The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Multifunctional Fullerene Derivative for Interface Engineering in Perovskite Solar Cells
Abstract
In perovskite based planar heterojunction solar cells, the interface between the TiO2 compact layer and the perovskite film is critical for high photovoltaic performance. The deep trap states on the TiO2 surface induce several challenging issues, such as charge recombination loss and poor stability etc. To solve the problems, we synthesized a triblock fullerene derivative (PCBB-2CN-2C8) via rational molecular design for interface engineering in the perovskite solar cells. Modifying the TiO2 surface with the compound significantly improves charge extraction from the perovskite layer. Together with its uplifted surface work function, open circuit voltage and fill factor are dramatically increased from 0.99 to 1.06 V, and from 72.2% to 79.1%, respectively, resulting in 20.7% improvement in power conversion efficiency for the best performing devices. Scrutinizing the electrical properties of this modified interfacial layer strongly suggests that PCBB-2CN-2C8 passivates the TiO2 surface and thus reduces charge recombination loss caused by the deep trap states of TiO2. The passivation effect is further proven by stability testing of the perovskite solar cells with shelf lifetime under ambient conditions improved by a factor of more than 4, from ∼40 h to ∼200 h, using PCBB-2CN-2C8 as the TiO2 modification layer. This work offers not only a promising material for cathode interface engineering, but also provides a viable approach to address the challenges of deep trap states on TiO2 surface in planar perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Titanium dioxide photocatalysis
Fujishima, A., Rao, T. N., & Tryk, D. A. (2000) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/s1389-5567(00)00002-2 · Cited by 7,916
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Self-citationHigh-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Metal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Cited by
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Self-citationJiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21%
Jiang, Q., Chu, Z., Wang, P., Yang, X., Liu, H., Wang, Y., Yin, Z., Wu, J., Zhang, X., & You, J. (2017) · Advanced Materials · doi:10.1002/adma.201703852 · Cited by 1,250
A Eu 3+ -Eu 2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells
Wang, L., Zhou, H., Hu, J., Huang, B., Sun, M., Dong, B., Zheng, G., Huang, Y., Chen, Y., Li, L., et al. (2019) · Science · doi:10.1126/science.aau5701 · Cited by 1,093
Self-citationAdditive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Recent Progresses on Defect Passivation toward Efficient Perovskite Solar Cells
Gao, F., Zhao, Y., Zhang, X., & You, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902650 · Cited by 782
Self-citationBiomedicine Meets Fenton Chemistry
Tang, Z., Zhao, P., Wang, H., Liu, Y., & Bu, W. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00977 · Cited by 745
Self-citationCauses and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Lin, Y., Shen, L., Dai, J., Deng, Y., Wu, Y., Bai, Y., Zheng, X., Wang, J., Fang, Y., Wei, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604545 · Cited by 640
Stabilizing heterostructures of soft perovskite semiconductors
Wang, Y., Wu, T., Barbaud, J., Kong, W., Cui, D., Chen, H., Yang, X., & Han, L. (2019) · Science · doi:10.1126/science.aax8018 · Cited by 585
Ke, W., Xiao, C., Wang, C., Saparov, B., Duan, H., Zhao, D., Xiao, Z., Schulz, P., Harvey, S. P., Liao, W., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600594 · Cited by 579
Defects engineering for high-performance perovskite solar cells
Wang, F., Bai, S., Tress, W., Hagfeldt, A., & Gao, F. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0035-z · Cited by 568
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Huang, C., Fu, W., Li, C.-Z., Zhang, Z., Qiu, W., Shi, M., Heremans, P., Jen, A. K.-Y., & Chen, H. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00039 · Cited by 489
