Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 440

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Surface Modification of Magnetic Nanoparticles with Alkoxysilanes and Their Application in Magnetic Bioseparations

Bruce, Ian J., Sen, Tapas·2005·Langmuir

Abstract

A versatile and inexpensive method for the introduction of amine groups onto the surface of silica-coated magnetite composite nanoparticles has been established based on the condensation of (aminopropyl)triethoxysilane (APTS). The process was observed to be sensitive to a range of variables, and a range of silane surface-modified nanoparticles was synthesized under various reaction conditions, that is, solvent systems [water, tetrahydrofuran (THF), ethanol, or 1:1 mixtures of them], reaction times (from 1 to 24 h), and temperatures (18, 50, and 70 degrees C), with water as the catalyst and silane at either 0.2% or 2% (w/v) in an attempt to optimize the process. The products of the various reactions were characterized in terms of their possession of surface -NH2 groups, morphologies, and properties with respect to DNA binding and elution before being modified with a single-stranded oligonucleotide capture sequence. It was observed that careful manipulation of temperature, time, and solvent conditions was important for optimal silanization of the nanoparticles, and in our experiments best results were obtained when silanization of the particles in suspension involved use of water as the solvent and APTS at 0.2% (w/v) and when the reaction was conducted at room temperature for 5 h and was preceded by ultrasonication of the particle suspension. The materials produced were used in experiments to selectively capture complementary nucleic acid sequences by hybridization after grafting with an oligonucleotide. The efficiency of the oligonucleotide-modified particles in the capture experiments was observed to be directly related to the original density of amine groups present at the surface of the support. The results indicate that surface engineering of the nanoparticles was possible by silanization under defined, optimized conditions. This approach could be extended to the activation of such surfaces and other materials with other functional groups.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/la050553t

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 440

Metadata

Authors
Bruce, I. J., & Sen, T.
Venue
Langmuir
Published
2005-06-21
Volume
21
Issue
15
Pages
7029-7035
ISSN
  • 0743-7463 (ISSN-L)
  • 1520-5827
OpenAlex
W2033955490
Cited by
440
References
7
FWCI
10.12
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.