The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Different Shades of Oxide: From Nanoscale Wetting Mechanisms to Contact Printing of Gallium-Based Liquid Metals
Abstract
Gallium-based liquid metals are of interest for a variety of applications including flexible electronics, soft robotics, and biomedical devices. Still, nano- to microscale device fabrication with these materials is challenging because, despite having surface tension 10 times higher than water, they strongly adhere to a majority of substrates. This unusually high adhesion is attributed to the formation of a thin oxide shell; however, its role in the adhesion process has not yet been established. In this work, we demonstrate that, dependent on dynamics of formation and resulting morphology of the liquid metal-substrate interface, GaInSn adhesion can occur in two modes. The first mode occurs when the oxide shell is not ruptured as it makes contact with the substrate. Because of the nanoscale topology of the oxide surface, this mode results in minimal adhesion between the liquid metal and most solids, regardless of substrate's surface energy or texture. In the second mode, the formation of the GaInSn-substrate interface involves rupturing of the original oxide skin and formation of a composite interface that includes contact between the substrate and pieces of old oxide, bare liquid metal, and new oxide. We demonstrate that in this latter mode GaInSn adhesion is dominated by the intimate contact between new oxide and substrate. We also show that by varying the pinned contact line length using varied degrees of surface texturing, the adhesion of GaInSn in this mode can be either decreased or increased. Lastly, we demonstrate how these two adhesion modes limit microcontact printing of GaInSn patterns but can be exploited to repeatedly print individual sub-200 nm liquid metal drops.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Intermolecular and Surface Forces
(2011) · Elsevier eBooks · doi:10.1016/c2011-0-05119-0 · Cited by 8,968
Surface energy and the contact of elastic solids
Johnson, K. L., Kendall, K., & Roberts, A. D. (1971) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1971.0141 · Cited by 8,061
Materials and Mechanics for Stretchable Electronics
Rogers, J. A., Someya, T., & Huang, Y. (2010) · Science · doi:10.1126/science.1182383 · Cited by 5,042
Xia, Y., & Whitesides, G. M. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.153 · Cited by 4,611
Soft lithography for micro- and nanoscale patterning
Qin, D., Xia, Y., & Whitesides, G. M. (2010) · Nature Protocols · doi:10.1038/nprot.2009.234 · Cited by 2,334
Capillarity and wetting phenomena: drops, bubbles, pearls, waves
(2004) · Choice Reviews Online · doi:10.5860/choice.41-5349 · Cited by 2,017
Dickey, M. D., Chiechi, R. C., Larsen, R. J., Weiss, E. A., Weitz, D. A., & Whitesides, G. M. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701216 · Cited by 1,468
Polymers for gas separations: the next decade
Alexander Stern, S. (1994) · Journal of Membrane Science · doi:10.1016/0376-7388(94)00141-3 · Cited by 954
3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
Characterization of Nontoxic Liquid-Metal Alloy Galinstan for Applications in Microdevices
Liu, T., Sen, P., & Kim, C.-J. (2012) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2011.2174421 · Cited by 719
Stretchable Electronics: Materials Strategies and Devices
Kim, D., & Rogers, J. A. (2008) · Advanced Materials · doi:10.1002/adma.200801788 · Cited by 648
Enhanced Condensation on Lubricant-Impregnated Nanotextured Surfaces
Anand, S., Paxson, A. T., Dhiman, R., Smith, J. D., & Varanasi, K. K. (2012) · ACS Nano · doi:10.1021/nn303867y · Cited by 630
Self-citationDirect Writing of Gallium‐Indium Alloy for Stretchable Electronics
Boley, J. W., White, E. L., Chiu, G. T. ‐., & Kramer, R. K. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303220 · Cited by 546
Stretchable Microfluidic Radiofrequency Antennas
Kubo, M., Li, X., Kim, C., Hashimoto, M., Wiley, B. J., Ham, D., & Whitesides, G. M. (2010) · Advanced Materials · doi:10.1002/adma.200904201 · Cited by 450
Three-dimensional nanonetworks for giant stretchability in dielectrics and conductors
Park, J., Wang, S., Li, M., Ahn, C., Hyun, J. K., Kim, D. S., Kim, D. K., Rogers, J. A., Huang, Y., & Jeon, S. (2012) · Nature Communications · doi:10.1038/ncomms1929 · Cited by 334
X-ray study of the oxidation of liquid-gallium surfaces
Regan, M. J., Tostmann, H., Pershan, P. S., Magnussen, O. M., DiMasi, E., Ocko, B. M., & Deutsch, M. (1997) · Physical Review B · doi:10.1103/physrevb.55.10786 · Cited by 325
Cheng, S., & Wu, Z. (2012) · Lab on a Chip · doi:10.1039/c2lc21176a · Cited by 300
