The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Ultralong α-MoO3 Nanobelts: Synthesis and Effect of Binder Choice on Their Lithium Storage Properties
Abstract
Ultralong α-MoO 3 nanobelts with an average length of 200–300 μm and uniform width of around 0.6–1.5 μm have been synthesized by a facile hydrothermal method using a molybdenum organic salt precursor. When evaluated for their lithium storage properties, the composite electrodes made from these nanobelts and bioderived polymer binders containing carboxy groups exhibit much better electrochemical performance than that composed of conventional poly(vinylidene fluoride) (PVDF) binder. Remarkably, the electrodes using sodium carboxymethyl cellulose (Na-CMC) binder can deliver the high specific capacity of over 730 mA h g –1 for over 200 cycles at a 0.2 C rate. Even cycled at high rates of 1–2 C, high capacities of around 430–650 mA h g –1 can be still retained. The positive effect of this type of binder on the electrode properties of α-MoO 3 nanobelts is further evidenced by using another bioderived binder, the sodium alginate (Na-alginate). Stable capacity retention of around 800 mA h g –1 for over 150 cycles at 0.2 C well-demonstrates that the choice of binder can greatly influence the electrochemical performance of metal oxide electrodes, especially those suffering from large volume expansion upon lithium intake.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
Nanostructured Materials for Electrochemical Energy Conversion and Storage Devices
Guo, Y., Hu, J., & Wan, L. (2008) · Advanced Materials · doi:10.1002/adma.200800627 · Cited by 2,223
A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries
Kovalenko, I., Zdyrko, B., Magasinski, A., Hertzberg, B., Milicev, Z., Burtovyy, R., Luzinov, I., & Yushin, G. (2011) · Science · doi:10.1126/science.1209150 · Cited by 1,802
Functional Materials for Rechargeable Batteries
Cheng, F., Liang, J., Tao, Z., & Chen, J. (2011) · Advanced Materials · doi:10.1002/adma.201003587 · Cited by 1,609
Metal Oxide Hollow Nanostructures for Lithium‐ion Batteries
Wang, Z., Zhou, L., & (David) Lou, X. W. (2012) · Advanced Materials · doi:10.1002/adma.201200469 · Cited by 1,506
Self-citationWang, Z., Luan, D., Madhavi, S., Hu, Y., & Lou, X. W. (. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02831f · Cited by 780
Self-citationLithiated MoO3 Nanobelts with Greatly Improved Performance for Lithium Batteries
Mai, L. Q., Hu, B., Chen, W., Qi, Y. Y., Lao, C. S., Yang, R. S., Dai, Y., & Wang, Z. L. (2007) · Advanced Materials · doi:10.1002/adma.200700883 · Cited by 588
Self-citationKey Parameters Governing the Reversibility of Si/Carbon/CMC Electrodes for Li-Ion Batteries
Bridel, J.-S., Azaïs, T., Morcrette, M., Tarascon, J.-M., & Larcher, D. (2010) · Chemistry of Materials · doi:10.1021/cm902688w · Cited by 499
Liu, H., Wang, G., Liu, J., Qiao, S., & Ahn, H. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03132a · Cited by 455
Hochgatterer, N. S., Schweiger, M. R., Koller, S., Raimann, P. R., Wöhrle, T., Wurm, C., & Winter, M. (2008) · Electrochemical and Solid-State Letters · doi:10.1149/1.2888173 · Cited by 449
Hydrothermal Synthesis of α-MoO3Nanorods via Acidification of Ammonium Heptamolybdate Tetrahydrate
Lou, X. W., & Zeng, H. C. (2002) · Chemistry of Materials · doi:10.1021/cm0206237 · Cited by 377
Self-citationReversible Lithium‐Ion Insertion in Molybdenum Oxide Nanoparticles
Lee, S., Kim, Y., Deshpande, R., Parilla, P. A., Whitney, E., Gillaspie, D. T., Jones, K. M., Mahan, A. H., Zhang, S., & Dillon, A. C. (2008) · Advanced Materials · doi:10.1002/adma.200800999 · Cited by 343
Li, W., Cheng, F., Tao, Z., & Chen, J. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0553784 · Cited by 217
Carbon-coated MoO3 nanobelts as anode materials for lithium-ion batteries
Hassan, M. F., Guo, Z. P., Chen, Z., & Liu, H. K. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.065 · Cited by 199
