The DOI matches its Crossref record.
Enhancing the Hole-Conductivity of Spiro-OMeTAD without Oxygen or Lithium Salts by Using Spiro(TFSI)2 in Perovskite and Dye-Sensitized Solar Cells
Abstract
2,2',7,7'-Tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD), the prevalent organic hole transport material used in solid-state dye-sensitized solar cells and perovskite-absorber solar cells, relies on an uncontrolled oxidative process to reach appreciable conductivity. This work presents the use of a dicationic salt of spiro-OMeTAD, named spiro(TFSI)2, as a facile means of controllably increasing the conductivity of spiro-OMeTAD up to 10(-3) S cm(-1) without relying on oxidation in air. Spiro(TFSI)2 enables the first demonstration of solid-state dye-sensitized solar cells fabricated and operated with the complete exclusion of oxygen after deposition of the sensitizer with higher and more reproducible device performance. Perovskite-absorber solar cells fabricated with spiro(TFSI)2 show improved operating stability in an inert atmosphere. Gaining control of the conductivity of the HTM in both dye-sensitized and perovskite-absorber solar cells in an inert atmosphere using spiro(TFSI)2 is an important step toward the commercialization of these technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
Inactive (PbI 2 ) 2 RbCl stabilizes perovskite films for efficient solar cells
Zhao, Y., Ma, F., Qu, Z., Yu, S., Shen, T., Deng, H.-X., Chu, X., Peng, X., Yuan, Y., Zhang, X., et al. (2022) · Science · doi:10.1126/science.abp8873 · Cited by 1,445
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
Perovskites for Next-Generation Optical Sources
Quan, L. N., Rand, B. P., Friend, R. H., Mhaisalkar, S. G., Lee, T.-W., & Sargent, E. H. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00107 · Cited by 983
Wang, W., Tadé, M. O., & Shao, Z. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00113g · Cited by 922
Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability
Christians, J. A., Schulz, P., Tinkham, J. S., Schloemer, T. H., Harvey, S. P., Tremolet de Villers, B. J., Sellinger, A., Berry, J. J., & Luther, J. M. (2018) · Nature Energy · doi:10.1038/s41560-017-0067-y · Cited by 828
Chueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
In situ observation of heat-induced degradation of perovskite solar cells
Divitini, G., Cacovich, S., Matteocci, F., Cinà, L., Di Carlo, A., & Ducati, C. (2016) · Nature Energy · doi:10.1038/nenergy.2015.12 · Cited by 782
Semi-transparent perovskite solar cells for tandems with silicon and CIGS
Bailie, C. D., Christoforo, M. G., Mailoa, J. P., Bowring, A. R., Unger, E. L., Nguyen, W. H., Burschka, J., Pellet, N., Lee, J. Z., Grätzel, M., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03322a · Cited by 741
Self-citationLessons learned from spiro-OMeTAD and PTAA in perovskite solar cells
Rombach, F. M., Haque, S. A., & Macdonald, T. J. (2021) · Energy & Environmental Science · doi:10.1039/d1ee02095a · Cited by 730
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Monolithic perovskite/silicon-heterojunction tandem solar cells processed at low temperature
Albrecht, S., Saliba, M., Correa Baena, J. P., Lang, F., Kegelmann, L., Mews, M., Steier, L., Abate, A., Rappich, J., Korte, L., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02965a · Cited by 649
Extrinsic ion migration in perovskite solar cells
Li, Z., Xiao, C., Yang, Y., Harvey, S. P., Kim, D. H., Christians, J. A., Yang, M., Schulz, P., Nanayakkara, S. U., Jiang, C.-S., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00358g · Cited by 631
Lüssem, B., Keum, C.-M., Kasemann, D., Naab, B., Bao, Z., & Leo, K. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00329 · Cited by 627
Recent progress in electron transport layers for efficient perovskite solar cells
Yang, G., Tao, H., Qin, P., Ke, W., & Fang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09011c · Cited by 579
The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication
Eperon, G. E., Habisreutinger, S. N., Leijtens, T., Bruijnaers, B. J., van Franeker, J. J., deQuilettes, D. W., Pathak, S., Sutton, R. J., Grancini, G., Ginger, D. S., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b03626 · Cited by 574
Dye-sensitized solar cells strike back
Muñoz-García, A. B., Benesperi, I., Boschloo, G., Concepcion, J. J., Delcamp, J. H., Gibson, E. A., Meyer, G. J., Pavone, M., Pettersson, H., Hagfeldt, A., et al. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01336f · Cited by 544