Sivan, V., Tang, S., O'Mullane, A. P., Petersen, P., Eshtiaghi, N., Kalantar‐zadeh, K., & Mitchell, A. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200837 · Cited by 296
Liquid-Phase Gallium–Indium Alloy Electronics with Microcontact Printing
Tabatabai, A., Fassler, A., Usiak, C., & Majidi, C. (2013) · Langmuir · doi:10.1021/la401245d · Cited by 293
Masked Deposition of Gallium‐Indium Alloys for Liquid‐Embedded Elastomer Conductors
Kramer, R. K., Majidi, C., & Wood, R. J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203589 · Cited by 288
Flexible microfluidic normal force sensor skin for tactile feedback
Ponce Wong, R. D., Posner, J. D., & Santos, V. J. (2012) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2012.03.023 · Cited by 251
A multiaxial stretchable interconnect using liquid-alloy-filled elastomeric microchannels
Kim, H.-J., Son, C., & Ziaie, B. (2008) · Applied Physics Letters · doi:10.1063/1.2829595 · Cited by 225
Viscosity effect on GaInSn studied by XPS
Scharmann, F., Cherkashinin, G., Breternitz, V., Knedlik, C., Hartung, G., Weber, T., & Schaefer, J. A. (2004) · Surface and Interface Analysis · doi:10.1002/sia.1817 · Cited by 219
Liquid alloy printing of microfluidic stretchable electronics
Jeong, S. H., Hagman, A., Hjort, K., Jobs, M., Sundqvist, J., & Wu, Z. (2012) · Lab on a Chip · doi:10.1039/c2lc40628d · Cited by 218
Microfluidic stretchable RF electronics
Cheng, S., & Wu, Z. (2010) · Lab on a Chip · doi:10.1039/c005159d · Cited by 177
Soft curvature sensors for joint angle proprioception
Kramer, R. K., Majidi, C., Sahai, R., & Wood, R. J. (2011) · 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems · doi:10.1109/iros.2011.6094701 · Cited by 174
Thelen, J. L., Dickey, M. D., & Ward, T. (2012) · Lab on a Chip · doi:10.1039/c2lc40492c · Cited by 166
A galinstan expansion femtosyringe for microinjection of eukaryotic organelles and prokaryotes
Knoblauch, M., Hibberd, J. M., Gray, J. C., & van Bel, A. J. E. (1999) · Nature Biotechnology · doi:10.1038/12902 · Cited by 153
Wearable tactile keypad with stretchable artificial skin
Kramer, R. K., Majidi, C., & Wood, R. J. (2011) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2011.5980082 · Cited by 145
3D structures of liquid-phase GaIn alloy embedded in PDMS with freeze casting
Fassler, A., & Majidi, C. (2013) · Lab on a Chip · doi:10.1039/c3lc50833a · Cited by 134
PDMS based coplanar microfluidic channels for the surface reduction of oxidized Galinstan
Li, G., Parmar, M., Kim, D., Lee, J., & Lee, D. (2013) · Lab on a Chip · doi:10.1039/c3lc50952d · Cited by 93
Materials and Surface Engineering in Tribology
Takadoum, J. (2008) · Wiley eBooks · doi:10.1002/9780470611524 · Cited by 92
Nano liquid metal as an emerging functional material in energy management, conversion and storage
Zhang, Q., & Liu, J. (2013) · Nano Energy · doi:10.1016/j.nanoen.2013.03.002 · Cited by 85
A Super-Lyophobic 3-D PDMS Channel as a Novel Microfluidic Platform to Manipulate Oxidized Galinstan
Kim, D., Lee, D., Choi, W., & Lee, J. (2013) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2013.2278625 · Cited by 61
Stretchable circuits and sensors for robotic origami
Paik, J. K., Kramer, R. K., & Wood, R. J. (2011) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros.2011.6094746 · Cited by 59
Spatial control of dewetting: Highly ordered Teflon nanospheres
Park, H., Russell, T. P., & Park, S. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.05.011 · Cited by 24
Cited by
Emerging Applications of Liquid Metals Featuring Surface Oxides
Dickey, M. D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5043017 · Cited by 719
Giant and switchable surface activity of liquid metal via surface oxidation
Khan, M. R., Eaker, C. B., Bowden, E. F., & Dickey, M. D. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1412227111 · Cited by 434
Gallium-rich Pd–Ga phases as supported liquid metal catalysts
Taccardi, N., Grabau, M., Debuschewitz, J., Distaso, M., Brandl, M., Hock, R., Maier, F., Papp, C., Erhard, J., Neiss, C., et al. (2017) · Nature Chemistry · doi:10.1038/nchem.2822 · Cited by 379
Tang, J., Zhao, X., Li, J., Guo, R., Zhou, Y., & Liu, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10256 · Cited by 357
Methods to pattern liquid metals
Joshipura, I. D., Ayers, H. R., Majidi, C., & Dickey, M. D. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc00330j · Cited by 326
Metadata
- Authors
- Doudrick, K., Liu, S., Mutunga, E. M., Klein, K. L., Damle, V., Varanasi, K. K., & Rykaczewski, K.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-06-04
- Volume
- 30
- Issue
- 23
- Pages
- 6867-6877
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2314655524
- Cited by
- 285
- References
- 36
- FWCI
- 20.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.