Lithium Intercalation Cells Without Metallic Lithium: and
Auborn, J. J., & Barberio, Y. L. (1987) · Journal of The Electrochemical Society · doi:10.1149/1.2100521 · Cited by 198
One-pot synthesis of uniform carbon-coated MoO2 nanospheres for high-rate reversible lithium storage
Wang, Z., Chen, J. S., Zhu, T., Madhavi, S., & Lou, X. W. (2010) · Chemical Communications · doi:10.1039/c0cc01174f · Cited by 186
Self-citationXue, X.-Y., Chen, Z.-H., Xing, L.-L., Yuan, S., & Chen, Y.-J. (2011) · Chemical Communications · doi:10.1039/c1cc00076d · Cited by 183
Liu, H., Du, X., Xing, X., Wang, G., & Qiao, S. Z. (2012) · Chem. Commun. · doi:10.1039/c1cc16341h · Cited by 164
Low-temperature synthesis of large-scale single-crystal molybdenum trioxide (MoO3) nanobelts
Li, X.-L., Liu, J.-F., & Li, Y.-D. (2002) · Applied Physics Letters · doi:10.1063/1.1529307 · Cited by 163
Structure and electrochemistry of LixMoO2
Dahn, J. R., & McKinnon, W. R. (1987) · Solid State Ionics · doi:10.1016/0167-2738(87)90074-9 · Cited by 152
Green Synthesis and Characterization of Anisotropic Uniform Single-Crystal α-MoO3Nanostructures
Fang, L., Shu, Y., Wang, A., & Zhang, T. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp065791r · Cited by 152
Lithium insertion/extraction reaction on crystalline MoO3
Tsumura, T. (1997) · Solid State Ionics · doi:10.1016/s0167-2738(97)00418-9 · Cited by 149
Thermoelectrochemically Activated MoO[sub 2] Powder Electrode for Lithium Secondary Batteries
Ku, J. H., Jung, Y. S., Lee, K. T., Kim, C. H., & Oh, S. M. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3141670 · Cited by 149
Molybdenum oxide nanowires: synthesis & properties
Mai, L., Yang, F., Zhao, Y., Xu, X., Xu, L., Hu, B., Luo, Y., & Liu, H. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70165-1 · Cited by 147
Riley, L. A., Lee, S.-H., Gedvilias, L., & Dillon, A. C. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.013 · Cited by 139
Tao, T., Glushenkov, A. M., Zhang, C., Zhang, H., Zhou, D., Guo, Z., Liu, H., Chen, Q., Hu, H., & Chen, Y. I. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm10220f · Cited by 129
Electrochemical reactivity of ball-milled MoO3−y as anode materials for lithium-ion batteries
Jung, Y. S., Lee, S., Ahn, D., Dillon, A. C., & Lee, S.-H. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.11.125 · Cited by 129
Cheng, L., Shao, M., Wang, X., & Hu, H. (2009) · Chemistry - A European Journal · doi:10.1002/chem.200802182 · Cited by 126
Dewangan, K., Sinha, N. N., Sharma, P. K., Pandey, A. C., Munichandraiah, N., & Gajbhiye, N. S. (2010) · CrystEngComm · doi:10.1039/c0ce00271b · Cited by 100
Cited by
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Nanostructured Mo-based electrode materials for electrochemical energy storage
Hu, X., Zhang, W., Liu, X., Mei, Y., & Huang, Y. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00350k · Cited by 711
Two‐Dimensional Molybdenum Trioxide and Dichalcogenides
Balendhran, S., Walia, S., Nili, H., Ou, J. Z., Zhuiykov, S., Kaner, R. B., Sriram, S., Bhaskaran, M., & Kalantar‐zadeh, K. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300125 · Cited by 525
Zheng, Y., Zhou, T., Zhao, X., Pang, W. K., Gao, H., Li, S., Zhou, Z., Liu, H., & Guo, Z. (2017) · Advanced Materials · doi:10.1002/adma.201700396 · Cited by 421
Enhanced Charge Carrier Mobility in Two‐Dimensional High Dielectric Molybdenum Oxide
Balendhran, S., Deng, J., Ou, J. Z., Walia, S., Scott, J., Tang, J., Wang, K. L., Field, M. R., Russo, S., Zhuiykov, S., et al. (2013) · Advanced Materials · doi:10.1002/adma.201203346 · Cited by 406
Metadata
- Authors
- Wang, Z., Madhavi, S., & Lou, X. W. (.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-05-31
- Volume
- 116
- Issue
- 23
- Pages
- 12508-12513
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2058895863
- Cited by
- 260
- References
- 30
- FWCI
- 18.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.