The DOI matches its Crossref record.
Densification of C–S–H Measured by 1H NMR Relaxometry
Open accessAbstract
The nanoscale morphology of, and pore water interactions in, calcium silicate hydrate (C–S–H), the active component of cement, remain uncertain. 1 H nuclear magnetic resonance (NMR) can fully characterize the nanoporosity of C–S–H in as-prepared material without the need for damaging sample drying. We use NMR to follow the density of C–S–H in sealed cured pastes as a function of degree of hydration (α) and water to cement ratio. We show clear evidence for C–S–H densification. The C–S–H “solid” density, exclusive of gel pore water, slightly decreases from ρ x = 2.73 g/cm 3 at α ≈ 0.4 to 2.65 g/cm 3 at α ≈ 0.9 due to an increase in the number of layers in the nanocrystalline aggregates. In the same range, the C–S–H “bulk” density, including gel water, increases from around 1.8 to 2.1 g/cm 3 . The increase corresponds to a transition from growth of low-density product containing gel pores to higher density product devoid of gel pores. We update Powers’ classical model from 1947. In contrast to the single “hydrate” of Powers, NMR differentiates between C–S–H and calcium hydroxide and separates out the interlayer water within the C–S–H. It shows a clear nonlinearity in the growth of the different fractions with α.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Reactivity of supplementary cementitious materials (SCMs) in cement blends
Skibsted, J., & Snellings, R. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105799 · Cited by 984
Calcium silicate hydrates: Solid and liquid phase composition
Lothenbach, B., & Nonat, A. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.03.019 · Cited by 538
Myers, R. J., L'Hôpital, E., Provis, J. L., & Lothenbach, B. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.10.015 · Cited by 469
Solid-state nuclear magnetic resonance spectroscopy of cements
Walkley, B., & Provis, J. L. (2019) · Materials Today Advances · doi:10.1016/j.mtadv.2019.100007 · Cited by 361
Investigation of C-A-S-H composition, morphology and density in Limestone Calcined Clay Cement (LC3)
Avet, F., Boehm-Courjault, E., & Scrivener, K. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.10.011 · Cited by 286
Self-citationMuller, A. C. A., Scrivener, K. L., Gajewicz, A. M., & McDonald, P. J. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.01.032 · Cited by 266
Self-citationMultiscale understanding of tricalcium silicate hydration reactions
Cuesta, A., Zea-Garcia, J. D., Londono-Zuluaga, D., De la Torre, A. G., Santacruz, I., Vallcorba, O., Dapiaggi, M., Sanfélix, S. G., & Aranda, M. A. G. (2018) · Scientific Reports · doi:10.1038/s41598-018-26943-y · Cited by 165
Quantification methods for chloride binding in Portland cement and limestone systems
Sui, S., Wilson, W., Georget, F., Maraghechi, H., Kazemi-Kamyab, H., Sun, W., & Scrivener, K. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105864 · Cited by 135
Self-citationSaeki, N., Kurihara, R., Ohkubo, T., Teramoto, A., Suda, Y., Kitagaki, R., & Maruyama, I. (2025) · Cement and Concrete Research · doi:10.1016/j.cemconres.2024.107777 · Cited by 48
Cheng, L., Kurihara, R., Ohkubo, T., Kitagaki, R., Teramoto, A., Suda, Y., & Maruyama, I. (2025) · Cement and Concrete Research · doi:10.1016/j.cemconres.2025.107898 · Cited by 36
Kupwade-Patil, K., Boul, P. J., Rasner, D. K., Everett, S. M., Proffen, T., Page, K., Ma, D., Olds, D., Thaemlitz, C. J., & Büyüköztürk, O. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105920 · Cited by 30
Synchrotron Radiation Pair Distribution Function Analysis of Gels in Cements
Cuesta, A., Zea-Garcia, J. D., Londono-Zuluaga, D., De la Torre, A. G., Santacruz, I., Vallcorba, O., & Aranda, M. (2017) · Crystals · doi:10.3390/cryst7100317 · Cited by 24
Metadata
- Authors
- Muller, A. C. A., Scrivener, K. L., Gajewicz, A. M., & McDonald, P. J.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-12-24
- Volume
- 117
- Issue
- 1
- Pages
- 403-412
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2045735984
- Cited by
- 515
- References
- 0
- FWCI
- 52.50
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.