The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
New Iron-Based Mixed-Polyanion Cathodes for Lithium and Sodium Rechargeable Batteries: Combined First Principles Calculations and Experimental Study
Abstract
New iron-based mixed-polyanion compounds Li(x)Na(4-x)Fe(3)(PO(4))(2)(P(2)O(7)) (x = 0-3) were synthesized, and their crystal structures were determined. The new compounds contained three-dimensional (3D)sodium/lithium paths supported by P(2)O(7) pillars in the crystal. First principles calculations identified the complex 3D paths with their activation barriers and revealed them as fast ionic conductors. The reversible electrode operation was found in both Li and Na cells with capacities of one-electron reaction per Fe atom, 140 and 129 mAh g(-1), respectively. The redox potential of each phase was ∼3.4 V (vs Li) for the Li-ion cell and ∼3.2 V (vs Na) for the Na-ion cell. The properties of high power, small volume change, and high thermal stability were also recognized, presenting this new compound as a potential competitor to other iron-based electrodes such as Li(2)FeP(2)O(7), Li(2)FePO(4)F, and LiFePO(4).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Effect of Structure on the Fe3 + / Fe2 + Redox Couple in Iron Phosphates
Padhi, A. K., Nanjundaswamy, K. S., Masquelier, C., Okada, S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837649 · Cited by 1,295
A multifunctional 3.5 V iron-based phosphate cathode for rechargeable batteries
Ellis, B. L., Makahnouk, W. R. M., Makimura, Y., Toghill, K., & Nazar, L. F. (2007) · Nature Materials · doi:10.1038/nmat2007 · Cited by 964
Experimental visualization of lithium diffusion in LixFePO4
Nishimura, S.-I., Kobayashi, G., Ohoyama, K., Kanno, R., Yashima, M., & Yamada, A. (2008) · Nature Materials · doi:10.1038/nmat2251 · Cited by 756
Lithium extraction/insertion in LiFePO4: an X-ray diffraction and Mössbauer spectroscopy study
Andersson, A. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00311-8 · Cited by 691
A 3.6 V lithium-based fluorosulphate insertion positive electrode for lithium-ion batteries
Recham, N., Chotard, J.-N., Dupont, L., Delacourt, C., Walker, W., Armand, M., & Tarascon, J.-M. (2010) · Nature Materials · doi:10.1038/nmat2590 · Cited by 576
The existence of a temperature-driven solid solution in LixFePO4 for 0 ≤ x ≤ 1
Delacourt, C., Poizot, P., Tarascon, J.-M., & Masquelier, C. (2005) · Nature Materials · doi:10.1038/nmat1335 · Cited by 524
Barpanda, P., Ati, M., Melot, B. C., Rousse, G., Chotard, J., Doublet, M., Sougrati, M. T., Corr, S. A., Jumas, J. C., & Tarascon, J. (2011) · Nature Materials · doi:10.1038/nmat3093 · Cited by 343
Hautier, G., Jain, A., Chen, H., Moore, C., Ong, S. P., & Ceder, G. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12216a · Cited by 231
Tuning the Position of the Redox Couples in Materials with NASICON Structure by Anionic Substitution
Padhi, A. K., Manivannan, V., & Goodenough, J. B. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838513 · Cited by 211
Cited by
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Aqueous Rechargeable Li and Na Ion Batteries
Kim, H., Hong, J., Park, K.-Y., Kim, H., Kim, S.-W., & Kang, K. (2014) · Chemical Reviews · doi:10.1021/cr500232y · Cited by 1,493
Self-citationRecent Advances and Prospects of Cathode Materials for Sodium‐Ion Batteries
Xiang, X., Zhang, K., & Chen, J. (2015) · Advanced Materials · doi:10.1002/adma.201501527 · Cited by 1,160
Islam, M. S., & Fisher, C. A. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60199d · Cited by 1,079
Update on Na-based battery materials. A growing research path
Palomares, V., Casas-Cabanas, M., Castillo-Martínez, E., Han, M. H., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41031e · Cited by 992
Recent Progress in Electrode Materials for Sodium‐Ion Batteries
Kim, H., Kim, H., Ding, Z., Lee, M. H., Lim, K., Yoon, G., & Kang, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600943 · Cited by 986
Self-citationA 3.8-V earth-abundant sodium battery electrode
Barpanda, P., Oyama, G., Nishimura, S.-I., Chung, S.-C., & Yamada, A. (2014) · Nature Communications · doi:10.1038/ncomms5358 · Cited by 873
Charge carriers in rechargeable batteries: Na ions vs. Li ions
