The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Bacterial Retention on Superhydrophobic Titanium Surfaces Fabricated by Femtosecond Laser Ablation
Abstract
Two-tier micro- and nanoscale quasi-periodic self-organized structures, mimicking the surface of a lotus Nelumbo nucifera leaf, were fabricated on titanium surfaces using femtosecond laser ablation. The first tier consisted of large grainlike convex features between 10 and 20 μm in size. The second tier existed on the surface of these grains, where 200 nm (or less) wide irregular undulations were present. The introduction of the biomimetic surface patterns significantly transformed the surface wettabilty of the titanium surface. The original surface possessed a water contact angle of θ(W) 73 ± 3°, whereas the laser-treated titanium surface became superhydrophobic, with a water contact angle of θ(W) 166 ± 4°. Investigations of the interaction of S. aureus and P. aeruginosa with these superhydrophobic surfaces at the surface-liquid interface revealed a highly selective retention pattern for two pathogenic bacteria. While S. aureus cells were able to successfully colonize the superhydrophobic titanium surfaces, no P. aeruginosa cells were able to attach to the surface (i.e., any attached bacterial cells were below the estimated lower detection limit).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
Purity of the sacred lotus, or escape from contamination in biological surfaces
Barthlott, W., & Neinhuis, C. (1997) · Planta · doi:10.1007/s004250050096 · Cited by 6,860
Tissue Cells Feel and Respond to the Stiffness of Their Substrate
Discher, D. E., Janmey, P., & Wang, Y.-L. (2005) · Science · doi:10.1126/science.1116995 · Cited by 6,382
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
LIU, X., CHU, P., & DING, C. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.11.001 · Cited by 3,487
Bacterial Biofilms in Nature and Disease
Costerton, J. W., Cheng, K. J., Geesey, G. G., Ladd, T. I., Nickel, J. C., Dasgupta, M., & Marrie, T. J. (1987) · Annual Review of Microbiology · doi:10.1146/annurev.mi.41.100187.002251 · Cited by 3,145
Marambio-Jones, C., & Hoek, E. M. V. (2010) · Journal of Nanoparticle Research · doi:10.1007/s11051-010-9900-y · Cited by 2,914
Exploring and Engineering the Cell Surface Interface
Stevens, M. M., & George, J. H. (2005) · Science · doi:10.1126/science.1106587 · Cited by 2,607
Surface Roughness and Contact Angle.
Wenzel, R. N. (1949) · The Journal of Physical and Colloid Chemistry · doi:10.1021/j150474a015 · Cited by 2,321
Quantification of biofilm structures by the novel computer program comstat
Heydorn, A., Nielsen, A. T., Hentzer, M., Sternberg, C., Givskov, M., Ersbøll, B. K., & Molin, S. (2000) · Microbiology · doi:10.1099/00221287-146-10-2395 · Cited by 2,179
Biomaterial-Centered Infection: Microbial Adhesion Versus Tissue Integration
Gristina, A. G. (1987) · Science · doi:10.1126/science.3629258 · Cited by 2,156
Cited by
Natural Bactericidal Surfaces: Mechanical Rupture of Pseudomonas aeruginosa Cells by Cicada Wings
Ivanova, E. P., Hasan, J., Webb, H. K., Truong, V. K., Watson, G. S., Watson, J. A., Baulin, V. A., Pogodin, S., Wang, J. Y., Tobin, M. J., et al. (2012) · Small · doi:10.1002/smll.201200528 · Cited by 1,019
Self-citationAntibacterial surfaces: the quest for a new generation of biomaterials
Hasan, J., Crawford, R. J., & Ivanova, E. P. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2013.01.017 · Cited by 955
Self-citationLiquid-infused structured surfaces with exceptional anti-biofouling performance
Epstein, A. K., Wong, T.-S., Belisle, R. A., Boggs, E. M., & Aizenberg, J. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1201973109 · Cited by 928
Zheng, S., Bawazir, M., Dhall, A., Kim, H.-E., He, L., Heo, J., & Hwang, G. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.643722 · Cited by 872
Superhydrophobic surfaces for the reduction of bacterial adhesion
