The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Adsorption Hysteresis of Nitrogen and Argon in Pore Networks and Characterization of Novel Micro- and Mesoporous Silicas
Abstract
We report results of nitrogen and argon adsorption experiments performed at 77.4 and 87.3 K on novel micro/mesoporous silica materials with morphologically different networks of mesopores embedded into microporous matrixes: SE3030 silica with worm-like cylindrical channels of mode diameter of approximately 95 angstroms, KLE silica with cage-like spheroidal pores of ca. 140 angstroms, KLE/IL silica with spheroidal pores of approximately 140 angstroms connected by cylindrical channels of approximately 26 angstroms, and, also for a comparison, on Vycor glass with a disordered network of pores of mode diameter of approximately 70 angstroms. We show that the type of hysteresis loop formed by adsorption/desorption isotherms is determined by different mechanisms of condensation and evaporation and depends upon the shape and size of pores. We demonstrate that adsorption experiments performed with different adsorptives allow for detecting and separating the effects of pore blocking/percolation and cavitation in the course of evaporation. The results confirm that cavitation-controlled evaporation occurs in ink-bottle pores with the neck size smaller than a certain critical value. In this case, the pressure of evaporation does not depend upon the neck size. In pores with larger necks, percolation-controlled evaporation occurs, as observed for nitrogen (at 77.4 K) and argon (at 87.3 K) on porous Vycor glass. We elaborate a novel hybrid nonlocal density functional theory (NLDFT) method for calculations of pore size distributions from adsorption isotherms in the entire range of micro- and mesopores. The NLDFT method, applied to the adsorption branch of the isotherm, takes into account the effect of delayed capillary condensation in pores of different geometries. The pore size data obtained by the NLDFT method for SE3030, KLE, and KLE/IL silicas agree with the data of SANS/SAXS techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Adsorption surface area and porosity
Steele, W. A. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90305-3 · Cited by 7,928
Groen, J. C., Peffer, L. A. A., & Pérez-Ramı́rez, J. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00339-1 · Cited by 2,131
Direct imaging of the pores and cages of three-dimensional mesoporous materials
Sakamoto, Y., Kaneda, M., Terasaki, O., Zhao, D. Y., Kim, J. M., Stucky, G., Shin, H. J., & Ryoo, R. (2000) · Nature · doi:10.1038/35044040 · Cited by 876
Fluids adsorbed in narrow pores: phase equilibria and structure
Evans, R. (1990) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/2/46/001 · Cited by 653
Ravikovitch, P. I., & Neimark, A. V. (2002) · Langmuir · doi:10.1021/la0107594 · Cited by 533
Self-citationRavikovitch, P. I., & Neimark, A. V. (2002) · Langmuir · doi:10.1021/la026140z · Cited by 512
Self-citationCharacterization of nanoporous materials from adsorption and desorption isotherms
Ravikovitch, P. I., & Neimark, A. V. (2001) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(01)00614-8 · Cited by 433
Self-citationGelb, L. D., & Gubbins, K. E. (1998) · Langmuir · doi:10.1021/la9710379 · Cited by 432
Capillary condensation in MMS and pore structure characterization
Neimark, A. V., & Ravikovitch, P. I. (2001) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(01)00251-7 · Cited by 415
Self-citation
Cited by
Physical Adsorption Characterization of Nanoporous Materials
Thommes, M. (2010) · Chemie Ingenieur Technik · doi:10.1002/cite.201000064 · Cited by 1,394
Self-citationNeimark, A. V., Sing, K. S. W., & Thommes, M. (2008) · Handbook of Heterogeneous Catalysis · doi:10.1002/9783527610044.hetcat0037 · Cited by 1,301
Self-citationDensity functional theory methods for characterization of porous materials
Landers, J., Gor, G. Y., & Neimark, A. V. (2013) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2013.01.007 · Cited by 1,239
Self-citationWei, T., Chen, C., Chien, H., Lu, S., & Hu, C. (2010) · Advanced Materials · doi:10.1002/adma.200902175 · Cited by 1,191
Bardestani, R., Patience, G. S., & Kaliaguine, S. (2019) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.23632 · Cited by 1,160
