The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Pure and Pseudo-pure Fluid Thermophysical Property Evaluation and the Open-Source Thermophysical Property Library CoolProp
Open accessAbstract
Over the last few decades, researchers have developed a number of empirical and theoretical models for the correlation and prediction of the thermophysical properties of pure fluids and mixtures treated as pseudo-pure fluids. In this paper, a survey of all the state-of-the-art formulations of thermophysical properties is presented. The most-accurate thermodynamic properties are obtained from multiparameter Helmholtz-energy-explicit-type formulations. For the transport properties, a wider range of methods has been employed, including the extended corresponding states method. All of the thermophysical property correlations described here have been implemented into CoolProp, an open-source thermophysical property library. This library is written in C++, with wrappers available for the majority of programming languages and platforms of technical interest. As of publication, 110 pure and pseudo-pure fluids are included in the library, as well as properties of 40 incompressible fluids and humid air. The source code for the CoolProp library is included as an electronic annex.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kunz, O., & Wagner, W. (2012) · Journal of Chemical & Engineering Data · doi:10.1021/je300655b · Cited by 1,341
Cited by
Technical potential of salt caverns for hydrogen storage in Europe
Caglayan, D. G., Weber, N., Heinrichs, H. U., Linßen, J., Robinius, M., Kukla, P. A., & Stolten, D. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.12.161 · Cited by 733
Seasonal storage and alternative carriers: A flexible hydrogen supply chain model
Reuß, M., Grube, T., Robinius, M., Preuster, P., Wasserscheid, P., & Stolten, D. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.050 · Cited by 722
The NIST REFPROP Database for Highly Accurate Properties of Industrially Important Fluids
Huber, M. L., Lemmon, E. W., Bell, I. H., & McLinden, M. O. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c01427 · Cited by 398
Self-citationRate capability and Ragone plots for phase change thermal energy storage
Woods, J., Mahvi, A., Goyal, A., Kozubal, E., Odukomaiya, A., & Jackson, R. (2021) · Nature Energy · doi:10.1038/s41560-021-00778-w · Cited by 253
Escamilla, A., Sánchez, D., & García-Rodríguez, L. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.03.238 · Cited by 143
Metadata
- Authors
- Bell, I. H., Wronski, J., Quoilin, S., & Lemort, V.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-27
- Volume
- 53
- Issue
- 6
- Pages
- 2498-2508
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2135536698
- Cited by
- 2,826
- References
- 1
- FWCI
- 41.22
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pure and Pseudo-pure Fluid Thermophysical Property Evaluation and the Open-Source Thermophysical Property Library CoolProp. https://app.cochat.ai/papers/10.1021/ie4033999
- The paper
- Bell, I. H., Wronski, J., Quoilin, S., & Lemort, V. (2014). Pure and Pseudo-pure Fluid Thermophysical Property Evaluation and the Open-Source Thermophysical Property Library CoolProp. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie4033999
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
