The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Model for Contact Angles and Hysteresis on Rough and Ultraphobic Surfaces
Abstract
Very rough surfaces can suspend small water drops, prevent wetting, and cause contact angles to approach 180°. A criterion based on contact line density is proposed for predicting the conditions that produce these ultrahydrophobic surfaces, where, above a critical value, drops are suspended by asperities. Critical values of the contact line density can be calculated from contact angles, asperity shape, and information about the contact liquid, such as density and surface tension. The criterion was found to correctly predict suspension for several model surfaces prepared by lithography techniques. Apparent contact angles from suspended and collapsed drops also were modeled by accounting for rough edges and employing a linear average of contact angle along the perimeter of the drop, rather than an area average of cosine. This linear model suggests that, for suspended drops, both advancing and receding angles should increase. Alternatively, for drops that have collapsed over surface asperities, advancing contact angles should increase, while receding angles should decrease. These findings agree with the observations of a number of investigators that have suggested that asperity height may be less important than asperity shape in determining wetting.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Ultrahydrophobic Surfaces. Effects of Topography Length Scales on Wettability
Öner, D., & McCarthy, T. J. (2000) · Langmuir · doi:10.1021/la000598o · Cited by 1,754
Super-Water-Repellent Fractal Surfaces
Onda, T., Shibuichi, S., Satoh, N., & Tsujii, K. (1996) · Langmuir · doi:10.1021/la950418o · Cited by 1,699
Ultrahydrophobic and Ultralyophobic Surfaces: Some Comments and Examples
Chen, W., Fadeev, A. Y., Hsieh, M. C., Öner, D., Youngblood, J., & McCarthy, T. J. (1999) · Langmuir · doi:10.1021/la990074s · Cited by 1,190
Aussillous, P., & Quéré, D. (2001) · Nature · doi:10.1038/35082026 · Cited by 1,076
Bico, J., Marzolin, C., & Quéré, D. (1999) · Europhysics Letters (EPL) · doi:10.1209/epl/i1999-00548-y · Cited by 953
Bain, C. D., Evall, J., & Whitesides, G. M. (1989) · Journal of the American Chemical Society · doi:10.1021/ja00200a039 · Cited by 922
Super Water-Repellent Surfaces Resulting from Fractal Structure
Shibuichi, S., Onda, T., Satoh, N., & Tsujii, K. (1996) · The Journal of Physical Chemistry · doi:10.1021/jp9616728 · Cited by 863
The Collected Works of J. Willard Gibbs
(1929) · Nature · doi:10.1038/124119a0 · Cited by 778
Youngblood, J. P., & McCarthy, T. J. (1999) · Macromolecules · doi:10.1021/ma9903456 · Cited by 594
The effect of surface roughening of polymers on measured contact angles of liquids
Busscher, H. J., van Pelt, A. W. J., de Boer, P., de Jong, H. P., & Arends, J. (1984) · Colloids and Surfaces · doi:10.1016/0166-6622(84)80175-4 · Cited by 516
Effects of surface roughness on wetting (theoretical)
Huh, C., & Mason, S. G. (1977) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(77)90251-x · Cited by 325
Contact Angle Hysteresis: II. Contact Angle Measurements on Rough Surfaces
DETTRE, R. H., & JOHNSON, R. E. (1964) · Advances in Chemistry · doi:10.1021/ba-1964-0043.ch008 · Cited by 316
Super‐Water‐Repellent Al 2 O 3 Coating Films with High Transparency
Tadanaga, K., Katata, N., & Minami, T. (1997) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1997.tb02943.x · Cited by 298
Tadanaga, K., Katata, N., & Minami, T. (1997) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1997.tb03253.x · Cited by 290
Contact angle hysteresis in oxygen plasma treated poly(tetrafluoroethylene)
Morra, M., Occhiello, E., & Garbassi, F. (1989) · Langmuir · doi:10.1021/la00087a050 · Cited by 279
Thermodynamics of contact angles. II. Rough solid surfaces
Eick, J. D., Good, R. J., & Neumann, A. W. (1975) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(75)90010-7 · Cited by 267
Preparation of ultra water-repellent films by microwave plasma-enhanced CVD
Hozumi, A., & Takai, O. (1997) · Thin Solid Films · doi:10.1016/s0040-6090(97)00076-x · Cited by 264
Miller, J. D., Veeramasuneni, S., Drelich, J., Yalamanchili, M. R., & Yamauchi, G. (1996) · Polymer Engineering & Science · doi:10.1002/pen.10580 · Cited by 263
Retention of liquid drops by solid surfaces
Extrand, C. W., & Gent, A. N. (1990) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(90)90225-d · Cited by 224
Self-citationAn experimental study of some effects of solid surface roughness on wetting
Oliver, J. P., Huh, C., & Mason, S. G. (1980) · Colloids and Surfaces · doi:10.1016/0166-6622(80)80039-4 · Cited by 207
Bartell, F. E., & Shepard, J. W. (1953) · The Journal of Physical Chemistry · doi:10.1021/j150503a017 · Cited by 179
The Significance of the Contact Angle in Relation to the Solid Surface
Pease, D. C. (1945) · The Journal of Physical Chemistry · doi:10.1021/j150440a007 · Cited by 163
Fractal applications: Wettability and contact angle
Hazlett, R. D. (1990) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(90)90425-n · Cited by 154
Bartell, F. E., & Shepard, J. W. (1953) · The Journal of Physical Chemistry · doi:10.1021/j150505a015 · Cited by 147
A Thermodynamic Model for Contact Angle Hysteresis
Extrand, C. W. (1998) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1998.5743 · Cited by 123
Self-citationYoung's equilibrium contact angle on rough solid surfaces. Part I. An empirical determination
Schulze, R. ‐., Possart, W., Kamusewitz, H., & Bischof, C. (1989) · Journal of Adhesion Science and Technology · doi:10.1163/156856189x00038 · Cited by 75
Shepard, J. W., & Bartell, F. E. (1953) · The Journal of Physical Chemistry · doi:10.1021/j150505a016 · Cited by 41
Cited by
Quéré, D. (2008) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.38.060407.132434 · Cited by 2,691
Bioinspired Surfaces with Special Wettability
Sun, T., Feng, L., Gao, X., & Jiang, L. (2005) · Accounts of Chemical Research · doi:10.1021/ar040224c · Cited by 2,044
Design and Creation of Superwetting/Antiwetting Surfaces
Feng, X. J., & Jiang, L. (2006) · Advanced Materials · doi:10.1002/adma.200501961 · Cited by 2,030
Bhushan, B., & Jung, Y. C. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2010.04.003 · Cited by 1,989
Petal Effect: A Superhydrophobic State with High Adhesive Force
Feng, L., Zhang, Y., Xi, J., Zhu, Y., Wang, N., Xia, F., & Jiang, L. (2008) · Langmuir · doi:10.1021/la703821h · Cited by 1,982
Metadata
- Authors
- Extrand, C. W.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-09-04
- Volume
- 18
- Issue
- 21
- Pages
- 7991-7999
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2036092043
- Cited by
- 631
- References
- 29
- FWCI
- 8.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.