Modeling Carbon Dioxide Adsorption on Microporous Substrates: Comparison between Cu-BTC Metal−Organic Framework and 13X Zeolitic Molecular Sieve
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In this work, CO 2 adsorption on a laboratory-synthesized polymeric copper(II) benzene-1,3,5-tricarboxylate (Cu-BTC) metal−organic framework was modeled by means of the semiempirical Sips equation in order to obtain parameters of engineering interest. Produced Cu-BTC samples were characterized by X-ray diffraction, thermogravimetry, and microporosimetric analysis; high crystallinity and very high specific surface area and pore volume were found. CO 2 adsorption isotherms on Cu-BTC were evaluated at T = (283, 293, 318, and 343) K for p ≤ 1 bar by means of a volumetric technique. In order to establish a comparison, CO 2 adsorption isotherms on samples of commercial 13X zeolite were determined under the same experimental conditions and then modeled in the same way as those for Cu-BTC. The modeling and experimental results indicated that relative to 13X zeolite, Cu-BTC showed higher CO 2 adsorption capacities at near-ambient temperature and a lower heat release during the adsorption phase.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
On the Structure of a Catalyst Surface
Sips, R. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746922 · Cited by 3,650
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Cited by
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Progress in adsorption-based CO2capture by metal–organic frameworks
Liu, J., Thallapally, P. K., McGrail, B. P., Brown, D. R., & Liu, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15221a · Cited by 1,339
Mason, J. A., Sumida, K., Herm, Z. R., Krishna, R., & Long, J. R. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01720a · Cited by 1,072
CO2 Capture and Separations Using MOFs: Computational and Experimental Studies
Yu, J., Xie, L.-H., Li, J.-R., Ma, Y., Seminario, J. M., & Balbuena, P. B. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00626 · Cited by 1,047
Microporous metal-organic framework with potential for carbon dioxide capture at ambient conditions
Xiang, S., He, Y., Zhang, Z., Wu, H., Zhou, W., Krishna, R., & Chen, B. (2012) · Nature Communications · doi:10.1038/ncomms1956 · Cited by 875
Perspective of microporous metal–organic frameworks for CO2capture and separation
Zhang, Z., Yao, Z.-Z., Xiang, S., & Chen, B. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00143e · Cited by 767
Direct Air Capture of CO2 by Physisorbent Materials
Kumar, A., Madden, D. G., Lusi, M., Chen, K., Daniels, E. A., Curtin, T., Perry, J. J., & Zaworotko, M. J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506952 · Cited by 588
Metal–organic frameworks for upgrading biogas via CO2 adsorption to biogas green energy
Chaemchuen, S., Kabir, N. A., Zhou, K., & Verpoort, F. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60244c · Cited by 416
Lee, W. R., Hwang, S. Y., Ryu, D. W., Lim, K. S., Han, S. S., Moon, D., Choi, J., & Hong, C. S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42328j · Cited by 329
Saha, D., Grappe, H. A., Chakraborty, A., & Orkoulas, G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00745 · Cited by 316
An ultra-tunable platform for molecular engineering of high-performance crystalline porous materials
Zhai, Q.-G., Bu, X., Mao, C., Zhao, X., Daemen, L., Cheng, Y., Ramirez-Cuesta, A. J., & Feng, P. (2016) · Nature Communications · doi:10.1038/ncomms13645 · Cited by 279
Du, T., Fang, X., Liu, L., Shang, J., Zhang, B., Wei, Y., Gong, H., Rahman, S., May, E. F., Webley, P. A., et al. (2018) · Chemical Communications · doi:10.1039/c8cc00634b · Cited by 60
Metadata
- Authors
- Aprea, P., Caputo, D., Gargiulo, N., Iucolano, F., & Pepe, F.
- Venue
- Journal of Chemical & Engineering Data
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-07-19
- Volume
- 55
- Issue
- 9
- Pages
- 3655-3661
- ISSN
- 0021-9568 (ISSN-L)
- 1520-5134
- OpenAlex
- W2082846892
- Cited by
- 139
- References
- 2
- FWCI
- 17.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.