The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Superionic Conductivity in Lithium-Rich Anti-Perovskites
Abstract
Lithium ion batteries have shown great promise in electrical energy storage with enhanced energy density, power capacity, charge-discharge rates, and cycling lifetimes. However common fluid electrolytes consisting of lithium salts dissolved in solvents are toxic, corrosive, or flammable. Solid electrolytes with superionic conductivity can avoid those shortcomings and work with a metallic lithium anode, thereby allowing much higher energy densities. Here we present a novel class of solid electrolytes with three-dimensional conducting pathways based on lithium-rich anti-perovskites (LiRAP) with ionic conductivity of σ > 10(-3) S/cm at room temperature and activation energy of 0.2-0.3 eV. As temperature approaches the melting point, the ionic conductivity of the anti-perovskites increases to advanced superionic conductivity of σ > 10(-2) S/cm and beyond. The new crystalline materials can be readily manipulated via chemical, electronic, and structural means to boost ionic transport and serve as high-performance solid electrolytes for superionic Li(+) conduction in electrochemistry applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,250
Ionic conductivity in Li3N single crystals
Alpen, U. V., Rabenau, A., & Talat, G. H. (1977) · Applied Physics Letters · doi:10.1063/1.89283 · Cited by 437
Crystal Structures: A Working Approach
Duffin, W. J. (1974) · Physics Bulletin · doi:10.1088/0031-9112/25/6/039 · Cited by 427
High-Capacity Lithium–Air Cathodes
Beattie, S. D., Manolescu, D. M., & Blair, S. L. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3005989 · Cited by 285
Li+ ion conductivity and diffusion mechanism in α-Li3N and β-Li3N
Li, W., Wu, G., Araújo, C. M., Scheicher, R. H., Blomqvist, A., Ahuja, R., Xiong, Z., Feng, Y., & Chen, P. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00052c · Cited by 234
Cited by
Designing solid-state electrolytes for safe, energy-dense batteries
Zhao, Q., Stalin, S., Zhao, C.-Z., & Archer, L. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0165-5 · Cited by 2,372
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
Gao, Z., Sun, H., Fu, L., Ye, F., Zhang, Y., Luo, W., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705702 · Cited by 1,300
Understanding interface stability in solid-state batteries
Xiao, Y., Wang, Y., Bo, S.-H., Kim, J. C., Miara, L. J., & Ceder, G. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0157-5 · Cited by 1,219
Garnet-Type Solid-State Electrolytes: Materials, Interfaces, and Batteries
Wang, C., Fu, K., Kammampata, S. P., McOwen, D. W., Samson, A. J., Zhang, L., Hitz, G. T., Nolan, A. M., Wachsman, E. D., Mo, Y., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00427 · Cited by 1,212
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Chen, D., Chen, C., Baiyee, Z. M., Shao, Z., & Ciucci, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00073 · Cited by 936
Progress and perspectives on halide lithium conductors for all-solid-state lithium batteries
Li, X., Liang, J., Yang, X., Adair, K. R., Wang, C., Zhao, F., & Sun, X. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03828k · Cited by 755
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
Super Atomic Clusters: Design Rules and Potential for Building Blocks of Materials
Jena, P., & Sun, Q. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00524 · Cited by 673
Beyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Solid-state lithium batteries: Safety and prospects
Guo, Y., Wu, S., He, Y.-B., Kang, F., Chen, L., Li, H., & Yang, Q.-H. (2022) · eScience · doi:10.1016/j.esci.2022.02.008 · Cited by 507
Mechanisms and properties of ion-transport in inorganic solid electrolytes
Zhang, B., Tan, R., Yang, L., Zheng, J., Zhang, K., Mo, S., Lin, Z., & Pan, F. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.08.015 · Cited by 464
Solid-State Electrolytes for Lithium-Ion Batteries: Fundamentals, Challenges and Perspectives
Zhao, W., Yi, J., He, P., & Zhou, H. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-019-00048-0 · Cited by 464
Zhao, Y., Ding, Y., Li, Y., Peng, L., Byon, H. R., Goodenough, J. B., & Yu, G. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00289c · Cited by 458
Self-citationSendek, A. D., Yang, Q., Cubuk, E. D., Duerloo, K.-A. N., Cui, Y., & Reed, E. J. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02697d · Cited by 448
Elastic Properties of Alkali Superionic Conductor Electrolytes from First Principles Calculations
Deng, Z., Wang, Z., Chu, I.-H., Luo, J., & Ong, S. P. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0061602jes · Cited by 406
Computation-Accelerated Design of Materials and Interfaces for All-Solid-State Lithium-Ion Batteries
Nolan, A. M., Zhu, Y., He, X., Bai, Q., & Mo, Y. (2018) · Joule · doi:10.1016/j.joule.2018.08.017 · Cited by 398
Shao, Y., Wang, H., Gong, Z., Wang, D., Zheng, B., Zhu, J., Lu, Y., Hu, Y.-S., Guo, X., Li, H., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00453 · Cited by 381
Perovskite oxides – a review on a versatile material class for solar-to-fuel conversion processes
Kubicek, M., Bork, A. H., & Rupp, J. L. M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00987a · Cited by 316
Huang, J., Wu, K., Xu, G., Wu, M., Dou, S., & Wu, C. (2023) · Chemical Society Reviews · doi:10.1039/d2cs01029a · Cited by 304
Tanaka, Y., Ueno, K., Mizuno, K., Takeuchi, K., Asano, T., & Sakai, A. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202217581 · Cited by 295
Antiperovskite Electrolytes for Solid-State Batteries
Xia, W., Zhao, Y., Zhao, F., Adair, K., Zhao, R., Li, S., Zou, R., Zhao, Y., & Sun, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00594 · Cited by 288
Self-citationRechargeable Alkali-Ion Battery Materials: Theory and Computation
Van der Ven, A., Deng, Z., Banerjee, S., & Ong, S. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00601 · Cited by 264
Huang, H., Chen, Z., Yang, Y., Lin, Y., Fan, Y., Wu, X., Ji, Y., Wang, Y., Yang, C., Yu, Y., et al. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202414298 · Cited by 19
Metadata
- Authors
- Zhao, Y., & Daemen, L. L.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-08-30
- Volume
- 134
- Issue
- 36
- Pages
- 15042-15047
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2324167872
- Cited by
- 626
- References
- 7
- FWCI
- 6.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.