively. The results are a clear evidence of the higher efficiency of the two-step reaction system compared to the in situ catalytic pyrolysis (single-step), which is explained by the suitable combination of operating conditions in each one of the steps.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Catalytic pyrolysis of plastic waste: A review
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., & Nizami, A. S. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 964
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Self-citationRecent advances in the gasification of waste plastics. A critical overview
Lopez, G., Artetxe, M., Amutio, M., Alvarez, J., Bilbao, J., & Olazar, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.032 · Cited by 852
Self-citationCurrent state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
A review on catalytic pyrolysis of plastic wastes to high-value products
Peng, Y., Wang, Y., Ke, L., Dai, L., Wu, Q., Cobb, K., Zeng, Y., Zou, R., Liu, Y., & Ruan, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115243 · Cited by 538
Current technologies for plastic waste treatment: A review
Zhang, F., Zhao, Y., Wang, D., Yan, M., Zhang, J., Zhang, P., Ding, T., Chen, L., & Chen, C. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124523 · Cited by 532
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Catalytic methods for chemical recycling or upcycling of commercial polymers
Kosloski-Oh, S. C., Wood, Z. A., Manjarrez, Y., de los Rios, J. P., & Fieser, M. E. (2021) · Materials Horizons · doi:10.1039/d0mh01286f · Cited by 369
Pyrolysis of Polystyrene Waste: A Review
Maafa, I. (2021) · Polymers · doi:10.3390/polym13020225 · Cited by 311
Pyrolysis of plastic species: A review of resources and products
Maqsood, T., Dai, J., Zhang, Y., Guang, M., & Li, B. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105295 · Cited by 315
Huang, J., Veksha, A., Chan, W. P., Giannis, A., & Lisak, G. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111866 · Cited by 301
Zhang, X., Lei, H., Yadavalli, G., Zhu, L., Wei, Y., & Liu, Y. (2015) · Fuel · doi:10.1016/j.fuel.2014.12.013 · Cited by 285
A review on gasification and pyrolysis of waste plastics
Shah, H. H., Amin, M., Iqbal, A., Nadeem, I., Kalin, M., Soomar, A. M., & Galal, A. M. (2023) · Frontiers in Chemistry · doi:10.3389/fchem.2022.960894 · Cited by 269
Effect of catalyst contact mode and gas atmosphere during catalytic pyrolysis of waste plastics
Xue, Y., Johnston, P., & Bai, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.03.071 · Cited by 262
Engamba Esso, S. B., Xiong, Z., Chaiwat, W., Kamara, M. F., Longfei, X., Xu, J., Ebako, J., Jiang, L., Su, S., Hu, S., et al. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106415 · Cited by 254
Zhang, H., Xiao, R., Nie, J., Jin, B., Shao, S., & Xiao, G. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.05.040 · Cited by 158
Non-biodegradable polymeric waste pyrolysis for energy recovery
Dwivedi, P., Mishra, P. K., Mondal, M. K., & Srivastava, N. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02198 · Cited by 146
Pyrolysis for plastic waste management: An engineering perspective
Xayachak, T., Haque, N., Parthasarathy, R., King, S., Emami, N., Lau, D., & Pramanik, B. K. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108865 · Cited by 127
Metadata
- Authors
- Artetxe, M., Lopez, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-07-23
- Volume
- 52
- Issue
- 31
- Pages
- 10637-10645
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2325387027
- Cited by
- 250
- References
- 0
- FWCI
- 2.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.