The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Molecular Packing of High-Mobility Diketo Pyrrolo-Pyrrole Polymer Semiconductors with Branched Alkyl Side Chains
Abstract
We describe a series of highly soluble diketo pyrrolo-pyrrole (DPP)-bithiophene copolymers exhibiting field effect hole mobilities up to 0.74 cm(2) V(-1) s(-1), with a common synthetic motif of bulky 2-octyldodecyl side groups on the conjugated backbone. Spectroscopy, diffraction, and microscopy measurements reveal a transition in molecular packing behavior from a preferentially edge-on orientation of the conjugated plane to a preferentially face-on orientation as the attachment density of the side chains increases. Thermal annealing generally reduces both the face-on population and the misoriented edge-on domains. The highest hole mobilities of this series were obtained from edge-on molecular packing and in-plane liquid-crystalline texture, but films with a bimodal orientation distribution and no discernible in-plane texture exhibited surprisingly comparable mobilities. The high hole mobility may therefore arise from the molecular packing feature common to the entire polymer series: backbones that are strictly oriented parallel to the substrate plane and coplanar with other backbones in the same layer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-dimensional charge transport in self-organized, high-mobility conjugated polymers
Sirringhaus, H., Brown, P. J., Friend, R. H., Nielsen, M. M., Bechgaard, K., Langeveld-Voss, B. M. W., Spiering, A. J. H., Janssen, R. A. J., Meijer, E. W., Herwig, P., et al. (1999) · Nature · doi:10.1038/44359 · Cited by 4,624
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
A high-mobility electron-transporting polymer for printed transistors
Yan, H., Chen, Z., Zheng, Y., Newman, C., Quinn, J. R., Dötz, F., Kastler, M., & Facchetti, A. (2009) · Nature · doi:10.1038/nature07727 · Cited by 3,009
Stöhr, J. (1992) · Springer Series in Surface Sciences · doi:10.1007/978-3-662-02853-7 · Cited by 2,307
Liquid-crystalline semiconducting polymers with high charge-carrier mobility
McCulloch, I., Heeney, M., Bailey, C., Genevicius, K., MacDonald, I., Shkunov, M., Sparrowe, D., Tierney, S., Wagner, R., Zhang, W., et al. (2006) · Nature Materials · doi:10.1038/nmat1612 · Cited by 2,151
Self-citationTransmission Electron Microscopy
Williams, D. B., & Carter, C. B. (1996) · Springer eBooks · doi:10.1007/978-1-4757-2519-3 · Cited by 1,817
Materials and Applications for Large Area Electronics: Solution-Based Approaches
Arias, A. C., MacKenzie, J. D., McCulloch, I., Rivnay, J., & Salleo, A. (2010) · Chemical Reviews · doi:10.1021/cr900150b · Cited by 1,733
Self-citationChen, T., Wu, X., & Rieke, R. D. (1995) · Journal of the American Chemical Society · doi:10.1021/ja00106a027 · Cited by 1,551
Kline, R. J., McGehee, M. D., Kadnikova, E. N., Liu, J., Fréchet, J. M. J., & Toney, M. F. (2005) · Macromolecules · doi:10.1021/ma047415f · Cited by 1,072
Self-citationHigh-Performance Semiconducting Polythiophenes for Organic Thin-Film Transistors
Ong, B. S., Wu, Y., Liu, P., & Gardner, S. (2004) · Journal of the American Chemical Society · doi:10.1021/ja039772w · Cited by 1,041
McCullough, R. D., Lowe, R. D., Jayaraman, M., & Anderson, D. L. (1993) · The Journal of Organic Chemistry · doi:10.1021/jo00056a024 · Cited by 905
Bronstein, H., Chen, Z., Ashraf, R. S., Zhang, W., Du, J., Durrant, J. R., Shakya Tuladhar, P., Song, K., Watkins, S. E., Geerts, Y., et al. (2011) · Journal of the American Chemical Society · doi:10.1021/ja110619k · Cited by 904
Self-citationInkjet printing as a deposition and patterning tool for polymers and inorganic particles
Tekin, E., Smith, P. J., & Schubert, U. S. (2008) · Soft Matter · doi:10.1039/b711984d · Cited by 807
Poly(diketopyrrolopyrrole−terthiophene) for Ambipolar Logic and Photovoltaics
Bijleveld, J. C., Zoombelt, A. P., Mathijssen, S. G. J., Wienk, M. M., Turbiez, M., de Leeuw, D. M., & Janssen, R. A. J. (2009) · Journal of the American Chemical Society · doi:10.1021/ja907506r · Cited by 748
Ultrahigh Mobility in Polymer Field-Effect Transistors by Design
Tsao, H. N., Cho, D. M., Park, I., Hansen, M. R., Mavrinskiy, A., Yoon, D. Y., Graf, R., Pisula, W., Spiess, H. W., & Müllen, K. (2011) · Journal of the American Chemical Society · doi:10.1021/ja108861q · Cited by 705
X-ray structural studies of poly(3-alkylthiophenes): an example of an inverse comb
