The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Two-Dimensional Ruddlesden–Popper Perovskite with Nanorod-like Morphology for Solar Cells with Efficiency Exceeding 15%
Abstract
Abstract Two-dimensional (2D) Ruddlesden–Popper perovskites have shown great potential for application in perovskite solar cells due to their appealing environmental stability. However, 2D perovskites generally show poor photovoltaic performance. Here, a new type of 2D perovskite using 2-thiophenemethylammonium (ThMA+) as a spacer cation was developed and high photovoltaic performance as well as enhanced stability in comparison with its 3D counterpart was demonstrated. The use of the 2D perovskite (ThMA)2(MA)n−1PbnI3n+1 (n = 3) in deposited highly oriented thin films from N,N-dimethylformamide using a methylammonium chloride (MACl) assisted film-forming technique dramatically improves the efficiency of 2D perovskite photovoltaic devices from 1.74% to over 15%, which is the highest efficiency for 2D perovskite (n < 6) solar cells so far. The enhanced performance of the 2D perovskite devices using MACl as additive is ascribed to the growth of a dense web of nanorod-like film with near-single-crystalline quality, in which the crystallographic planes of the 2D MAn–1PbnI3n+12– slabs preferentially aligned perpendicular to the substrate, thus facilitating efficient charge transport. This work provides a new insight into exploration of the formation mechanism of 2D perovskites with increased crystallinity and crystal orientation suitable for high-performance solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Self-citationHigh-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Cited by
Two-Dimensional Hybrid Halide Perovskites: Principles and Promises
Mao, L., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10851 · Cited by 1,584
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Quantum and Dielectric Confinement Effects in Lower-Dimensional Hybrid Perovskite Semiconductors
Katan, C., Mercier, N., & Even, J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00417 · Cited by 864
Additive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Advances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
Ren, H., Yu, S., Chao, L., Xia, Y., Sun, Y., Zuo, S., Li, F., Niu, T., Yang, Y., Ju, H., et al. (2020) · Nature Photonics · doi:10.1038/s41566-019-0572-6 · Cited by 578
Self-citationDunfield, S. P., Bliss, L., Zhang, F., Luther, J. M., Zhu, K., van Hest, M. F. A. M., Reese, M. O., & Berry, J. J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904054 · Cited by 435
Enhanced Charge Transport in 2D Perovskites via Fluorination of Organic Cation
Zhang, F., Kim, D. H., Lu, H., Park, J.-S., Larson, B. W., Hu, J., Gao, L., Xiao, C., Reid, O. G., Chen, X., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00972 · Cited by 382
Over 21% Efficiency Stable 2D Perovskite Solar Cells
Shao, M., Bie, T., Yang, L., Gao, Y., Jin, X., He, F., Zheng, N., Yu, Y., & Zhang, X. (2022) · Advanced Materials · doi:10.1002/adma.202107211 · Cited by 316
Self-citationHu, J., Oswald, I. W. H., Stuard, S. J., Nahid, M. M., Zhou, N., Williams, O. F., Guo, Z., Yan, L., Hu, H., Chen, Z., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08980-x · Cited by 308
Zhou, Q., Liang, L., Hu, J., Cao, B., Yang, L., Wu, T., Li, X., Zhang, B., & Gao, P. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802595 · Cited by 294
High‐Quality Ruddlesden–Popper Perovskite Film Formation for High‐Performance Perovskite Solar Cells
Liu, P., Han, N., Wang, W., Ran, R., Zhou, W., & Shao, Z. (2021) · Advanced Materials · doi:10.1002/adma.202002582 · Cited by 294
Two‐Dimensional Halide Perovskites in Solar Cells: 2D or not 2D?
Ortiz‐Cervantes, C., Carmona‐Monroy, P., & Solis‐Ibarra, D. (2019) · ChemSusChem · doi:10.1002/cssc.201802992 · Cited by 287
Shi, J., Gao, Y., Gao, X., Zhang, Y., Zhang, J., Jing, X., & Shao, M. (2019) · Advanced Materials · doi:10.1002/adma.201901673 · Cited by 286
Highly Efficient and Stable Solar Cells Based on Crystalline Oriented 2D/3D Hybrid Perovskite
Zhou, T., Lai, H., Liu, T., Lu, D., Wan, X., Zhang, X., Liu, Y., & Chen, Y. (2019) · Advanced Materials · doi:10.1002/adma.201901242 · Cited by 272
Self-citationKe, W., Mao, L., Stoumpos, C. C., Hoffman, J., Spanopoulos, I., Mohite, A. D., & Kanatzidis, M. G. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803384 · Cited by 269
Metadata
- Authors
- Lai, H., Kan, B., Liu, T., Zheng, N., Xie, Z., Zhou, T., Wan, X., Zhang, X., Liu, Y., & Chen, Y.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-08-29
- Volume
- 140
- Issue
- 37
- Pages
- 11639-11646
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2889518219
- Cited by
- 477
- References
- 42
- FWCI
- 24.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.