Jošt, M., Kegelmann, L., Korte, L., & Albrecht, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904102 · Cited by 538
Conducting Polymers in the Fields of Energy, Environmental Remediation, and Chemical–Chiral Sensors
Ibanez, J. G., Rincón, M. E., Gutierrez-Granados, S., Chahma, M., Jaramillo-Quintero, O. A., & Frontana-Uribe, B. A. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00482 · Cited by 493
Impact of H2O on organic–inorganic hybrid perovskite solar cells
Huang, J., Tan, S., Lund, P. D., & Zhou, H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01674c · Cited by 489
Perovskite solar cells: film formation and properties
Song, T.-B., Chen, Q., Zhou, H., Jiang, C., Wang, H.-H., (Michael) Yang, Y., Liu, Y., You, J., & Yang, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05246c · Cited by 483
Improved Phase Stability of Formamidinium Lead Triiodide Perovskite by Strain Relaxation
Zheng, X., Wu, C., Jha, S. K., Li, Z., Zhu, K., & Priya, S. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00457 · Cited by 474
Advances in hole transport materials engineering for stable and efficient perovskite solar cells
Bakr, Z. H., Wali, Q., Fakharuddin, A., Schmidt-Mende, L., Brown, T. M., & Jose, R. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.025 · Cited by 455
Hawash, Z., Ono, L. K., & Qi, Y. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201700623 · Cited by 455
Stability of perovskite solar cells: issues and prospects
Chowdhury, T. A., Bin Zafar, M. A., Sajjad-Ul Islam, M., Shahinuzzaman, M., Islam, M. A., & Khandaker, M. U. (2023) · RSC Advances · doi:10.1039/d2ra05903g · Cited by 444
Ion-modulated radical doping of spiro-OMeTAD for more efficient and stable perovskite solar cells
Zhang, T., Wang, F., Kim, H.-B., Choi, I.-W., Wang, C., Cho, E., Konefal, R., Puttisong, Y., Terado, K., Kobera, L., et al. (2022) · Science · doi:10.1126/science.abo2757 · Cited by 432
Heterovalent Dopant Incorporation for Bandgap and Type Engineering of Perovskite Crystals
Abdelhady, A. L., Saidaminov, M. I., Murali, B., Adinolfi, V., Voznyy, O., Katsiev, K., Alarousu, E., Comin, R., Dursun, I., Sinatra, L., et al. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02681 · Cited by 409
Schloemer, T. H., Christians, J. A., Luther, J. M., & Sellinger, A. (2019) · Chemical Science · doi:10.1039/c8sc05284k · Cited by 384
Copper oxide as inorganic hole transport material for lead halide perovskite based solar cells
Hossain, M. I., Alharbi, F. H., & Tabet, N. (2015) · Solar Energy · doi:10.1016/j.solener.2015.07.040 · Cited by 377
Liang, P., Chueh, C., Williams, S. T., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402321 · Cited by 353
Interfaces in Perovskite Solar Cells
Fakharuddin, A., Schmidt‐Mende, L., Garcia‐Belmonte, G., Jose, R., & Mora‐Sero, I. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700623 · Cited by 349
Ionic Reactivity at Contacts and Aging of Methylammonium Lead Triiodide Perovskite Solar Cells
Carrillo, J., Guerrero, A., Rahimnejad, S., Almora, O., Zarazua, I., Mas‐Marza, E., Bisquert, J., & Garcia‐Belmonte, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502246 · Cited by 339
Strategies of modifying spiro-OMeTAD materials for perovskite solar cells: a review
Ren, G., Han, W., Deng, Y., Wu, W., Li, Z., Guo, J., Bao, H., Liu, C., & Guo, W. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta11564a · Cited by 294
Unveiling the Role of tBP–LiTFSI Complexes in Perovskite Solar Cells
Wang, S., Huang, Z., Wang, X., Li, Y., Günther, M., Valenzuela, S., Parikh, P., Cabreros, A., Xiong, W., & Meng, Y. S. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b09809 · Cited by 292
Organic Cation‐Dependent Degradation Mechanism of Organotin Halide Perovskites
Wang, F., Ma, J., Xie, F., Li, L., Chen, J., Fan, J., & Zhao, N. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505127 · Cited by 285
Najafi, L., Taheri, B., Martín-García, B., Bellani, S., Di Girolamo, D., Agresti, A., Oropesa-Nuñez, R., Pescetelli, S., Vesce, L., Calabrò, E., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b05514 · Cited by 264
Arrechea, S., Aljarilla, A., de la Cruz, P., Palomares, E., Sharma, G. D., & Langa, F. (2016) · Nanoscale · doi:10.1039/c6nr06374h · Cited by 27
Metadata
- Authors
- Nguyen, W. H., Bailie, C. D., Unger, E. L., & McGehee, M. D.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-07-29
- Volume
- 136
- Issue
- 31
- Pages
- 10996-11001
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2171118682
- Cited by
- 611
- References
- 0
- FWCI
- 22.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.