The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.
Colloidal Synthesis of Air-Stable Alloyed CsSn1–xPbxI3 Perovskite Nanocrystals for Use in Solar Cells
Open accessAbstract
Organic–inorganic hybrid perovskite solar cells have demonstrated unprecedented high power conversion efficiencies in the past few years. Now, the universal instability of the perovskites has become the main barrier for this kind of solar cells to realize commercialization. This situation can be even worse for those tin-based perovskites, especially for CsSnI 3, because upon exposure to ambient atmosphere the desired black orthorhombic phase CsSnI 3 would promptly lose single crystallinity and degrade to the inactive yellow phase, followed by irreversible oxidation into metallic Cs 2 SnI 6 . By alloying CsSnI 3 with CsPbI 3, we herein report the synthesis of alloyed perovskite quantum dot (QD), CsSn 1– x Pb x I 3, which not only can be phase-stable for months in purified colloidal solution but also remains intact even directly exposed to ambient air, far superior to both of its parent CsSnI 3 and CsPbI 3 QDs. Ultrafast transient absorption spectroscopy studies reveal that the photoexcited electrons in the alloyed QDs can be injected into TiO 2 nanocrystals at a fast rate of 1.12 × 10 11 s –1, which enables a high photocurrent generation in solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
The Long-Wavelength Edge of Photographic Sensitivity and of the Electronic Absorption of Solids
Urbach, F. (1953) · Physical Review · doi:10.1103/physrev.92.1324 · Cited by 6,047
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Organic–Inorganic Perovskites: Structural Versatility for Functional Materials Design
Saparov, B., & Mitzi, D. B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00715 · Cited by 2,907
Quantum Dot Light‐Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)
Song, J., Li, J., Li, X., Xu, L., Dong, Y., & Zeng, H. (2015) · Advanced Materials · doi:10.1002/adma.201502567 · Cited by 2,896
De Wolf, S., Holovsky, J., Moon, S.-J., Löper, P., Niesen, B., Ledinsky, M., Haug, F.-J., Yum, J.-H., & Ballif, C. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500279b · Cited by 2,851
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Li, Z., Yang, M., Park, J.-S., Wei, S.-H., Berry, J. J., & Zhu, K. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04107 · Cited by 2,269
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Organic-Inorganic Hybrid Materials as Semiconducting Channels in Thin-Film Field-Effect Transistors
Kagan, C. R., Mitzi, D. B., & Dimitrakopoulos, C. D. (1999) · Science · doi:10.1126/science.286.5441.945 · Cited by 2,110
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Efficient luminescent solar cells based on tailored mixed-cation perovskites
Bi, D., Tress, W., Dar, M. I., Gao, P., Luo, J., Renevier, C., Schenk, K., Abate, A., Giordano, F., Correa Baena, J.-P., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501170 · Cited by 1,864
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
All-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Sutherland, B. R., & Sargent, E. H. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.62 · Cited by 1,730
Bandgap‐Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells
Sutton, R. J., Eperon, G. E., Miranda, L., Parrott, E. S., Kamino, B. A., Patel, J. B., Hörantner, M. T., Johnston, M. B., Haghighirad, A. A., Moore, D. T., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502458 · Cited by 1,571
Colloidal-quantum-dot photovoltaics using atomic-ligand passivation
Tang, J., Kemp, K. W., Hoogland, S., Jeong, K. S., Liu, H., Levina, L., Furukawa, M., Wang, X., Debnath, R., Cha, D., et al. (2011) · Nature Materials · doi:10.1038/nmat3118 · Cited by 1,569
Hao, F., Stoumpos, C. C., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5033259 · Cited by 1,501
Bismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application
Park, B., Philippe, B., Zhang, X., Rensmo, H., Boschloo, G., & Johansson, E. M. J. (2015) · Advanced Materials · doi:10.1002/adma.201501978 · Cited by 1,269
Lead‐Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation
