Preparation of PtAu Alloy Colloids by Laser Ablation in Solution and Their Characterization
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Stable PtAu alloy colloids with a wide range of compositions were prepared using pulsed laser ablation on single metal-mixture targets in water. The concentration of Pt in the alloys can be tuned by varying the Pt/Au ratio in the targets, which are made by compression molding a mixture of Pt and Au powders at different ratios. Such fabricated PtAu alloy nanoparticles (NPs) show a face-centered cubic structure, and their composition basically follows that of their corresponding targets. The effect of aqueous solution pH and ablating laser fluence on the formation and structure of alloy NPs was further investigated. It is found that PtAu alloy colloids of identical composition can be achieved over a pH range extending from 4.0 to 11.0 and at fluences varying from 4 to 150 J cm –2 as long as the targets of the same composition are used. This finding suggests that alloy formation is essentially insensitive to both factors in certain ranges, and the method developed herein for the alloy NP formation is quite robust. Moreover, the surface composition, estimated from electrochemical measurements, is identical to the overall composition of the NPs estimated from Vegard’s law and X-ray diffraction data, which is a strong indication of the uniform composition on the surface and in the interior of these alloy NPs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tian, N., Zhou, Z.-Y., Sun, S.-G., Ding, Y., & Wang, Z. L. (2007) · Science · doi:10.1126/science.1140484 · Cited by 3,073
Stabilization of Platinum Oxygen-Reduction Electrocatalysts Using Gold Clusters
Zhang, J., Sasaki, K., Sutter, E., & Adzic, R. R. (2007) · Science · doi:10.1126/science.1134569 · Cited by 1,779
Self-citationLaser ablation in liquids: Applications in the synthesis of nanocrystals
Yang, G. W. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.10.016 · Cited by 1,055
Synthesis of colloidal nanoparticles during femtosecond laser ablation of gold in water
Kabashin, A. V., & Meunier, M. (2003) · Journal of Applied Physics · doi:10.1063/1.1626793 · Cited by 568
Stabilization and Size Control of Gold Nanoparticles during Laser Ablation in Aqueous Cyclodextrins
Sylvestre, J.-P., Kabashin, A. V., Sacher, E., Meunier, M., & Luong, J. H. T. (2004) · Journal of the American Chemical Society · doi:10.1021/ja048678s · Cited by 369
Formation of Stable Platinum Nanoparticles by Laser Ablation in Water
Mafuné, F., Kohno, J.-Y., Takeda, Y., & Kondow, T. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp021580k · Cited by 265
Wanjala, B. N., Luo, J., Loukrakpam, R., Fang, B., Mott, D., Njoki, P. N., Engelhard, M., Naslund, H. R., Wu, J. K., Wang, L., et al. (2010) · Chemistry of Materials · doi:10.1021/cm101109e · Cited by 226
Hernández-Fernández, P., Rojas, S., Ocón, P., Gómez de la Fuente, J. L., San Fabián, J., Sanza, J., Peña, M. A., García-García, F. J., Terreros, P., & Fierro, J. L. G. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp066812k · Cited by 174
Laser ablation of a platinum target in water. II. Ablation rate and nanoparticle size distributions
Nichols, W. T., Sasaki, T., & Koshizaki, N. (2006) · Journal of Applied Physics · doi:10.1063/1.2390641 · Cited by 122
Laser ablation of a platinum target in water. III. Laser-induced reactions
Nichols, W. T., Sasaki, T., & Koshizaki, N. (2006) · Journal of Applied Physics · doi:10.1063/1.2390642 · Cited by 105
Cited by
Laser Synthesis and Processing of Colloids: Fundamentals and Applications
Zhang, D., Gökce, B., & Barcikowski, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00468 · Cited by 1,344
Amendola, V., & Meneghetti, M. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42895d · Cited by 758
Pfeiffer, C., Rehbock, C., Hühn, D., Carrillo-Carrion, C., de Aberasturi, D. J., Merk, V., Barcikowski, S., & Parak, W. J. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2013.0931 · Cited by 378
Kinetically-controlled laser-synthesis of colloidal high-entropy alloy nanoparticles
Waag, F., Li, Y., Ziefuß, A. R., Bertin, E., Kamp, M., Duppel, V., Marzun, G., Kienle, L., Barcikowski, S., & Gökce, B. (2019) · RSC Advances · doi:10.1039/c9ra03254a · Cited by 273
Pulsed laser ablation based synthesis of colloidal metal nanoparticles for catalytic applications
Zhang, J., Chaker, M., & Ma, D. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.07.050 · Cited by 264
“alloy targets are not available for all desired component ratios due to the miscibility gap of certain metals, such as Pt and Au [7].”
BackgroundSelf-citation
Metadata
- Authors
- Zhang, J., Oko, D. N., Garbarino, S., Imbeault, R., Chaker, M., Tavares, A. C., Guay, D., & Ma, D.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-06-07
- Volume
- 116
- Issue
- 24
- Pages
- 13413-13420
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2328669682
- Cited by
- 104
- References
- 10
- FWCI
- 4.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation of PtAu Alloy Colloids by Laser Ablation in Solution and Their Characterization. https://app.cochat.ai/papers/10.1021/jp302485g
- The paper
- Zhang, J., Oko, D. N., Garbarino, S., Imbeault, R., Chaker, M., Tavares, A. C., Guay, D., & Ma, D. (2012). Preparation of PtAu Alloy Colloids by Laser Ablation in Solution and Their Characterization. The Journal of Physical Chemistry C. https://doi.org/10.1021/jp302485g
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.