The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Diamine-functionalized metal–organic framework: exceptionally high CO2capacities from ambient air and flue gas, ultrafast CO2uptake rate, and adsorption mechanism
Abstract
A framework en-Mg2(dobpdc) (1-en; en = ethylenediamine) functionalized with the primary amine en was prepared via postmodification. From synchrotron PXRD data, it is revealed that the cell parameters change upon grafting of en and CO2 uptake. The adsorbed CO2 amount of 1-en is 4.57 mmol g−1 (16.7 wt%) at 25 °C and 1 bar and decreases to 3.00 mmol g−1 (11.7 wt%) at 150 °C. Noticeably, 1-en shows a significant CO2 uptake (3.62 mmol g−1, 13.7 wt%) at 0.15 bar, which is comparable to the CO2 partial pressure of a post-combustion flue gas. The CO2 capacity of 1-en at 0.39 mbar, close to atmospheric CO2 concentration, is 2.83 mmol g−1 (11.1 wt%), which marks the highest amount among MOFs. The isosteric heat of adsorption (−Qst) of 1-en in CO2 capture corresponds to 49–51 kJ mol−1, which is supported by DFT calculations (−52.8 kJ mol−1). These results suggest that the adsorption of CO2 onto the free amines of en leads to the formation of a carbamic acid. Adsorption–desorption cyclings of CO2 at the real dilute concentrations of air and flue gas are established with almost retaining CO2 capacities, which could provide superior potential for practical application in CO2 capture. The adsorption rate of CO2 in 1-en exceeds that in some other tested porous materials. The recyclability in CO2 uptake for 1-en is maintained even after exposure to humidity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal–Organic Framework Materials as Chemical Sensors
Kreno, L. E., Leong, K., Farha, O. K., Allendorf, M., Van Duyne, R. P., & Hupp, J. T. (2012) · Chemical Reviews · doi:10.1021/cr200324t · Cited by 7,136
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Hydrogen Storage in Metal–Organic Frameworks
Suh, M. P., Park, H. J., Prasad, T. K., & Lim, D.-W. (2012) · Chemical Reviews · doi:10.1021/cr200274s · Cited by 3,689
Homochiral Metal–Organic Frameworks for Asymmetric Heterogeneous Catalysis
Yoon, M., Srirambalaji, R., & Kim, K. (2012) · Chemical Reviews · doi:10.1021/cr2003147 · Cited by 2,856
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Postsynthetic Methods for the Functionalization of Metal–Organic Frameworks
Cohen, S. M. (2012) · Chemical Reviews · doi:10.1021/cr200179u · Cited by 2,336
O’Keeffe, M., & Yaghi, O. M. (2012) · Chemical Reviews · doi:10.1021/cr200205j · Cited by 2,143
Large-Pore Apertures in a Series of Metal-Organic Frameworks
Deng, H., Grunder, S., Cordova, K. E., Valente, C., Furukawa, H., Hmadeh, M., Gándara, F., Whalley, A. C., Liu, Z., Asahina, S., et al. (2012) · Science · doi:10.1126/science.1220131 · Cited by 2,126
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Sorbents for the Direct Capture of CO 2 from Ambient Air
Shi, X., Xiao, H., Azarabadi, H., Song, J., Wu, X., Chen, X., & Lackner, K. S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201906756 · Cited by 679
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Carbon Capture From Flue Gas and the Atmosphere: A Perspective
Wang, X., & Song, C. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.560849 · Cited by 428
Metadata
- Authors
- Lee, W. R., Hwang, S. Y., Ryu, D. W., Lim, K. S., Han, S. S., Moon, D., Choi, J., & Hong, C. S.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 7
- Issue
- 2
- Pages
- 744-751
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2026972799
- Cited by
- 329
- References
- 45
- FWCI
- 23.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Diamine-functionalized metal–organic framework: exceptionally high CO2capacities from ambient air and flue gas, ultrafast CO2uptake rate, and adsorption mechanism. https://app.cochat.ai/papers/10.1039/c3ee42328j
- The paper
- Lee, W. R., Hwang, S. Y., Ryu, D. W., Lim, K. S., Han, S. S., Moon, D., Choi, J., & Hong, C. S. (2014). Diamine-functionalized metal–organic framework: exceptionally high CO2capacities from ambient air and flue gas, ultrafast CO2uptake rate, and adsorption mechanism. Energy Environ. Sci. https://doi.org/10.1039/c3ee42328j
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