Kumar, M. H., Dharani, S., Leong, W. L., Boix, P. P., Prabhakar, R. R., Baikie, T., Shi, C., Ding, H., Ramesh, R., Asta, M., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401991 · Cited by 1,209
Chung, I., Song, J.-H., Im, J., Androulakis, J., Malliakas, C. D., Li, H., Freeman, A. J., Kenney, J. T., & Kanatzidis, M. G. (2012) · Journal of the American Chemical Society · doi:10.1021/ja301539s · Cited by 1,203
Two‐Inch‐Sized Perovskite CH3NH3PbX3 (X = Cl, Br, I) Crystals: Growth and Characterization
Liu, Y., Yang, Z., Cui, D., Ren, X., Sun, J., Liu, X., Zhang, J., Wei, Q., Fan, H., Yu, F., et al. (2015) · Advanced Materials · doi:10.1002/adma.201502597 · Cited by 1,123
Conducting tin halides with a layered organic-based perovskite structure
Mitzi, D. B., Feild, C. A., Harrison, W. T. A., & Guloy, A. M. (1994) · Nature · doi:10.1038/369467a0 · Cited by 1,100
All-inorganic cesium lead halide perovskite nanocrystals for photodetector applications
Ramasamy, P., Lim, D.-H., Kim, B., Lee, S.-H., Lee, M.-S., & Lee, J.-S. (2016) · Chemical Communications · doi:10.1039/c5cc08643d · Cited by 1,082
Synthesis and Optical Properties of Lead-Free Cesium Tin Halide Perovskite Nanocrystals
Jellicoe, T. C., Richter, J. M., Glass, H. F. J., Tabachnyk, M., Brady, R., Dutton, S. E., Rao, A., Friend, R. H., Credgington, D., Greenham, N. C., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13470 · Cited by 998
Mn-Doped Quantum Dot Sensitized Solar Cells: A Strategy to Boost Efficiency over 5%
Santra, P. K., & Kamat, P. V. (2012) · Journal of the American Chemical Society · doi:10.1021/ja211224s · Cited by 979
CH3NH3SnxPb(1–x)I3 Perovskite Solar Cells Covering up to 1060 nm
Ogomi, Y., Morita, A., Tsukamoto, S., Saitho, T., Fujikawa, N., Shen, Q., Toyoda, T., Yoshino, K., Pandey, S. S., Ma, T., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5002117 · Cited by 978
Self-citationDualeh, A., Tétreault, N., Moehl, T., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304022 · Cited by 967
Liu, F., Zhang, Y., Ding, C., Kobayashi, S., Izuishi, T., Nakazawa, N., Toyoda, T., Ohta, T., Hayase, S., Minemoto, T., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b05442 · Cited by 960
Self-citationQuantum‐Dot‐Sensitized Solar Cells
Rühle, S., Shalom, M., & Zaban, A. (2010) · ChemPhysChem · doi:10.1002/cphc.201000069 · Cited by 924
Zhang, W., Saliba, M., Moore, D. T., Pathak, S. K., Hörantner, M. T., Stergiopoulos, T., Stranks, S. D., Eperon, G. E., Alexander-Webber, J. A., Abate, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms7142 · Cited by 920
Liao, Y., Liu, H., Zhou, W., Yang, D., Shang, Y., Shi, Z., Li, B., Jiang, X., Zhang, L., Quan, L. N., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01815 · Cited by 877
Thin-Film Preparation and Characterization of Cs3Sb2I9: A Lead-Free Layered Perovskite Semiconductor
Saparov, B., Hong, F., Sun, J.-P., Duan, H.-S., Meng, W., Cameron, S., Hill, I. G., Yan, Y., & Mitzi, D. B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01989 · Cited by 812
Recombination in Quantum Dot Sensitized Solar Cells
Mora-Seró, I., Giménez, S., Fabregat-Santiago, F., Gómez, R., Shen, Q., Toyoda, T., & Bisquert, J. (2009) · Accounts of Chemical Research · doi:10.1021/ar900134d · Cited by 783
Self-citationQuantum Dot Sensitization of Organic−Inorganic Hybrid Solar Cells
Plass, R., Pelet, S., Krueger, J., Grätzel, M., & Bach, U. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp020453l · Cited by 749
Alloyed ZnxCd1-xS Nanocrystals with Highly Narrow Luminescence Spectral Width
Zhong, X., Feng, Y., Knoll, W., & Han, M. (2003) · Journal of the American Chemical Society · doi:10.1021/ja036683a · Cited by 676
Enhanced stability and efficiency in hole-transport-layer-free CsSnI3 perovskite photovoltaics
Marshall, K. P., Walker, M., Walton, R. I., & Hatton, R. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.178 · Cited by 644
Modeling High-Efficiency Quantum Dot Sensitized Solar Cells
González-Pedro, V., Xu, X., Mora-Seró, I., & Bisquert, J. (2010) · ACS Nano · doi:10.1021/nn101534y · Cited by 631
Zn–Cu–In–Se Quantum Dot Solar Cells with a Certified Power Conversion Efficiency of 11.6%
