Conversion of Polyethylene into Gasoline-Range Fuels by Two-Stage Catalytic Degradation Using Silica−Alumina and HZSM-5 Zeolite
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A two-stage catalytic degradation of polyethylene using amorphous silica−alumina and HZSM-5 zeolite catalysts in series has been developed for converting the polymer into high-quality gasoline-range fuels. Compared with the one-stage degradation over each catalyst, the two-stage method provides some advantages. They are an improved gasoline yield and a high octane number despite low aromatics content. Significant results were obtained when silica−alumina and HZSM-5 were used in a weight ratio of 9:1 as upper and lower catalysts, respectively, in a flow reactor. The reverse sequence of catalysts showed no advantage. It was suggested that large pores and moderate acidity of the silica−alumina loaded in the upper layer operated favorably to catalyze the degradation of polyethylene into liquid hydrocarbons. The resulting oils showed low quality, and they were transformed into high-quality gasoline on the strongly acidic sites of the HZSM-5 loaded in the lower layer at the expense of oil yield. Increases in concentration of isoparaffins and aromatics contributed to the upgrading.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Garforth, A., Fiddy, S., Lin, Y.-H., Ghanbari-Siakhali, A., Sharratt, P. N., & Dwyer, J. (1997) · Thermochimica Acta · doi:10.1016/s0040-6031(96)03145-0 · Cited by 79
Self-citation
Cited by
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Kunwar, B., Cheng, H. N., Chandrashekaran, S. R., & Sharma, B. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.015 · Cited by 639
Serrano, D. P., Aguado, J., & Escola, J. M. (2012) · ACS Catalysis · doi:10.1021/cs3003403 · Cited by 457
Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries
Miandad, R., Rehan, M., Barakat, M. A., Aburiazaiza, A. S., Khan, H., Ismail, I. M. I., Dhavamani, J., Gardy, J., Hassanpour, A., & Nizami, A.-S. (2019) · Frontiers in Energy Research · doi:10.3389/fenrg.2019.00027 · Cited by 454
Fuels from Waste Plastics by Thermal and Catalytic Processes: A Review
Aguado, J., Serrano, D. P., & Escola, J. M. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800393w · Cited by 311
Mangesh, V. L., Padmanabhan, S., Tamizhdurai, P., & Ramesh, A. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119066 · Cited by 281
Arabiourrutia, M., Elordi, G., Lopez, G., Borsella, E., Bilbao, J., & Olazar, M. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.012 · Cited by 275
Wu, C., & Williams, P. T. (2010) · Fuel · doi:10.1016/j.fuel.2010.05.032 · Cited by 271
Effect of catalyst contact mode and gas atmosphere during catalytic pyrolysis of waste plastics
Xue, Y., Johnston, P., & Bai, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.03.071 · Cited by 262
Abbas-Abadi, M. S., Ureel, Y., Eschenbacher, A., Vermeire, F. H., Varghese, R. J., Oenema, J., Stefanidis, G. D., & Van Geem, K. M. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101046 · Cited by 221
Sriningsih, W., Saerodji, M. G., Trisunaryanti, W., Triyono, Armunanto, R., & Falah, I. I. (2014) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2014.03.028 · Cited by 197
“These catalysts were selected because of their excellent activities and stabilities [4].”
BackgroundMethodInfluentialFan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P., Liu, Y., Wang, Y., Peng, P., Cheng, Y., Addy, M., et al. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.039 · Cited by 195
Non-biodegradable polymeric waste pyrolysis for energy recovery
Dwivedi, P., Mishra, P. K., Mondal, M. K., & Srivastava, N. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02198 · Cited by 146
Transforming Plastic Waste into Porous Carbon for Capturing Carbon Dioxide: A Review
Hussin, F., Aroua, M. K., Kassim, M. A., & Md. Ali, U. F. (2021) · Energies · doi:10.3390/en14248421 · Cited by 84
Metadata
- Authors
- Uemichi, Y., Nakamura, J., Itoh, T., Sugioka, M., Garforth, A. A., & Dwyer, J.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-12-17
- Volume
- 38
- Issue
- 2
- Pages
- 385-390
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2054442899
- Cited by
- 107
- References
- 1
- FWCI
- 2.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.