High-performance perovskite/Cu(In,Ga)Se 2 monolithic tandem solar cells
Han, Q., Hsieh, Y.-T., Meng, L., Wu, J.-L., Sun, P., Yao, E.-P., Chang, S.-Y., Bae, S.-H., Kato, T., Bermudez, V., et al. (2018) · Science · doi:10.1126/science.aat5055 · Cited by 451
Self-citationRajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells
Zuo, L., Chen, Q., De Marco, N., Hsieh, Y.-T., Chen, H., Sun, P., Chang, S.-Y., Zhao, H., Dong, S., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04015 · Cited by 373
Self-citationA review of aspects of additive engineering in perovskite solar cells
Mahapatra, A., Prochowicz, D., Tavakoli, M. M., Trivedi, S., Kumar, P., & Yadav, P. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta07657c · Cited by 369
Xie, J., Huang, K., Yu, X., Yang, Z., Xiao, K., Qiang, Y., Zhu, X., Xu, L., Wang, P., Cui, C., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b04070 · Cited by 365
Interfaces in Perovskite Solar Cells
Fakharuddin, A., Schmidt‐Mende, L., Garcia‐Belmonte, G., Jose, R., & Mora‐Sero, I. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700623 · Cited by 349
Chen, W., Zhang, J., Xu, G., Xue, R., Li, Y., Zhou, Y., Hou, J., & Li, Y. (2018) · Advanced Materials · doi:10.1002/adma.201800855 · Cited by 348
Self-citationAll‐Carbon‐Electrode‐Based Endurable Flexible Perovskite Solar Cells
Luo, Q., Ma, H., Hou, Q., Li, Y., Ren, J., Dai, X., Yao, Z., Zhou, Y., Xiang, L., Du, H., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706777 · Cited by 346
Self-citationHybrid Perovskite/Perovskite Heterojunction Solar Cells
Hu, Y., Schlipf, J., Wussler, M., Petrus, M. L., Jaegermann, W., Bein, T., Müller-Buschbaum, P., & Docampo, P. (2016) · ACS Nano · doi:10.1021/acsnano.6b01535 · Cited by 345
Luo, B., Pu, Y., Lindley, S. A., Yang, Y., Lu, L., Li, Y., Li, X., & Zhang, J. Z. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201602236 · Cited by 334
Self-citationYou, S., Zeng, H., Ku, Z., Wang, X., Wang, Z., Rong, Y., Zhao, Y., Zheng, X., Luo, L., Li, L., et al. (2020) · Advanced Materials · doi:10.1002/adma.202003990 · Cited by 329
Self-citationTavakoli, M. M., Yadav, P., Tavakoli, R., & Kong, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800794 · Cited by 325
Fundamental Understanding of Photocurrent Hysteresis in Perovskite Solar Cells
Liu, P., Wang, W., Liu, S., Yang, H., & Shao, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803017 · Cited by 321
Han, J., Park, K., Tan, S., Vaynzof, Y., Xue, J., Diau, E. W.-G., Bawendi, M. G., Lee, J.-W., & Jeon, I. (2025) · Nature Reviews Methods Primers · doi:10.1038/s43586-024-00373-9 · Cited by 304
Hysteresis-free low-temperature-processed planar perovskite solar cells with 19.1% efficiency
Yoon, H., Kang, S. M., Lee, J.-K., & Choi, M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01037g · Cited by 302
Ali, F., Roldán‐Carmona, C., Sohail, M., & Nazeeruddin, M. K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002989 · Cited by 296
Qiu, L., Ono, L. K., & Qi, Y. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2017.09.008 · Cited by 286
Impact of Interfacial Layers in Perovskite Solar Cells
Cho, A., & Park, N. (2017) · ChemSusChem · doi:10.1002/cssc.201701095 · Cited by 281
Fullerene derivative anchored SnO2 for high-performance perovskite solar cells
Liu, K., Chen, S., Wu, J., Zhang, H., Qin, M., Lu, X., Tu, Y., Meng, Q., & Zhan, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02172d · Cited by 261
The Functions of Fullerenes in Hybrid Perovskite Solar Cells
Fang, Y., Bi, C., Wang, D., & Huang, J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00657 · Cited by 254
She, C., Huang, Q., Chen, C., Jiang, Y., Fan, Z., & Gao, J. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta08194b · Cited by 59
Metadata
- Authors
- Li, Y., Zhao, Y., Chen, Q., Yang, Y. (., Liu, Y., Hong, Z., Liu, Z., Hsieh, Y.-T., Meng, L., Li, Y., & Yang, Y.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-04
- Volume
- 137
- Issue
- 49
- Pages
- 15540-15547
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2229109093
- Cited by
- 539
- References
- 36
- FWCI
- 34.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.