Pulsed Laser Ablation of Zinc in Tetrahydrofuran: Bypassing the Cavitation Bubble
The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Abstract
We applied a high-power (25 W) picosecond-pulsed laser system in combination with fast scanner optics for pulsed laser ablation in liquids in order to generate zinc/zinc oxide nanoparticles in tetrahydrofuran with optimized efficiency. Systematic variation of repetition rate and interpulse distance of subsequent laser pulses strongly affects the ablation efficiency. Shielding of subsequent laser pulses by induced cavitation bubbles could be minimized by these parameters. The analysis of experimental data results in a time constant of 55 μs concerning the cavitation bubble decay and a nonspherical shape with a lateral elongation of 120 μm after 100 μs. Regarding these parameters allows temporal and spatial bypassing of the cavitation bubble to enhance ablation efficiency and nanoparticle productivity. Furthermore, there is a nonlinear dependency of ablation efficiency on interpulse distance even if an effect coupled by cavitation bubbles can be excluded. We interpret this as a competition between two ablation mechanisms including thermal vaporization and phase explosion. For that purpose, we assume a transient preheating of the target by previous pulse, which leads to less efficient heat conduction that favors phase explosion instead of thermal vaporization. Calculations of 1D-heat conduction and analysis of generated nanoparticles support that interpretation. We were able to model the shape of the cavitation bubble and the experimental data by an adopted fit function.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The logarithmic dependence is also known for laser ablation in a gaseous environment [91,92,93,94,95].”
From Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications (2020) · cites this paper as [91]
In the citing paper
“The strategy is to spatially separate successive laser pulses by adjusting the interplay of the laser spot size, the scanning speed (relative movement between laser beam and target) and the pulse repetition rate to avoid shielding caused by the previous pulse [82,84,90,91,116].”
From Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications (2020) · cites this paper as [91]
In the citing paper
“Wagener et al. [91] also observed an optimal interpulse distance in the picosecond-pulsed, Vis laser ablation of zinc in tetrahydrofuran.”
From Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications (2020) · cites this paper as [91]
In the citing paper
“However, the decrease in productivity at longer interpulse distances without overlap was less pronounced compared to the results of the study of Sattari et al. [84].”
From Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications (2020) · cites this paper as [91]
In the citing paper
“Contrarily, for inter-pulse distance larger than 125 microns, the irradiated area has not experienced heat accumulation due to the previous pulse, being thermal ablation as the main mechanism instead of phase explosion, and gradually lowering the ablation rate.90”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [90]
3 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Room-Temperature Ultraviolet Nanowire Nanolasers
Huang, M. H., Mao, S., Feick, H., Yan, H., Wu, Y., Kind, H., Weber, E., Russo, R., & Yang, P. (2001) · Science · doi:10.1126/science.1060367 · Cited by 8,923
In vivo cancer targeting and imaging with semiconductor quantum dots
Gao, X., Cui, Y., Levenson, R. M., Chung, L. W. K., & Nie, S. (2004) · Nature Biotechnology · doi:10.1038/nbt994 · Cited by 4,772
Nanoparticles in cancer therapy and diagnosis
Brigger, I., Dubernet, C., & Couvreur, P. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(02)00044-3 · Cited by 3,039
Femtosecond filamentation in transparent media
COUAIRON, A., & MYSYROWICZ, A. (2007) · Physics Reports · doi:10.1016/j.physrep.2006.12.005 · Cited by 2,851
Enhanced bioactivity of ZnO nanoparticles—an antimicrobial study
Padmavathy, N., & Vijayaraghavan, R. (2008) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/9/3/035004 · Cited by 1,680
Dahl, J. A., Maddux, B. L. S., & Hutchison, J. E. (2007) · Chemical Reviews · doi:10.1021/cr050943k · Cited by 1,284
Ablation of metals by ultrashort laser pulses
Nolte, S., Momma, C., Jacobs, H., Tünnermann, A., Chichkov, B. N., Wellegehausen, B., & Welling, H. (1997) · Journal of the Optical Society of America B · doi:10.1364/josab.14.002716 · Cited by 1,146
Self-citationGold Nanocages: Bioconjugation and Their Potential Use as Optical Imaging Contrast Agents
Chen, J., Saeki, F., Wiley, B. J., Cang, H., Cobb, M. J., Li, Z.-Y., Au, L., Zhang, H., Kimmey, M. B., Li, X., et al. (2005) · Nano Letters · doi:10.1021/nl047950t · Cited by 977
Manias, E., Touny, A., Wu, L., Strawhecker, K., Lu, B., & Chung, T. C. (2001) · Chemistry of Materials · doi:10.1021/cm0110627 · Cited by 903
Formation and Size Control of Silver Nanoparticles by Laser Ablation in Aqueous Solution
Mafuné, Kohno, J.-Y., Takeda, Y., Kondow, T., & Sawabe, H. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp001336y · Cited by 838
Research works printed but not linked: 2
- Mafune F., 2000, J. Phys. Chem. B, 104, 9111, 10.1021/jp001336y · DOI · Paper page
- Zeng H., 2005, J. Phys. Chem. B, 109, 18260, 10.1021/jp052258n · DOI · Paper page
Cited by
Items 101–135 of 135
Riahi, F., Doñate‐Buendía, C., Barcikowski, S., & Gökce, B. (2023) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.202300145 · Cited by 9
Self-citationNanomaterials: Laser‐Based Processing in Liquid Media
Singh, S. C., Zeng, H., Yang, S., Cai, W., Hong, M., Chen, G., & Chong, T. C. (2012) · Nanomaterials · doi:10.1002/9783527646821.ch6 · Cited by 11
Heidarinassab, S., Nyabadza, A., Ahad, I. U., & Brabazon, D. (2024) · Materials · doi:10.3390/ma17184527 · Cited by 9
“Studies, such as those by Wagner and Barcikowski et al. [21], have shed light on specific factors influencing productivity.”
