Synthesis of Novel Comb-Type Polylactide and Its Biodegradability
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
The control of biodegradation and the improvement of moldability of poly- l -lactide, PLA, have been difficult because of the high crystallinity and the lability of melt viscosity. The synthesis of biodegradable PLA having the branched structure, comb-type PLA, was carried out by using only metabolizable materials to obtain a new material showing the controlled degradation and good molding properties, and to provide information on correlation of branched structure with biodegradability. A depsipeptide−lactide random copolymer having pendant hydroxy groups, poly[(Glc-Ser)-LA], was obtained by ring-opening copolymerization of l -lactide, LA, with a protected cyclodepsipeptide, cyclo[Glc-Ser(OBzl)], and consequent deprotection. The obtained copolymer was used as a macroinitiator for graft-polymerization of LA to give comb-type PLA. The obtained comb-type PLA showed a lower glass transition point, melting point, and apparent crystallinity than linear PLA. Furthermore, it was suggested that the degradation rate of comb-type PLA could be adjusted by controlling the molecular architecture such as molecular weight of main chain and/or side chain and number of graft chain.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The result was that the obtained comb-type PLA presented a decrease in crystallinity and an increase in biodegradability compared with linear PLA.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [86]
In the citing paper
“Varying the molecular architecture could bring a change in the degradation rate of PLA [86].”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [86]
In the citing paper
“When polymerizations were performed with 5–15 mol% cyclo[Glc-Ser(OBz)], copolyesters with molecular weights in the range of 20,000–25,000 were obtained.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [86]
Citations
Cites
Hydrolytic degradation of devices based on poly(DL-lactic acid) size-dependence
Grizzi, I., Garreau, H., Li, S., & Vert, M. (1995) · Biomaterials · doi:10.1016/0142-9612(95)93258-f · Cited by 895
Frazza, E. J., & Schmitt, E. E. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050207 · Cited by 572
Biodegradable polymers as drug delivery systems
(1991) · European Journal of Medicinal Chemistry · doi:10.1016/0223-5234(91)90162-g · Cited by 514
Daniels, A. U., Chang, M. K. O., Andriano, K. P., & Heller, J. (1990) · Journal of Applied Biomaterials · doi:10.1002/jab.770010109 · Cited by 483
Zhu, K. J., Xiangzhou, L., & Shilin, Y. (1990) · Journal of Applied Polymer Science · doi:10.1002/app.1990.070390101 · Cited by 313
Li, S. M., Rashkov, I., Espartero, J. L., Manolova, N., & Vert, M. (1996) · Macromolecules · doi:10.1021/ma950531l · Cited by 262
Choi, Y. K., Bae, Y. H., & Kim, S. W. (1998) · Macromolecules · doi:10.1021/ma981069i · Cited by 200
Multifunctional initiation of lactide polymerization by stannous octoate/pentaerythritol
Kim, S. H., Han, Y., Kim, Y. H., & Hong, S. I. (1992) · Die Makromolekulare Chemie · doi:10.1002/macp.1992.021930706 · Cited by 196
Stereo block copolymers of L‐ and D‐lactides
Yui, N., Dijkstra, P. J., & Feijen, J. (1990) · Die Makromolekulare Chemie · doi:10.1002/macp.1990.021910303 · Cited by 151
New Agents for t-Butyloxycarbonylation and p-Methoxybenzyloxycarbonylation of Amino Acids
Nagasawa, T., Kuroiwa, K., Narita, K., & Isowa, Y. (1973) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.46.1269 · Cited by 125
Arvanitoyannis, I., Nakayama, A., Kawasaki, N., & Yamamoto, N. (1995) · Polymer · doi:10.1016/0032-3861(95)94344-s · Cited by 122
Parenteral depot-systems on the basis of biodegradable polyesters
Kissel, T., Brich, Z., Bantle, S., Lancranjan, I., Nimmerfall, F., & Vit, P. (1991) · Journal of Controlled Release · doi:10.1016/0168-3659(91)90028-c · Cited by 118
Breitenbach, A., & Kissel, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10077-5 · Cited by 117
Kimura, Y., MATSUZAKI, Y., Yamane, H., & Kitao, T. (1989) · Polymer · doi:10.1016/0032-3861(89)90058-x · Cited by 96
Ohya, Y., Maruhashi, S., & Ouchi, T. (1998) · Macromolecules · doi:10.1021/ma980377d · Cited by 92
Self-citationLi, Y., Nothnagel, J., & Kissel, T. (1997) · Polymer · doi:10.1016/s0032-3861(97)00178-x · Cited by 87
Tasaka, F., Miyazaki, H., Ohya, Y., & Ouchi, T. (1999) · Macromolecules · doi:10.1021/ma990766n · Cited by 73
Self-citationSynthesis of poly[(glycolic acid)‐alt‐( L ‐aspartic acid)] and its biodegradation behavior in vitro
Ouchi, T., Shiratani, M., Jinno, M., Hirao, M., & Ohya, Y. (1993) · Die Makromolekulare Chemie Rapid Communications · doi:10.1002/marc.1993.030141215 · Cited by 71