Du, J., Du, Z., Hu, J.-S., Pan, Z., Shen, Q., Sun, J., Long, D., Dong, H., Sun, L., Zhong, X., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00615 · Cited by 612
Self-citationUltrafast Interfacial Electron and Hole Transfer from CsPbBr3 Perovskite Quantum Dots
Wu, K., Liang, G., Shang, Q., Ren, Y., Kong, D., & Lian, T. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08520 · Cited by 588
Electron Injection from Colloidal PbS Quantum Dots into Titanium Dioxide Nanoparticles
Hyun, B.-R., Zhong, Y.-W., Bartnik, A. C., Sun, L., Abruña, H. D., Wise, F. W., Goodreau, J. D., Matthews, J. R., Leslie, T. M., & Borrelli, N. F. (2008) · ACS Nano · doi:10.1021/nn800336b · Cited by 578
Lead-Free MA2CuClxBr4–x Hybrid Perovskites
Cortecchia, D., Dewi, H. A., Yin, J., Bruno, A., Chen, S., Baikie, T., Boix, P. P., Grätzel, M., Mhaisalkar, S., Soci, C., et al. (2016) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b01896 · Cited by 574
High-Performance Nanostructured Inorganic−Organic Heterojunction Solar Cells
Chang, J. A., Rhee, J. H., Im, S. H., Lee, Y. H., Kim, H.-J., Seok, S. I., Nazeeruddin, M. K., & Gratzel, M. (2010) · Nano Letters · doi:10.1021/nl101322h · Cited by 565
Composition-Tunable ZnxCd1-xSe Nanocrystals with High Luminescence and Stability
Zhong, X., Han, M., Dong, Z., White, T. J., & Knoll, W. (2003) · Journal of the American Chemical Society · doi:10.1021/ja035096m · Cited by 555
Liang, J., Zhao, P., Wang, C., Wang, Y., Hu, Y., Zhu, G., Ma, L., Liu, J., & Jin, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07949 · Cited by 529
Composition-Tunable Alloyed Semiconductor Nanocrystals
Regulacio, M. D., & Han, M.-Y. (2010) · Accounts of Chemical Research · doi:10.1021/ar900242r · Cited by 404
Improving the performance of colloidal quantum-dot-sensitized solar cells
Giménez, S., Mora-Seró, I., Macor, L., Guijarro, N., Lana-Villarreal, T., Gómez, R., Diguna, L. J., Shen, Q., Toyoda, T., & Bisquert, J. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/29/295204 · Cited by 404
Self-citationChen, C., Lin, H., Chiang, K., Tsai, W., Huang, Y., Tsao, C., & Lin, H. (2017) · Advanced Materials · doi:10.1002/adma.201605290 · Cited by 395
Pan, Z., Zhao, K., Wang, J., Zhang, H., Feng, Y., & Zhong, X. (2013) · ACS Nano · doi:10.1021/nn400947e · Cited by 387
Hoffman, J. B., Schleper, A. L., & Kamat, P. V. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04661 · Cited by 371
Fluorescent Alloy CsPbxMn1–xI3 Perovskite Nanocrystals with High Structural and Optical Stability
Akkerman, Q. A., Meggiolaro, D., Dang, Z., De Angelis, F., & Manna, L. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00707 · Cited by 368
Stable Low‐Bandgap Pb–Sn Binary Perovskites for Tandem Solar Cells
Yang, Z., Rajagopal, A., Chueh, C., Jo, S. B., Liu, B., Zhao, T., & Jen, A. K. ‐. (2016) · Advanced Materials · doi:10.1002/adma.201602696 · Cited by 367
Chen, L.-J., Lee, C.-R., Chuang, Y.-J., Wu, Z.-H., & Chen, C. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02344 · Cited by 361
Gupta, S., Bendikov, T., Hodes, G., & Cahen, D. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00402 · Cited by 351
CdSe Quantum Dot-Sensitized TiO2 Electrodes: Effect of Quantum Dot Coverage and Mode of Attachment
Guijarro, N., Lana-Villarreal, T., Mora-Seró, I., Bisquert, J., & Gómez, R. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp808091d · Cited by 342
Xu, P., Chen, S., Xiang, H.-J., Gong, X.-G., & Wei, S.-H. (2014) · Chemistry of Materials · doi:10.1021/cm503122j · Cited by 338
Shalvoy, R. B., Fisher, G. B., & Stiles, P. J. (1977) · Physical Review B · doi:10.1103/physrevb.15.1680 · Cited by 293
Enhanced Mobility-Lifetime Products in PbS Colloidal Quantum Dot Photovoltaics
Jeong, K. S., Tang, J., Liu, H., Kim, J., Schaefer, A. W., Kemp, K., Levina, L., Wang, X., Hoogland, S., Debnath, R., et al. (2012) · ACS Nano · doi:10.1021/nn2039164 · Cited by 286
Im, S. H., Lim, C.-S., Chang, J. A., Lee, Y. H., Maiti, N., Kim, H.-J., Nazeeruddin, M. K., Grätzel, M., & Seok, S. I. (2011) · Nano Letters · doi:10.1021/nl2026184 · Cited by 269
Solution‐Processed Tin‐Based Perovskite for Near‐Infrared Lasing
