CoChat

A Novel Method for CO2 Sequestration via Indirect Carbonation of Coal Fly Ash

He, Lanlan, Yu, Dunxi, Lv, Weizhi, Wu, Jianqun, Xu, Minghou · 2013 · Industrial & Engineering Chemistry Research
Cited by 122

The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.

Abstract

Coal fly ash is a potential candidate for CO 2 mineral sequestration. If calcium is extracted selectively from coal fly ash prior to carbonation (namely indirect carbonation), a high-purity and marketable precipitated calcium carbonate (PCC) can be obtained. In the extraction process, recyclable ammonium salt (i.e., NH 4 Cl/NH 4 NO 3 /CH 3 COONH 4 ) solution was used as a calcium extraction agent in this study. The influence of time, temperature, agent concentration, and solid-to-liquid ratio on calcium extraction efficiency was explored. NH 4 Cl/NH 4 NO 3 /CH 3 COONH 4 are confirmed to be effective calcium extraction agents for the high-calcium coal fly ash investigated, and about 35–40% of the calcium is extracted into the solution within an hour. The calcium extraction performance is best for CH 4 COONH 4, followed by NH 4 NO 3 and NH 4 Cl. Increasing temperature from 25 to 90 °C and agent concentration from 0.5 to 3 mol/L only subtly increases calcium extraction efficiency for NH 4 Cl and NH 4 NO 3, while the positive effect of increasing temperature and agent concentration is more obvious for CH 3 COONH 4 . In the carbonation process, carbonation efficiency, namely conversion of Ca 2+ into precipitated calcium carbonate(PCC), is only 41–47% when the leachate is carbonated by CO 2 . A newly proposed method of substituting CO 2 with NH 4 HCO 3 as the source of CO 3 2– yields much higher carbonation efficiency (90–93%). Furthermore, the carbonation reaction rate is also largely improved when carbonating the leachate by NH 4 HCO 3 . In addition to these benefits, CO 2 capture and storage can be simultaneously realized on-site if integrating the leachate carbonation process with an ammonia–water CO 2 capture process using NH 4 HCO 3 as a connector. In this way, the costs associated with CO 2 compression and transportation can be eliminated. PCC with a purity up to 97–98% is obtained, which meets the purity requirement (≥97%) of industrially used PCC. It is estimated based on the experimental results that 0.17 tons of PCC can be produced from 1 ton of coal fly ash by this method, bounding 0.075 tons of CO 2 at the same time, and 0.036 tons more CO 2 can be avoided if the obtained PCC is substituted for the PCC manufactured by the conventional energy-intensive method.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ie4023644

Cites

15 of 15 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 15 references

Cited by

Metadata

Authors
He, L., Yu, D., Lv, W., Wu, J., & Xu, M.
Venue
Industrial & Engineering Chemistry Research
Published
2013-10-16
Volume
52
Issue
43
Pages
15138-15145
ISSN
  • 0888-5885 (ISSN-L)
  • 1520-5045
OpenAlex
W2330710432
Cited by
122
References
15
FWCI
3.54
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.