Prosa, T. J., Winokur, M. J., Moulton, J., Smith, P., & Heeger, A. J. (1992) · Macromolecules · doi:10.1021/ma00043a019 · Cited by 695
Indacenodithiophene Semiconducting Polymers for High-Performance, Air-Stable Transistors
Zhang, W., Smith, J., Watkins, S. E., Gysel, R., McGehee, M., Salleo, A., Kirkpatrick, J., Ashraf, S., Anthopoulos, T., Heeney, M., et al. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1049324 · Cited by 603
Self-citationA High Mobility P‐Type DPP‐Thieno[3,2‐b]thiophene Copolymer for Organic Thin‐Film Transistors
Li, Y., Singh, S. P., & Sonar, P. (2010) · Advanced Materials · doi:10.1002/adma.201002313 · Cited by 546
Field-Effect Transistors Based on a Benzothiadiazole−Cyclopentadithiophene Copolymer
Zhang, M., Tsao, H. N., Pisula, W., Yang, C., Mishra, A. K., & Müllen, K. (2007) · Journal of the American Chemical Society · doi:10.1021/ja0683537 · Cited by 493
High‐Mobility Ambipolar Near‐Infrared Light‐Emitting Polymer Field‐Effect Transistors
Bürgi, L., Turbiez, M., Pfeiffer, R., Bienewald, F., Kirner, H., & Winnewisser, C. (2008) · Advanced Materials · doi:10.1002/adma.200702775 · Cited by 433
Sonar, P., Singh, S. P., Li, Y., Soh, M. S., & Dodabalapur, A. (2010) · Advanced Materials · doi:10.1002/adma.201002973 · Cited by 428
The Influence of Morphology on High‐Performance Polymer Field‐Effect Transistors
Tsao, H. N., Cho, D., Andreasen, J. W., Rouhanipour, A., Breiby, D. W., Pisula, W., & Müllen, K. (2009) · Advanced Materials · doi:10.1002/adma.200802032 · Cited by 424
Liquid Crystalline Ordering and Charge Transport in Semiconducting Materials
Pisula, W., Zorn, M., Chang, J. Y., Müllen, K., & Zentel, R. (2009) · Macromolecular Rapid Communications · doi:10.1002/marc.200900251 · Cited by 400
Critical Role of Side-Chain Attachment Density on the Order and Device Performance of Polythiophenes
Kline, R. J., DeLongchamp, D. M., Fischer, D. A., Lin, E. K., Richter, L. J., Chabinyc, M. L., Toney, M. F., Heeney, M., & McCulloch, I. A. (2007) · Macromolecules · doi:10.1021/ma0709001 · Cited by 356
Self-citationOsaka, I., Zhang, R., Sauvé, G., Smilgies, D.-M., Kowalewski, T., & McCullough, R. D. (2009) · Journal of the American Chemical Society · doi:10.1021/ja801475h · Cited by 278
Phthalimide-Based Polymers for High Performance Organic Thin-Film Transistors
Guo, X., Kim, F. S., Jenekhe, S. A., & Watson, M. D. (2009) · Journal of the American Chemical Society · doi:10.1021/ja810050y · Cited by 263
Liu, J., Zhang, R., Sauvé, G., Kowalewski, T., & McCullough, R. D. (2008) · Journal of the American Chemical Society · doi:10.1021/ja803077v · Cited by 246
Variations in Semiconducting Polymer Microstructure and Hole Mobility with Spin-Coating Speed
DeLongchamp, D. M., Vogel, B. M., Jung, Y., Gurau, M. C., Richter, C. A., Kirillov, O. A., Obrzut, J., Fischer, D. A., Sambasivan, S., Richter, L. J., et al. (2005) · Chemistry of Materials · doi:10.1021/cm0513637 · Cited by 243
Self-citationHighly Stable Semiconducting Polymers Based on Thiazolothiazole
Osaka, I., Zhang, R., Liu, J., Smilgies, D., Kowalewski, T., & McCullough, R. D. (2010) · Chemistry of Materials · doi:10.1021/cm101052b · Cited by 118
Cited by
Rivnay, J., Mannsfeld, S. C. B., Miller, C. E., Salleo, A., & Toney, M. F. (2012) · Chemical Reviews · doi:10.1021/cr3001109 · Cited by 1,419
Self-citationImide- and Amide-Functionalized Polymer Semiconductors
Guo, X., Facchetti, A., & Marks, T. J. (2014) · Chemical Reviews · doi:10.1021/cr500225d · Cited by 1,035
Thermal conductivity of polymers and polymer nanocomposites
Huang, C., Qian, X., & Yang, R. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.06.002 · Cited by 909
A stable solution-processed polymer semiconductor with record high-mobility for printed transistors
Li, J., Zhao, Y., Tan, H. S., Guo, Y., Di, C.-A., Yu, G., Liu, Y., Lin, M., Lim, S. H., Zhou, Y., et al. (2012) · Scientific Reports · doi:10.1038/srep00754 · Cited by 899
Nielsen, C. B., Turbiez, M., & McCulloch, I. (2013) · Advanced Materials · doi:10.1002/adma.201201795 · Cited by 882
Self-citation
Metadata
- Authors
- Zhang, X., Richter, L. J., DeLongchamp, D. M., Kline, R. J., Hammond, M. R., McCulloch, I., Heeney, M., Ashraf, R. S., Smith, J. N., Anthopoulos, T. D., Schroeder, B., Geerts, Y. H., Fischer, D. A., & Toney, M. F.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-09-02
- Volume
- 133
- Issue
- 38
- Pages
- 15073-15084
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2001746435
- Cited by
- 402
- References
- 29
- FWCI
- 29.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.