The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
High Hydrogen Storage Capacity of Porous Carbons Prepared by Using Activated Carbon
Abstract
A kind of activated carbon with further carbon dioxide and potassium hydroxide activations for hydrogen storage was investigated. The carbon dioxide and potassium hydroxide activations have apparently different effects on the pore structures and textures of the activated carbon which closely associated with the hydrogen storage properties. The potassium hydroxide activation can remarkably donate microporosity to the frameworks of the activated carbon. One of the resultant porous carbons exhibited a high surface area of up to 3190 m(2) g(-1) and large gravimetric hydrogen uptake capacity of 7.08 wt % at 77 K and 20 bar, which is one of the largest data reported for the porous carbon materials. This result suggests that the porous carbon with large amounts of active sites, high surface area, and high micropore volume related to optimum pore size could achieve high gravimetric hydrogen storage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogen-storage materials for mobile applications
Schlapbach, L., & Züttel, A. (2001) · Nature · doi:10.1038/35104634 · Cited by 8,865
Anomalous Increase in Carbon Capacitance at Pore Sizes Less Than 1 Nanometer
Chmiola, J., Yushin, G., Gogotsi, Y., Portet, C., Simon, P., & Taberna, P. L. (2006) · Science · doi:10.1126/science.1132195 · Cited by 4,022
A route to high surface area, porosity and inclusion of large molecules in crystals
Materials Design and Discovery Group, Chae, H. K., Siberio-Pérez, D. Y., Kim, J., Go, Y., Eddaoudi, M., Matzger, A. J., O'Keeffe, M., & Yaghi, O. M. (2004) · Nature · doi:10.1038/nature02311 · Cited by 2,816
Nanocasting: A Versatile Strategy for Creating Nanostructured Porous Materials
Lu, A. ‐., & Schüth, F. (2006) · Advanced Materials · doi:10.1002/adma.200600148 · Cited by 1,321
Understanding chemical reactions between carbons and NaOH and KOH
Lillo-Ródenas, M. A., Cazorla-Amorós, D., & Linares-Solano, A. (2003) · Carbon · doi:10.1016/s0008-6223(02)00279-8 · Cited by 1,199
Mechanism of lithium insertion in hard carbons prepared by pyrolysis of epoxy resins
Liu, Y., Xue, J. S., Zheng, T., & Dahn, J. R. (1996) · Carbon · doi:10.1016/0008-6223(96)00177-7 · Cited by 732
Nanoporous carbide-derived carbon with tunable pore size
Gogotsi, Y., Nikitin, A., Ye, H., Zhou, W., Fischer, J. E., Yi, B., Foley, H. C., & Barsoum, M. W. (2003) · Nature Materials · doi:10.1038/nmat957 · Cited by 708
Enhanced Hydrogen Storage Capacity of High Surface Area Zeolite-like Carbon Materials
Yang, Z., Xia, Y., & Mokaya, R. (2007) · Journal of the American Chemical Society · doi:10.1021/ja067149g · Cited by 622
Supercapacitors from Activated Carbon Derived from Banana Fibers
Subramanian, V., Luo, C., Stephan, A. M., Nahm, K. S., Thomas, S., & Wei, B. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp067009t · Cited by 604
Hydrogen storage on chemically activated carbons and carbon nanomaterials at high pressures
Jordá-Beneyto, M., Suárez-García, F., Lozano-Castelló, D., Cazorla-Amorós, D., & Linares-Solano, A. (2007) · Carbon · doi:10.1016/j.carbon.2006.09.022 · Cited by 492
Cited by
KOH activation of carbon-based materials for energy storage
Wang, J., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34066f · Cited by 2,726
Jiang, H.-L., Liu, B., Lan, Y.-Q., Kuratani, K., Akita, T., Shioyama, H., Zong, F., & Xu, Q. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203184k · Cited by 1,197
Microwave assisted exfoliation and reduction of graphite oxide for ultracapacitors