Hong, S. Y., Kim, Y., Park, Y., Choi, A., Choi, N.-S., & Lee, K. T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40811f · Cited by 830
Self-citationHigh Capacity and Rate Capability of Amorphous Phosphorus for Sodium Ion Batteries
Qian, J., Wu, X., Cao, Y., Ai, X., & Yang, H. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209689 · Cited by 696
A review of carbon materials and their composites with alloy metals for sodium ion battery anodes
Balogun, M.-S., Luo, Y., Qiu, W., Liu, P., & Tong, Y. (2016) · Carbon · doi:10.1016/j.carbon.2015.09.091 · Cited by 671
Materials Design for High‐Safety Sodium‐Ion Battery
Yang, C., Xin, S., Mai, L., & You, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000974 · Cited by 630
A critical review of cathodes for rechargeable Mg batteries
Mao, M., Gao, T., Hou, S., & Wang, C. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00319j · Cited by 591
Chen, M., Hua, W., Xiao, J., Cortie, D., Chen, W., Wang, E., Hu, Z., Gu, Q., Wang, X., Indris, S., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09170-5 · Cited by 522
Pan, H., Lu, X., Yu, X., Hu, Y., Li, H., Yang, X., & Chen, L. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300139 · Cited by 516
Recent developments in electrode materials for sodium-ion batteries
Wang, L. P., Yu, L., Wang, X., Srinivasan, M., & Xu, Z. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06467d · Cited by 468
A New High-Energy Cathode for a Na-Ion Battery with Ultrahigh Stability
Park, Y.-U., Seo, D.-H., Kwon, H.-S., Kim, B., Kim, J., Kim, H., Kim, I., Yoo, H.-I., & Kang, K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja406016j · Cited by 442
Self-citationNanowires for Electrochemical Energy Storage
Zhou, G., Xu, L., Hu, G., Mai, L., & Cui, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00326 · Cited by 439
Li, Y., Yang, Z., Xu, S., Mu, L., Gu, L., Hu, Y., Li, H., & Chen, L. (2015) · Advanced Science · doi:10.1002/advs.201500031 · Cited by 423
Kim, H., Park, I., Lee, S., Kim, H., Park, K.-Y., Park, Y.-U., Kim, H., Kim, J., Lim, H.-D., Yoon, W.-S., et al. (2013) · Chemistry of Materials · doi:10.1021/cm4013816 · Cited by 406
Self-citationPhosphate Framework Electrode Materials for Sodium Ion Batteries
Fang, Y., Zhang, J., Xiao, L., Ai, X., Cao, Y., & Yang, H. (2017) · Advanced Science · doi:10.1002/advs.201600392 · Cited by 381
Sodium iron pyrophosphate: A novel 3.0 V iron-based cathode for sodium-ion batteries
Barpanda, P., Ye, T., Nishimura, S.-I., Chung, S.-C., Yamada, Y., Okubo, M., Zhou, H., & Yamada, A. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.08.028 · Cited by 362
Park, Y., Seo, D., Kim, H., Kim, J., Lee, S., Kim, B., & Kang, K. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400561 · Cited by 351
Self-citationChallenges and Strategies toward Cathode Materials for Rechargeable Potassium‐Ion Batteries
Liu, S., Kang, L., & Jun, S. C. (2021) · Advanced Materials · doi:10.1002/adma.202004689 · Cited by 345
Chen, M., Liu, Q., Wang, S., Wang, E., Guo, X., & Chou, S. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803609 · Cited by 341
Na 3 V 2 (PO 4 ) 3 : an advanced cathode for sodium-ion batteries
Zhang, X., Rui, X., Chen, D., Tan, H., Yang, D., Huang, S., & Yu, Y. (2019) · Nanoscale · doi:10.1039/c8nr09391a · Cited by 336
Na3MnZr(PO4)3: A High-Voltage Cathode for Sodium Batteries
Gao, H., Seymour, I. D., Xin, S., Xue, L., Henkelman, G., & Goodenough, J. B. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b11388 · Cited by 312
Lee, J., Seo, D.-H., Balasubramanian, M., Twu, N., Li, X., & Ceder, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02329g · Cited by 269
Self-citationIhsan-Ul-Haq, M., Cui, J., Mubarak, N., Xu, M., Shen, X., Luo, Z., Huang, B., & Kim, J.-K. (2021) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202100072 · Cited by 22
Metadata
- Authors
- Kim, H., Park, I., Seo, D.-H., Lee, S., Kim, S.-W., Kwon, W. J., Park, Y.-U., Kim, C. S., Jeon, S., & Kang, K.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-06-14
- Volume
- 134
- Issue
- 25
- Pages
- 10369-10372
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2254539516
- Cited by
- 592
- References
- 14
- FWCI
- 20.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.