MethodAlshammari, T. K., Ghoshal, S. K., Bakhtiar, H., Alhajj, M., Al-Shammari, A. A. S., & Alias, S. S. (2024) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2024.125958 · Cited by 8
Peckus, D., Mykolaitis, J., Tamulevičienė, A., Klimaitė, G., Khatmi, G., Juodėnas, M., Lazauskas, A., Tamulevičius, S., & Tamulevičius, T. (2025) · Optical Materials · doi:10.1016/j.optmat.2025.116796 · Cited by 8
Synthesis of nanoparticles using pulsed laser
Naderi-Samani, H., & Razavi, R. S. (2024) · IntechOpen eBooks · doi:10.5772/intechopen.1004415 · Cited by 7
Lin, Y.-K., Wang, S., & Lee, R. (2020) · International Journal of Polymeric Materials · doi:10.1080/00914037.2020.1798434 · Cited by 6
Pustovalov, V. K., & Astafyeva, L. G. (2011) · Laser Physics · doi:10.1134/s1054660x11210195 · Cited by 6
Candela, M. T., Triviño‐Sánchez, S., Guerrero‐Martínez, A., Liz‐Marzán, L. M., & González‐Rubio, G. (2026) · Advanced Materials · doi:10.1002/adma.202523683 · Cited by 5
Temperature-dependent morphology changes of noble metal tricalcium phosphate-nanocomposites
Bergmann, C., Schwenke, A., Sajti, L., Chichkov, B. N., & Fischer, H. (2014) · Ceramics International · doi:10.1016/j.ceramint.2013.12.141 · Cited by 5
Self-citationMillion, N., Coger, V., Wilke, P., Rehbock, C., Vogt, P. M., Pich, A., & Barcikowski, S. (2017) · BioNanoMaterials · doi:10.1515/bnm-2017-0004 · Cited by 5
“(125 μJ) [40] were similar to those used here (160 μJ).”
BackgroundMethodResultSelf-citationTakai, R., Koshizaki, N., Ishikawa, Y., & Hakuta, Y. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115580 · Cited by 5
Vadillo, V., Gutiérrez, J., Insausti, M., Garitaonandia, J. S., de Muro, I. G., Quintana, I., & Barandiaran, J. M. (2019) · IEEE Magnetics Letters · doi:10.1109/lmag.2019.2934076 · Cited by 4
Kudryashov, S., Danilov, P., Schneider, L., Schille, J., Loeschner, U., Nastulyavichus, A., Smirnov, N., Kuchmizhak, A., & Vitrik, O. (2021) · Laser Physics Letters · doi:10.1088/1612-202x/abd171 · Cited by 3
Scarabelli, R., Gary‐Bobo, M., Nguyen, C., Durand, D., Esvan, J., Aufray, M., Drouet, C., & Al‐Kattan, A. (2026) · RSC Advances · doi:10.1039/d5ra09481j · Cited by 4
Fuel Production and Materials Synthesis by In-liquid Plasma
Nomura, S. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/619/1/012034 · Cited by 3
Freeland, B. H., McCann, R., Foley, G., & Brabazon, D. (2020) · doi:10.1117/12.2545878 · Cited by 3
3. Laser-generated bioactive hydrogels as ion-release systems for burn wound therapy
Coger, V., Million, N., Wilke, P., Pich, A., Vogt, P. M., Reimers, K., & Barcikowski, S. (2015) · De Gruyter eBooks · doi:10.1515/9783110354324-014 · Cited by 3
“could show that up to 5 kHz the ablation efficiency remains constant, while an exponential decrease is found at higher repetition rates [40].”