Zhang, X., Wang, L., & Levänen, E. (2013) · RSC Advances · doi:10.1039/c3ra40497h · Cited by 676
Mechano-bactericidal actions of nanostructured surfaces
Linklater, D. P., Baulin, V. A., Juodkazis, S., Crawford, R. J., Stoodley, P., & Ivanova, E. P. (2021) · Nature Reviews Microbiology · doi:10.1038/s41579-020-0414-z · Cited by 578
Self-citationRecent advances in the potential applications of bioinspired superhydrophobic materials
Darmanin, T., & Guittard, F. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02071e · Cited by 555
Natural and bioinspired nanostructured bactericidal surfaces
Tripathy, A., Sen, P., Su, B., & Briscoe, W. H. (2017) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2017.07.030 · Cited by 510
Superhydrophobic materials for biomedical applications
Falde, E. J., Yohe, S. T., Colson, Y. L., & Grinstaff, M. W. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.050 · Cited by 468
Fabrication of Micro/Nano Structures on Metals by Femtosecond Laser Micromachining
Ahmmed, K., Grambow, C., & Kietzig, A.-M. (2014) · Micromachines · doi:10.3390/mi5041219 · Cited by 466
Surface characteristics influencing bacterial adhesion to polymeric substrates
Yuan, Y., Hays, M. P., Hardwidge, P. R., & Kim, J. (2017) · RSC Advances · doi:10.1039/c7ra01571b · Cited by 466
Superhydrophobic Surfaces by Electrochemical Processes
Darmanin, T., de Givenchy, E. T., Amigoni, S., & Guittard, F. (2013) · Advanced Materials · doi:10.1002/adma.201204300 · Cited by 457
Jaggessar, A., Shahali, H., Mathew, A., & Yarlagadda, P. K. D. V. (2017) · Journal of Nanobiotechnology · doi:10.1186/s12951-017-0306-1 · Cited by 441
Nano-structured antimicrobial surfaces: From nature to synthetic analogues
Elbourne, A., Crawford, R. J., & Ivanova, E. P. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.07.021 · Cited by 365
Self-citationHasan, J., Webb, H. K., Truong, V. K., Pogodin, S., Baulin, V. A., Watson, G. S., Watson, J. A., Crawford, R. J., & Ivanova, E. P. (2013) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-012-4628-5 · Cited by 354
Self-citationAntibacterial Fluorinated Silica Colloid Superhydrophobic Surfaces
Privett, B. J., Youn, J., Hong, S. A., Lee, J., Han, J., Shin, J. H., & Schoenfisch, M. H. (2011) · Langmuir · doi:10.1021/la201801e · Cited by 323
Laser engineering of biomimetic surfaces
Stratakis, E., Bonse, J., Heitz, J., Siegel, J., Tsibidis, G. D., Skoulas, E., Papadopoulos, A., Mimidis, A., Joel, A.-C., Comanns, P., et al. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100562 · Cited by 301
Towards Laser-Textured Antibacterial Surfaces
Lutey, A. H. A., Gemini, L., Romoli, L., Lazzini, G., Fuso, F., Faucon, M., & Kling, R. (2018) · Scientific Reports · doi:10.1038/s41598-018-28454-2 · Cited by 292
Balasubramaniam, B., Prateek, Ranjan, S., Saraf, M., Kar, P., Singh, S. P., Thakur, V. K., Singh, A., & Gupta, R. K. (2021) · ACS Pharmacology & Translational Science · doi:10.1021/acsptsci.0c00174 · Cited by 285
Self-Defensive Layer-by-Layer Films with Bacteria-Triggered Antibiotic Release
Zhuk, I., Jariwala, F., Attygalle, A. B., Wu, Y., Libera, M. R., & Sukhishvili, S. A. (2014) · ACS Nano · doi:10.1021/nn500674g · Cited by 275
Designing Bioinspired Anti‐Biofouling Surfaces based on a Superwettability Strategy
Zhang, P., Lin, L., Zang, D., Guo, X., & Liu, M. (2017) · Small · doi:10.1002/smll.201503334 · Cited by 266
Taliantzis, K., & Ellinas, K. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103566 · Cited by 83
Metadata
- Authors
- Fadeeva, E., Truong, V. K., Stiesch, M., Chichkov, B. N., Crawford, R. J., Wang, J., & Ivanova, E. P.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-02-02
- Volume
- 27
- Issue
- 6
- Pages
- 3012-3019
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2026234928
- Cited by
- 440
- References
- 49
- FWCI
- 7.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.