Zhu, Y., Murali, S., Stoller, M. D., Velamakanni, A., Piner, R. D., & Ruoff, R. S. (2010) · Carbon · doi:10.1016/j.carbon.2010.02.001 · Cited by 869
(2021) · doi:10.1016/j.rser.2021.111311 · Cited by 850
Carbon nanotube catalysts: recent advances in synthesis, characterization and applications
Yan, Y., Miao, J., Yang, Z., Xiao, F.-X., Yang, H. B., Liu, B., & Yang, Y. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00492b · Cited by 798
Yu, X., Tang, Z., Sun, D., Ouyang, L., & Zhu, M. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.03.001 · Cited by 716
Defects on carbons for electrocatalytic oxygen reduction
Yan, X., Jia, Y., & Yao, X. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00690j · Cited by 593
The role of palladium in a hydrogen economy
Adams, B. D., & Chen, A. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70143-2 · Cited by 565
Yang, S., Wang, S., Liu, X., & Li, L. (2019) · Carbon · doi:10.1016/j.carbon.2019.03.023 · Cited by 538
Biomass-derived carbon electrode materials for supercapacitors
Lu, H., & Zhao, X. S. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00099e · Cited by 396
Ou, J., Zhang, Y., Chen, L., Zhao, Q., Meng, Y., Guo, Y., & Xiao, D. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06614f · Cited by 340
Xie, M., Chen, W., Xu, Z., Zheng, S., & Zhu, D. (2014) · Environmental Pollution · doi:10.1016/j.envpol.2013.11.022 · Cited by 298
Activated carbon with optimum pore size distribution for hydrogen storage
Sethia, G., & Sayari, A. (2016) · Carbon · doi:10.1016/j.carbon.2015.12.032 · Cited by 288
Kim, M., Xu, X., Xin, R., Earnshaw, J., Ashok, A., Kim, J., Park, T., Nanjundan, A. K., El-Said, W. A., Yi, J. W., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c09107 · Cited by 268
Biomass derived hierarchical porous carbons as high-performance anodes for sodium-ion batteries
Wang, H., Yu, W., Shi, J., Mao, N., Chen, S., & Liu, W. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2015.12.002 · Cited by 265
Self-citationSun, Y., & Webley, P. A. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.06.031 · Cited by 256
Boorboor Ajdari, F., Kowsari, E., Niknam Shahrak, M., Ehsani, A., Kiaei, Z., Torkzaban, H., Ershadi, M., Kholghi Eshkalak, S., Haddadi-Asl, V., Chinnappan, A., et al. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213441 · Cited by 253
Xiang, Y., Lu, L., Kottapalli, A. G. P., & Pei, Y. (2022) · Carbon Energy · doi:10.1002/cey2.185 · Cited by 253
Sangchoom, W., & Mokaya, R. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00351 · Cited by 193
Mukherjee, A., Patra, B. R., Podder, J., & Dalai, A. K. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.870184 · Cited by 165
Electrode materials derived from plastic wastes and other industrial wastes for supercapacitors
Utetiwabo, W., Yang, L., Tufail, M. K., Zhou, L., Chen, R., Lian, Y., & Yang, W. (2020) · Chinese Chemical Letters · doi:10.1016/j.cclet.2020.01.003 · Cited by 114
Porous carbon fabrication techniques: A review
Kobina Sam, D., Li, H., Xu, Y.-T., & Cao, Y. (2024) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.01.044 · Cited by 46
(2020) · doi:10.1016/j.carbon.2020.01.099 · Cited by 44
Wu, X., Tian, Z., Hu, L., Huang, S., & Cai, J. (2017) · RSC Advances · doi:10.1039/c7ra05355j · Cited by 41
Metadata
- Authors
- Wang, H., Gao, Q., & Hu, J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-04-30
- Volume
- 131
- Issue
- 20
- Pages
- 7016-7022
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W1982805474
- Cited by
- 593
- References
- 33
- FWCI
- 11.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.