InfluentialSelf-citationHavelka, O., Thomas, A., Rodenes, M., Cvek, M., Łukowiec, D., Sorribes, I., & Torres–Mendieta, R. (2025) · Inorganic Chemistry Frontiers · doi:10.1039/d5qi01093d · Cited by 2
Lee, S., Ahn, A., & Choi, M. Y. (2015) · Bulletin of the Korean Chemical Society · doi:10.1002/bkcs.10156 · Cited by 3
Karpukhin, V. T., Malikov, M. M., Бородина, Т. И., Valyano, G. E., & Gololobova, O. A. (2012) · High Temperature · doi:10.1134/s0018151x12030121 · Cited by 2
Monsa, Y., Lerner, N., Danon, A., & Bar, I. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c07028 · Cited by 2
Mass Production of Spherical Submicrometer Particles by Pulsed Laser Melting in Liquid
Ishikawa, Y., & Koshizaki, N. (2022) · Springer eBooks · doi:10.1007/978-981-16-7798-4_8 · Cited by 2
Selvaraj, A., Parangusan, H., Vikraman, D., Nichelson, A., Bose, R., Theerthagiri, J., Alfantazi, A. M., Kim, H., & Karuppasamy, K. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13379-4.00005-5 · Cited by 4
Nguyen, T. P. T. (2013) · Institutional Repositories DataBase (IRDB) · Cited by 2
Reductive responsive hyaluronic acid conjugated S-nitrothiol prodrugs as drug carriers
Lin, Y.-K., Wang, S., & Lee, R. (2021) · International Journal of Polymeric Materials · doi:10.1080/00914037.2021.1931207 · Cited by 1
Gabriel, P., Liu, J., Staab, F., Streubel, R., Miertz, M., Durst, K., Gutfleisch, O., Barcikowski, S., & Ziefuß, A. R. (2023) · ChemRxiv · doi:10.26434/chemrxiv-2023-g56vc · Cited by 1
Self-citationLaser Fabrication and Nanostructuring
Esen, C., & Ostendorf, A. (2015) · Photonics · doi:10.1002/9781119011781.ch10
Wavelengths effect on nonlinear refraction of copper nanoparticles suspension
Al-aaraji, H. H., & Salman, Q. M. (2023) · AIP conference proceedings · doi:10.1063/5.0123008
Production of Yb:YVO4 nanoparticles by pulsed laser ablation in liquid using a femtosecond laser
Bond, L., Jönsson, E., & Engholm, M. (2024) · Laser applications in microelectronic and optoelectronic manufacturing. Conference · doi:10.1117/12.3002581
“Ultrafast femtosecond and picosecond pulses offer advantages due to their high peak powers, enabling precise control of the laser-material interaction and minimizing heat-affected zones [15], all the while showcasing shorter pulse durations than the electron-phonon coupling time.”
BackgroundBavani, T., & Madhavan, J. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13379-4.00007-9
Zhang, S., Hu, Z., Feng, L., Zhang, W., Luo, T., Li, M. F., Wang, Z., Zong, K., & Hu, S. (2026) · Journal of Analytical Atomic Spectrometry · doi:10.1039/d5ja00446b
Resano-Garcia, A. (2016) · theses.fr (ABES) · doi:10.70675/c8ee970aza492z4c68z9ff1ze0a35e514197 · Cited by 3
Synthesis of novel nanomaterials for biomedical applications by ultrashort laser ablation in liquids
Maximova, K. A. (2014) · theses.fr (ABES) · doi:10.70675/1de8052fze528z416cza6ecz57c22a83617f
Metadata
- Authors
- Wagener, P., Schwenke, A., Chichkov, B. N., & Barcikowski, S.
- Affiliations
- Laser Zentrum Hannover (DE)
- Corresponding author
- Barcikowski, Stephan
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-04-02
- Volume
- 114
- Issue
- 17
- Pages
- 7618-7625
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2026737832
- Cited by
- 133
- References
- 60
- Citations by year
- 2026: 4 · 2025: 4 · 2024: 8 · 2023: 5 · 2022: 5 · 2021: 8 · 2020: 15 · 2019: 7 · 2018: 8 · 2017: 14 · 2016: 10 · 2015: 7 · 2014: 6 · 2013: 5 · 2012: 15
- FWCI
- 6.04
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- The Journal of Physical Chemistry C (publishedVersion)
- Funders
- Deutsche Forschungsgemeinschaft
- Bundesministerium für Bildung und Forschung
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Physical Sciences › Physics and Astronomy › Acoustics and Ultrasonics › Ultrasound and Cavitation Phenomena
- Keywords
- pulsed laser ablation in liquid, zinc nanoparticles, zinc oxide nanoparticles, tetrahydrofuran, cavitation bubbles, picosecond pulses, repetition rate, ablation efficiency, phase explosion, thermal vaporization, heat conduction, nanoparticle formation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.