Self-citationBlock copolymers from L ‐lactide and poly(ethylene glycol) through a non‐catalyzed route
Cerrai, P., & Tricoli, M. (1993) · Die Makromolekulare Chemie Rapid Communications · doi:10.1002/marc.1993.030140901 · Cited by 61
Nakayama, A., Kawasaki, N., Arvanitoyannis, I., Iyoda, J., & Yamamoto, N. (1995) · Polymer · doi:10.1016/0032-3861(95)93933-d · Cited by 60
Ohya, Y., Maruhashi, S., & Ouchi, T. (1998) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(19980901)199:9<1785::aid-macp1785>3.0.co;2-4 · Cited by 58
Self-citationSynthesis and biodegradability of novel copolyesters containg γ-butyrolactone units
Nakayama, A., Kawasaki, N., Aiba, S., Maeda, Y., Arvanitoyannis, I., & Yamamoto, N. (1998) · Polymer · doi:10.1016/s0032-3861(97)00401-1 · Cited by 57
Atthoff, B., Trollsås, M., Claesson, H., & Hedrick, J. L. (1999) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(19990601)200:6<1333::aid-macp1333>3.0.co;2-g · Cited by 56
Ohya, Y., Maruhashi, S., & Ouchi, T. (1998) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(19980901)199:9<2017::aid-macp2017>3.0.co;2-9 · Cited by 56
Self-citationA convenient synthesis of N-tert-butyloxycarbonyl-O-benzyl-L-serine
Sugano, H., & Miyoshi, M. (1976) · The Journal of Organic Chemistry · doi:10.1021/jo00875a031 · Cited by 54
Synthesis and Characterization of Photo-Cross-Linked Networks Based on l-Lactide/Serine Copolymers
John, G., & Morita, M. (1999) · Macromolecules · doi:10.1021/ma981729j · Cited by 54
Water‐curable and biodegradable prepolymers
Kobayashi, H., Hyon, S., & Ikada, Y. (1991) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820251206 · Cited by 49
Marcincinova Benabdillah, K., Coudane, J., Boustta, M., Engel, R., & Vert, M. (1999) · Macromolecules · doi:10.1021/ma991101o · Cited by 46
Synthesis and characterization of poly(ethylene glycol) grafted poly(L-lactide)
Cho, K. Y., Kim, C.-H., Lee, J.-W., & Park, J.-K. (1999) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(19991101)20:11<598::aid-marc598>3.0.co;2-1 · Cited by 29
Solute diffusion through degradable semicrystalline polyethylene glycol/poly(l-lactide) copolymers
Liu, H., Hsieh, C.-T., & Hu, D. S.-G. (1994) · Polymer Bulletin · doi:10.1007/bf00587889 · Cited by 28
Research works printed but not linked: 5
- John G., 1997, Part A: Polym. Chem
- Kricheldolf H. R., 1993, Makromol. Chem. Macromol. Symp.
- Ouchi T., 1997, Part A: Polym. Chem
- Tasaka F., 2000, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.), 41, 1552
- Cassasa E. F., 1966, Part A-2: Polym. Phys
Cited by
Branched polyesters: recent advances in synthesis and performance
McKee, M. G., Unal, S., Wilkes, G. L., & Long, T. E. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.01.009 · Cited by 316
“synthesized various comb-shaped poly(L-lactide)s with different architectures for controlled degradation for potential biomedical applications [158].”
BackgroundLong chain branching polylactide: Structures and properties
Liu, J., Lou, L., Yu, W., Liao, R., Li, R., & Zhou, C. (2010) · Polymer · doi:10.1016/j.polymer.2010.09.002 · Cited by 223
Overstreet, D. J., Dutta, D., Stabenfeldt, S. E., & Vernon, B. L. (2012) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23081 · Cited by 199
Star-shaped and branched polylactides: Synthesis, characterization, and properties
Michalski, A., Brzezinski, M., Lapienis, G., & Biela, T. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.004 · Cited by 158
Biodegradable Shape-Memory Polymers Exhibiting Sharp Thermal Transitions and Controlled Drug Release
Nagahama, K., Ueda, Y., Ouchi, T., & Ohya, Y. (2009) · Biomacromolecules · doi:10.1021/bm9002078 · Cited by 124
Self-citation
Metadata
- Authors
- Tasaka, F., Ohya, Y., & Ouchi, T.
- Affiliations
- Kansai University (JP)
- ORCID
- Ohya, Yuichi
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-06-28
- Volume
- 34
- Issue
- 16
- Pages
- 5494-5500
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2089036527
- Semantic Scholar
- 559d31bc3928a1336844a53dd4a2c714c3b31b46
- Cited by
- 74
- References
- 30
- Citations by year
- 2026: 2 · 2023: 3 · 2022: 1 · 2021: 1 · 2020: 1 · 2019: 3 · 2018: 1 · 2017: 1 · 2016: 5 · 2015: 2 · 2014: 5 · 2013: 3 · 2012: 7
- FWCI
- 2.31
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- poly(L-lactic acid), biodegradability, controlled degradation, ring-opening copolymerization, cyclodepsipeptides, macroinitiator, graft copolymerization, branched polymer architecture, crystallinity, glass transition, melting point, side chain length
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.