The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
TiO2–ZnS Cascade Electron Transport Layer for Efficient Formamidinium Tin Iodide Perovskite Solar Cells
Abstract
Achieving high open-circuit voltage ( V oc ) for tin-based perovskite solar cells is challenging. Here, we demonstrate that a ZnS interfacial layer can improve the V oc and photovoltaic performance of formamidinium tin iodide (FASnI 3 ) perovskite solar cells. The TiO 2 –ZnS electron transporting layer (ETL) with cascade conduction band structure can effectively reduce the interfacial charge recombination and facilitate electron transfer. Our best-performing FASnI 3 perovskite solar cell using the cascaded TiO 2 –ZnS ETL has achieved a power conversion efficiency of 5.27%, with a higher V oc of 0.380 V, a short-circuit current density of 23.09 mA cm –2, and a fill factor of 60.01%. The cascade structure is further validated with a TiO 2 –CdS ETL. Our results suggest a new approach for further improving the performance of tin-based perovskite solar cells with a higher V oc .
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Self-citationLead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Self-citationOrganic–Inorganic Perovskites: Structural Versatility for Functional Materials Design
Saparov, B., & Mitzi, D. B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00715 · Cited by 2,907
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
National Renewable Energy Laboratory
Karim, S., Faissal, A., & Noureddine, E. B. (2022) · Handbook of Algal Biofuels · doi:10.1016/b978-0-12-823764-9.00006-6 · Cited by 2,558
Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance
Yin, W., Shi, T., & Yan, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306281 · Cited by 2,334
Self-citationAhn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Self-citation
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
A critical review on tin halide perovskite solar cells
Konstantakou, M., & Stergiopoulos, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00929a · Cited by 600
“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells
Ke, W., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Advanced Materials · doi:10.1002/adma.201803230 · Cited by 533
Self-citationMixed‐Organic‐Cation Tin Iodide for Lead‐Free Perovskite Solar Cells with an Efficiency of 8.12%
Zhao, Z., Gu, F., Li, Y., Sun, W., Ye, S., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2017) · Advanced Science · doi:10.1002/advs.201700204 · Cited by 505
The high open-circuit voltage of perovskite solar cells: a review
Guo, Z., Jena, A. K., Kim, G. M., & Miyasaka, T. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00663d · Cited by 430
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Lead-Free Perovskite Materials for Solar Cells
Wang, M., Wang, W., Ma, B., Shen, W., Liu, L., Cao, K., Chen, S., & Huang, W. (2021) · Nano-Micro Letters · doi:10.1007/s40820-020-00578-z · Cited by 423
Enhanced photovoltaic performance and stability with a new type of hollow 3D perovskite {en}FASnI 3
Ke, W., Stoumpos, C. C., Zhu, M., Mao, L., Spanopoulos, I., Liu, J., Kontsevoi, O. Y., Chen, M., Sarma, D., Zhang, Y., et al. (2017) · Science Advances · doi:10.1126/sciadv.1701293 · Cited by 414
Self-citationCao, D. H., Stoumpos, C. C., Yokoyama, T., Logsdon, J. L., Song, T.-B., Farha, O. K., Wasielewski, M. R., Hupp, J. T., & Kanatzidis, M. G. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00202 · Cited by 399
Self-citationSong, T.-B., Yokoyama, T., Aramaki, S., & Kanatzidis, M. G. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00171 · Cited by 352
Self-citationJiang, F., Yang, D., Jiang, Y., Liu, T., Zhao, X., Ming, Y., Luo, B., Qin, F., Fan, J., Han, H., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10739 · Cited by 317
Efficient Lead-Free Solar Cells Based on Hollow {en}MASnI3 Perovskites
Ke, W., Stoumpos, C. C., Spanopoulos, I., Mao, L., Chen, M., Wasielewski, M. R., & Kanatzidis, M. G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09018 · Cited by 301
Self-citationFang, H.-H., Adjokatse, S., Shao, S., Even, J., & Loi, M. A. (2018) · Nature Communications · doi:10.1038/s41467-017-02684-w · Cited by 299
Lead‐Free Hybrid Perovskite Absorbers for Viable Application: Can We Eat the Cake and Have It too?
Liang, L., & Gao, P. (2018) · Advanced Science · doi:10.1002/advs.201700331 · Cited by 291
Gu, F., Ye, S., Zhao, Z., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2018) · Solar RRL · doi:10.1002/solr.201800136 · Cited by 275
Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
Defect activity in metal halide perovskites with wide and narrow bandgap
Zhou, Y., Poli, I., Meggiolaro, D., De Angelis, F., & Petrozza, A. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00331-x · Cited by 275
The architecture of the electron transport layer for a perovskite solar cell
Mohamad Noh, M. F., Teh, C. H., Daik, R., Lim, E. L., Yap, C. C., Ibrahim, M. A., Ahmad Ludin, N., Mohd Yusoff, A. R. B., Jang, J., & Mat Teridi, M. A. (2018) · Journal of Materials Chemistry C · doi:10.1039/c7tc04649a · Cited by 262
Mechanisms and Suppression of Photoinduced Degradation in Perovskite Solar Cells
Wei, J., Wang, Q., Huo, J., Gao, F., Gan, Z., Zhao, Q., & Li, H. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002326 · Cited by 260
Yue, X., Yi, S., Wang, R., Zhang, Z., & Qiu, S. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.03.014 · Cited by 259
Metadata
- Authors
- Ke, W., Stoumpos, C. C., Logsdon, J. L., Wasielewski, M. R., Yan, Y., Fang, G., & Kanatzidis, M. G.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-11-08
- Volume
- 138
- Issue
- 45
- Pages
- 14998-15003
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2536764103
- Cited by
- 254
- References
- 27
- FWCI
- 15.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.