Recent advances in the textural characterization of hierarchically structured nanoporous materials
Cychosz, K. A., Guillet-Nicolas, R., García-Martínez, J., & Thommes, M. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00391e · Cited by 1,060
Self-citationQuenched solid density functional theory and pore size analysis of micro-mesoporous carbons
Neimark, A. V., Lin, Y., Ravikovitch, P. I., & Thommes, M. (2009) · Carbon · doi:10.1016/j.carbon.2009.01.050 · Cited by 868
Self-citationProgress in the Physisorption Characterization of Nanoporous Gas Storage Materials
Cychosz, K. A., & Thommes, M. (2018) · Engineering · doi:10.1016/j.eng.2018.06.001 · Cited by 782
Self-citationPhysical adsorption characterization of nanoporous materials: progress and challenges
Thommes, M., & Cychosz, K. A. (2014) · Adsorption · doi:10.1007/s10450-014-9606-z · Cited by 767
Self-citationProteins in Mesoporous Silicates
Hudson, S., Cooney, J., & Magner, E. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200705238 · Cited by 663
Klimakow, M., Klobes, P., Thünemann, A. F., Rademann, K., & Emmerling, F. (2010) · Chemistry of Materials · doi:10.1021/cm1012119 · Cited by 606
Xiong, Q., Baychev, T. G., & Jivkov, A. P. (2016) · Journal of Contaminant Hydrology · doi:10.1016/j.jconhyd.2016.07.002 · Cited by 606
Schlumberger, C., & Thommes, M. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202002181 · Cited by 536
Self-citationCapillary condensation of adsorbates in porous materials
Horikawa, T., Do, D. D., & Nicholson, D. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.08.003 · Cited by 478
Gor, G. Y., Thommes, M., Cychosz, K. A., & Neimark, A. V. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.037 · Cited by 432
Self-citationMonson, P. A. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.04.043 · Cited by 401
Park, Y.-C., Tokiwa, H., Kakinuma, K., Watanabe, M., & Uchida, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.091 · Cited by 389
Density Functional Theory Model of Adsorption on Amorphous and Microporous Silica Materials
Ravikovitch, P. I., & Neimark, A. V. (2006) · Langmuir · doi:10.1021/la0616146 · Cited by 370
Self-citationMesopore quality determines the lifetime of hierarchically structured zeolite catalysts
Milina, M., Mitchell, S., Crivelli, P., Cooke, D., & Pérez-Ramírez, J. (2014) · Nature Communications · doi:10.1038/ncomms4922 · Cited by 351
NMR cryoporometry: Principles, applications and potential
Petrov, O. V., & Furó, I. (2009) · Progress in Nuclear Magnetic Resonance Spectroscopy · doi:10.1016/j.pnmrs.2008.06.001 · Cited by 348
Ceria-Doped Ni/SBA-16 Catalysts for Dry Reforming of Methane
Zhang, S., Muratsugu, S., Ishiguro, N., & Tada, M. (2013) · ACS Catalysis · doi:10.1021/cs400159w · Cited by 347
Reticulated Nanoporous Polymers by Controlled Polymerization-Induced Microphase Separation
Seo, M., & Hillmyer, M. A. (2012) · Science · doi:10.1126/science.1221383 · Cited by 337
Cobalt Oxide Aerogels of Ideal Supercapacitive Properties Prepared with an Epoxide Synthetic Route
Wei, T.-Y., Chen, C.-H., Chang, K.-H., Lu, S.-Y., & Hu, C.-C. (2009) · Chemistry of Materials · doi:10.1021/cm9007365 · Cited by 299
Adsorption, intrusion and freezing in porous silica: the view from the nanoscale
Coasne, B., Galarneau, A., Pellenq, R. J. M., & Di Renzo, F. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35384a · Cited by 263
Pitfalls in the characterization of nanoporous and nanosized materials
Weidenthaler, C. (2011) · Nanoscale · doi:10.1039/c0nr00561d · Cited by 256
Ink solvent dependence of the ionomer distribution in the catalyst layer of a PEMFC
Orfanidi, A., Rheinländer, P. J., Schulte, N., & Gasteiger, H. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1251814jes · Cited by 169
Kimura, T. (2011) · Chemistry – An Asian Journal · doi:10.1002/asia.201100173 · Cited by 17
Metadata
- Authors
- Thommes, M., Smarsly, B., Groenewolt, M., Ravikovitch, P. I., & Neimark, A. V.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-12-15
- Volume
- 22
- Issue
- 2
- Pages
- 756-764
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2087346669
- Cited by
- 589
- References
- 27
- FWCI
- 8.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.