Xing, G., Kumar, M. H., Chong, W. K., Liu, X., Cai, Y., Ding, H., Asta, M., Grätzel, M., Mhaisalkar, S., Mathews, N., et al. (2016) · Advanced Materials · doi:10.1002/adma.201601418 · Cited by 269
Engineering InAsxP1-x/InP/ZnSe III−V Alloyed Core/Shell Quantum Dots for the Near-Infrared
Kim, S.-W., Zimmer, J. P., Ohnishi, S., Tracy, J. B., Frangioni, J. V., & Bawendi, M. G. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0434331 · Cited by 242
Lin, S.-C., Lee, Y.-L., Chang, C.-H., Shen, Y.-J., & Yang, Y.-M. (2007) · Applied Physics Letters · doi:10.1063/1.2721373 · Cited by 231
Preparation of metal-polymer dispersions by plasma techniques. An ESCA investigation
Shuttleworth, D. (1980) · The Journal of Physical Chemistry · doi:10.1021/j100449a038 · Cited by 211
Synthesis and characterization of CsSnI3 thin films
Shum, K., Chen, Z., Qureshi, J., et al. (2010) · Applied Physics Letters · doi:10.1063/1.3442511 · Cited by 190
Tolbert, S. H., Herhold, A. B., Johnson, C. S., & Alivisatos, A. P. (1994) · Physical Review Letters · doi:10.1103/physrevlett.73.3266 · Cited by 139
Kontos, A. G., Kaltzoglou, A., Siranidi, E., Palles, D., Angeli, G. K., Arfanis, M. K., Psycharis, V., Raptis, Y. S., Kamitsos, E. I., Trikalitis, P. N., et al. (2016) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.6b02318 · Cited by 135
Feng, H., Paudel, T. R., Tsymbal, E. Y., & Zeng, X. C. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04015 · Cited by 133
B-Site Metal Cation Exchange in Halide Perovskites
Eperon, G. E., & Ginger, D. S. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00290 · Cited by 130
Li, T., Huo, Z., Ding, Y., Li, Y., Dai, S., Wang, L., Zhu, J., Pan, X., Zhang, B., Yao, J., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta06188h · Cited by 106
Self-citationShen, Q., Ogomi, Y., Chang, J., Tsukamoto, S., Kukihara, K., Oshima, T., Osada, N., Yoshino, K., Katayama, K., Toyoda, T., et al. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp03073g · Cited by 94
Self-citationInterplay between Iodide and Tin Vacancies in CsSnI3 Perovskite Solar Cells
Kumar, G. R., Kim, H., Karupannan, S., & Prabakar, K. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06278 · Cited by 78
Zhang, Y., Ding, C., Wu, G., Nakazawa, N., Chang, J., Ogomi, Y., Toyoda, T., Hayase, S., Katayama, K., & Shen, Q. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b10920 · Cited by 53
Self-citationLiu, F., Zhu, J., Wei, J., Li, Y., Hu, L., Huang, Y., Takuya, O., Shen, Q., Toyoda, T., Zhang, B., et al. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp410599q · Cited by 44
Self-citationQuantum-Dot-Sensitized Solar Cells with Water-Soluble and Air-Stable PbS Quantum Dots
Jumabekov, A. N., Deschler, F., Böhm, D., Peter, L. M., Feldmann, J., & Bein, T. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp4110773 · Cited by 32
Heo, J. H., Jang, M. H., Lee, M. H., et al. (2017) · RSC Advances · doi:10.1039/c6ra25637f · Cited by 14
Cited by
Shamsi, J., Urban, A. S., Imran, M., De Trizio, L., & Manna, L. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00644 · Cited by 1,813
State of the Art and Prospects for Halide Perovskite Nanocrystals
Dey, A., Ye, J., De, A., Debroye, E., Ha, S. K., Bladt, E., Kshirsagar, A. S., Wang, Z., Yin, J., Wang, Y., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c08903 · Cited by 1,478
Self-citationWei, Y., Cheng, Z., & Lin, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00740c · Cited by 1,206
Chemical stability and instability of inorganic halide perovskites
Zhou, Y., & Zhao, Y. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03559h · Cited by 784
Bifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics
Wang, Y., Zhang, T., Kan, M., & Zhao, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b07927 · Cited by 690
Metadata
- Authors
- Liu, F., Ding, C., Zhang, Y., Ripolles, T. S., Kamisaka, T., Toyoda, T., Hayase, S., Minemoto, T., Yoshino, K., Dai, S., Yanagida, M., Noguchi, H., & Shen, Q.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-11-13
- Volume
- 139
- Issue
- 46
- Pages
- 16708-16719
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2765947376
- Cited by
- 385
- References
- 79
- FWCI
- 17.34
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.