The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Toward an Ideal Polymer Binder Design for High-Capacity Battery Anodes
Open accessAbstract
The dilemma of employing high-capacity battery materials and maintaining the electronic and mechanical integrity of electrodes demands novel designs of binder systems. Here, we developed a binder polymer with multifunctionality to maintain high electronic conductivity, mechanical adhesion, ductility, and electrolyte uptake. These critical properties are achieved by designing polymers with proper functional groups. Through synthesis, spectroscopy, and simulation, electronic conductivity is optimized by tailoring the key electronic state, which is not disturbed by further modifications of side chains. This fundamental allows separated optimization of the mechanical and swelling properties without detrimental effect on electronic property. Remaining electronically conductive, the enhanced polarity of the polymer greatly improves the adhesion, ductility, and more importantly, the electrolyte uptake to the levels of those available only in nonconductive binders before. We also demonstrate directly the performance of the developed conductive binder by achieving full-capacity cycling of silicon particles without using any conductive additive.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Self-citationNanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells
Kasavajjula, U., Wang, C., & Appleby, A. J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.084 · Cited by 2,491
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
High-performance lithium-ion anodes using a hierarchical bottom-up approach
Magasinski, A., Dixon, P., Hertzberg, B., Kvit, A., Ayala, J., & Yushin, G. (2010) · Nature Materials · doi:10.1038/nmat2725 · Cited by 2,044
A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes
Liu, N., Wu, H., McDowell, M. T., Yao, Y., Wang, C., & Cui, Y. (2012) · Nano Letters · doi:10.1021/nl3014814 · Cited by 1,842
Cited by
Silicon‐Based Anodes for Lithium‐Ion Batteries: From Fundamentals to Practical Applications
Feng, K., Li, M., Liu, W., Kashkooli, A. G., Xiao, X., Cai, M., & Chen, Z. (2018) · Small · doi:10.1002/smll.201702737 · Cited by 1,042
Self-citationChen, H., Ling, M., Hencz, L., Ling, H. Y., Li, G., Lin, Z., Liu, G., & Zhang, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00241 · Cited by 958
Self-citationNanostructured conductive polymers for advanced energy storage
Shi, Y., Peng, L., Ding, Y., Zhao, Y., & Yu, G. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00362h · Cited by 932
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
The emerging era of supramolecular polymeric binders in silicon anodes
Kwon, T.-W., Choi, J. W., & Coskun, A. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00858a · Cited by 560
Higgins, T. M., Park, S.-H., King, P. J., Zhang, C. (., McEvoy, N., Berner, N. C., Daly, D., Shmeliov, A., Khan, U., Duesberg, G., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b00218 · Cited by 481
Research progress on silicon/carbon composite anode materials for lithium-ion battery
Shen, X., Tian, Z., Fan, R., Shao, L., Zhang, D., Cao, G., Kou, L., & Bai, Y. (2018) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.12.012 · Cited by 451
A Review of Functional Binders in Lithium–Sulfur Batteries
Yuan, H., Huang, J., Peng, H., Titirici, M., Xiang, R., Chen, R., Liu, Q., & Zhang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802107 · Cited by 438
Li, Z., Zhang, Y., Liu, T., Gao, X., Li, S., Ling, M., Liang, C., Zheng, J., & Lin, Z. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903110 · Cited by 404
Zeng, W., Wang, L., Peng, X., Liu, T., Jiang, Y., Qin, F., Hu, L., Chu, P. K., Huo, K., & Zhou, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702314 · Cited by 389
Self-citationHigh capacity silicon anodes enabled by MXene viscous aqueous ink
Zhang, C., Park, S.-H., Seral‐Ascaso, A., Barwich, S., McEvoy, N., Boland, C. S., Coleman, J. N., Gogotsi, Y., & Nicolosi, V. (2019) · Nature Communications · doi:10.1038/s41467-019-08383-y · Cited by 365
Chen, Z., To, J. W. F., Wang, C., Lu, Z., Liu, N., Chortos, A., Pan, L., Wei, F., Cui, Y., & Bao, Z. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400207 · Cited by 364
Shi, Y., Zhou, X., & Yu, G. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00402 · Cited by 361
Ionically Conductive Self‐Healing Binder for Low Cost Si Microparticles Anodes in Li‐Ion Batteries
Munaoka, T., Yan, X., Lopez, J., To, J. W. F., Park, J., Tok, J. B. ‐., Cui, Y., & Bao, Z. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703138 · Cited by 322
Role of Polyacrylic Acid (PAA) Binder on the Solid Electrolyte Interphase in Silicon Anodes
Parikh, P., Sina, M., Banerjee, A., Wang, X., D’Souza, M. S., Doux, J.-M., Wu, E. A., Trieu, O. Y., Gong, Y., Zhou, Q., et al. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b05020 · Cited by 265
Nanoscale Phenomena in Lithium-Ion Batteries
Jung, S.-K., Hwang, I., Chang, D., Park, K.-Y., Kim, S. J., Seong, W. M., Eum, D., Park, J., Kim, B., Kim, J., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00405 · Cited by 253
Understanding inks for porous-electrode formation
Hatzell, K. B., Dixit, M. B., Berlinger, S. A., & Weber, A. Z. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07255d · Cited by 97
Self-citation
Metadata
- Authors
- Wu, M., Xiao, X., Vukmirovic, N., Xun, S., Das, P. K., Song, X., Olalde-Velasco, P., Wang, D., Weber, A. Z., Wang, L.-W., Battaglia, V. S., Yang, W., & Liu, G.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-07-31
- Volume
- 135
- Issue
- 32
- Pages
- 12048-12056
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2170943742
- Cited by
- 398
- References
- 31
- FWCI
- 17.37
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
