The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Microfluidic Approach toward Continuous and Ultrafast Synthesis of Metal–Organic Framework Crystals and Hetero Structures in Confined Microdroplets
Open accessAbstract
Herein, we report a novel nanoliter droplet-based microfluidic strategy for continuous and ultrafast synthesis of metal-organic framework (MOF) crystals and MOF heterostructures. Representative MOF structures, such as HKUST-1, MOF-5, IRMOF-3, and UiO-66, were synthesized within a few minutes via solvothermal reactions with substantially faster kinetics in comparison to the conventional batch processes. The approach was successfully extended to the preparation of a demanding Ru3BTC2 structure that requires high-pressure hydrothermal synthesis conditions. Finally, three different types of core-shell MOF composites, i.e., Co3BTC2@Ni3BTC2, MOF-5@diCH3-MOF-5, and Fe3O4@ZIF-8, were synthesized by exploiting a unique two-step integrated microfluidic synthesis scheme in a continuous-flow mode. The synthesized MOF crystals were characterized by X-ray diffraction, scanning electron microscopy, and BET surface area measurements. In comparison with bare MOF-5, MOF-5@diCH3-MOF-5 showed enhanced structural stability in the presence of moisture, and the catalytic performance of Fe3O4@ZIF-8 was examined using Knoevenagel condensation as a probe reaction. The microfluidic strategy allowed continuous fabrication of high-quality MOF crystals and composites exhibiting distinct morphological characteristics in a time-efficient manner and represents a viable alternative to the time-consuming and multistep MOF synthesis processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reticular synthesis and the design of new materials
Yaghi, O. M., O'Keeffe, M., Ockwig, N. W., Chae, H. K., Eddaoudi, M., & Kim, J. (2003) · Nature · doi:10.1038/nature01650 · Cited by 9,101
Self-citationDesign and synthesis of an exceptionally stable and highly porous metal-organic framework
Li, H., Eddaoudi, M., O'Keeffe, M., & Yaghi, O. M. (1999) · Nature · doi:10.1038/46248 · Cited by 8,554
A New Zirconium Inorganic Building Brick Forming Metal Organic Frameworks with Exceptional Stability
Cavka, J. H., Jakobsen, S., Olsbye, U., Guillou, N., Lamberti, C., Bordiga, S., & Lillerud, K. P. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8057953 · Cited by 7,336
A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ] n
Chui, S. S.-Y., Lo, S. M.-F., Charmant, J. P. H., Orpen, A. G., & Williams, I. D. (1999) · Science · doi:10.1126/science.283.5405.1148 · Cited by 6,063
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Rowsell, J. L. C., & Yaghi, O. M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056639q · Cited by 1,841
Kaye, S. S., Dailly, A., Yaghi, O. M., & Long, J. R. (2007) · Journal of the American Chemical Society · doi:10.1021/ja076877g · Cited by 1,660
Guest-Dependent Spin Crossover in a Nanoporous Molecular Framework Material
Halder, G. J., Kepert, C. J., Moubaraki, B., Murray, K. S., & Cashion, J. D. (2002) · Science · doi:10.1126/science.1075948 · Cited by 1,569
Yang, J., Sudik, A., Wolverton, C., & Siegel, D. J. (2010) · Chem. Soc. Rev. · doi:10.1039/b802882f · Cited by 1,227
Microdroplets in Microfluidics: An Evolving Platform for Discoveries in Chemistry and Biology
Theberge, A. B., Courtois, F., Schaerli, Y., Fischlechner, M., Abell, C., Hollfelder, F., & Huck, W. T. S. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200906653 · Cited by 1,059
Cited by
Emerging Droplet Microfluidics
Shang, L., Cheng, Y., & Zhao, Y. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00848 · Cited by 1,584
New synthetic routes towards MOF production at scale
Rubio-Martinez, M., Avci-Camur, C., Thornton, A. W., Imaz, I., Maspoch, D., & Hill, M. R. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00109f · Cited by 990
Structuring of metal–organic frameworks at the mesoscopic/macroscopic scale
Furukawa, S., Reboul, J., Diring, S., Sumida, K., & Kitagawa, S. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00106k · Cited by 897
ZIF-8: A comparison of synthesis methods
Lee, Y.-R., Jang, M.-S., Cho, H.-Y., Kwon, H.-J., Kim, S., & Ahn, W.-S. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.02.094 · Cited by 849
Self-citationMOF positioning technology and device fabrication
Falcaro, P., Ricco, R., Doherty, C. M., Liang, K., Hill, A. J., & Styles, M. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00089g · Cited by 710
MOF-on-MOF hybrids: Synthesis and applications
Liu, C., Wang, J., Wan, J., & Yu, C. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213743 · Cited by 621
Dai, H., Yuan, X., Jiang, L., Wang, H., Zhang, J., Zhang, J., & Xiong, T. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2021.213985 · Cited by 503
Applications of water-stable metal-organic frameworks in the removal of water pollutants: A review
Zhang, S., Wang, J., Zhang, Y., Ma, J., Huang, L., Yu, S., Chen, L., Song, G., Qiu, M., & Wang, X. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2021.118076 · Cited by 458
A Modulated Hydrothermal (MHT) Approach for the Facile Synthesis of UiO-66-Type MOFs
Hu, Z., Peng, Y., Kang, Z., Qian, Y., & Zhao, D. (2015) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b00435 · Cited by 436
Large‐Scale Production of Metal–Organic Frameworks
Chakraborty, D., Yurdusen, A., Mouchaham, G., Nouar, F., & Serre, C. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202309089 · Cited by 421
Cheng, N., Ren, L., Xu, X., Du, Y., & Dou, S. X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801257 · Cited by 359
Mo, Z., Tai, D., Zhang, H., & Shahab, A. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.136320 · Cited by 338
Peng, Y., Wong, W. K., Hu, Z., Cheng, Y., Yuan, D., Khan, S. A., & Zhao, D. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01954 · Cited by 329
Applications of magnetic metal–organic framework composites
Ricco, R., Malfatti, L., Takahashi, M., Hill, A. J., & Falcaro, P. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13140h · Cited by 316
Moragues, T., Arguijo, D., Beneyton, T., Modavi, C., Simutis, K., Abate, A. R., Baret, J.-C., deMello, A. J., Densmore, D., & Griffiths, A. D. (2023) · Nature Reviews Methods Primers · doi:10.1038/s43586-023-00212-3 · Cited by 316
Multi-scale crystal engineering of metal organic frameworks
Seoane, B., Castellanos, S., Dikhtiarenko, A., Kapteijn, F., & Gascon, J. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.06.008 · Cited by 304
Rational Design and Growth of MOF‐on‐MOF Heterostructures
Chai, L., Pan, J., Hu, Y., Qian, J., & Hong, M. (2021) · Small · doi:10.1002/smll.202100607 · Cited by 287
Hu, C., Bai, Y., Hou, M., Wang, Y., Wang, L., Cao, X., Chan, C.-W., Sun, H., Li, W., Ge, J., et al. (2020) · Science Advances · doi:10.1126/sciadv.aax5785 · Cited by 286
Beg, S., Rahman, M., Jain, A., Saini, S., Midoux, P., Pichon, C., Ahmad, F. J., & Akhter, S. (2017) · Drug Discovery Today · doi:10.1016/j.drudis.2016.10.001 · Cited by 284
Metadata
- Authors
- Faustini, M., Kim, J., Jeong, G.-Y., Kim, J. Y., Moon, H. R., Ahn, W.-S., & Kim, D.-P.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-09-18
- Volume
- 135
- Issue
- 39
- Pages
- 14619-14626
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2005588386
- Cited by
- 374
- References
- 29
- FWCI
- 10.37
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.