The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Miscibility and Mechanical Properties of Blends of (l)-Lactide Copolymers with Atactic Poly(3-hydroxybutyrate)
Abstract
Poly( l -lactide- co -glycolide) (PLLAGA) copolymers and poly( dl -lactide) (PDLLA) were synthesized using the low toxicity compound zirconium(IV) acetylacetonate. Blends with synthetic atactic poly(3-hydroxybutyrate) (a-PHB) were prepared in film form by solvent casting. The solid-state properties of the plain polymers and of the blends were investigated by thermogravimetric analysis coupled with mass spectrometry (TGA−MS), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and stress−strain measurements. The a-PHB/PDLLA blends are miscible over the whole composition range. On the other hand, blends of a-PHB with PLLAGA copolymers containing 5 and 16 mol % of GA units show partial miscibility. The solubility limit of a-PHB in PLLAGA is around 20 wt % in both cases. In the blends, the a-PHB in excess to this value segregates as a pure phase. The mechanical properties of blend films of either PDLLA or PLLAGA containing up to 50 wt % of a-PHB can be modulated by changing blend composition. The tenacity progressively increases by the addition of a-PHB not only in the miscible amorphous a-PHB/PDLLA system but also in the partially miscible a-PHB/PLLAGA blends.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibers
Hoogsteen, W., Postema, A. R., Pennings, A. J., Ten Brinke, G., & Zugenmaier, P. (1990) · Macromolecules · doi:10.1021/ma00204a041 · Cited by 864
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Encyclopedic handbook of biomaterials and bioengineering
Wise, D. L. (1995) · Cited by 584
Molecular conformation of poly(S‐lactic acid)
De Santis, P., & Kovacs, A. J. (1968) · Biopolymers · doi:10.1002/bip.1968.360060305 · Cited by 575
Thermal degradation of poly[(R)-3-hydroxybutyrate], poly[ε-caprolactone], and poly[(S)-lactide]
Aoyagi, Y., Yamashita, K., & Doi, Y. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00265-8 · Cited by 456
Present and Future of PLA Polymers
Vert, M., Schwarch, G., & Coudane, J. (1995) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329508010289 · Cited by 365
Freier, T., Kunze, C., Nischan, C., Kramer, S., Sternberg, K., Saß, M., Hopt, U. T., & Schmitz, K.-P. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00405-7 · Cited by 241
More about the polymerization of lactides in the presence of stannous octoate
Schwach, G., Coudane, J., Engel, R., & Vert, M. (1997) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(19971130)35:16<3431::aid-pola10>3.0.co;2-g · Cited by 214
Sax's dangerous properties of industrial materials
(1993) · Choice Reviews Online · doi:10.5860/choice.30-2435 · Cited by 209
Research works printed but not linked: 11
- Khon J., 1996, Biomaterial Science
- Seebach D., 1995, Biopolymers and -oligomers of (R)-3-Hydroxyalkanoic Acids−Contributions of Synthetic Organic Chemists
- Jedlinski Z., 1991, Macromolecules, 24, 352
- Kurcok P., 1992, Macromolecules, 25, 2020
- McNeill I. C., 1985, Polym. Degrad. Stab., 11, 285
- Kopinke F.-D., 1996, Polym. Degrad. Stab., 53, 342
- McNeill I. C., 1985, Polym. Degrad. Stab., 11, 326
- Grassie N., 1984, Polym. Degrad. Stab., 6, 61
- Grassie N., 1984, Polym. Degrad. Stab., 6, 134
- Fischer E. W., 1972, Kolloid Z. Z. Polym., 251, 990
- Wood L. A., 1958, J. Polym. Sci., 28, 330
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Compatibilization in bio-based and biodegradable polymer blends
Imre, B., & Pukánszky, B. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.01.019 · Cited by 613
Fukushima, K., & Kimura, Y. (2006) · Polymer International · doi:10.1002/pi.2010 · Cited by 432
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Oyama, H. T. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.025 · Cited by 393
Preparation and Properties of Plasticized Poly(lactic acid) Films
Ljungberg, N., & Wesslén, B. (2005) · Biomacromolecules · doi:10.1021/bm050098f · Cited by 331
Anderson, K. S., & Hillmyer, M. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.047 · Cited by 300
Ljungberg, N., & Wesslén, B. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.055 · Cited by 278
Polylactic Acid: Synthesis, Properties and Applications
Avérous, L. (2008) · Monomers, Polymers and Composites from Renewable Resources · doi:10.1016/b978-0-08-045316-3.00021-1 · Cited by 258
Hassouna, F., Raquez, J.-M., Addiego, F., Dubois, P., Toniazzo, V., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.08.001 · Cited by 257
Study of Hydrogen-Bonded Blend of Polylactide with Biodegradable Hyperbranched Poly(ester amide)
Lin, Y., Zhang, K.-Y., Dong, Z.-M., Dong, L.-S., & Li, Y.-S. (2007) · Macromolecules · doi:10.1021/ma070989a · Cited by 218
New Biodegradable Polyhydroxybutyrate/Layered Silicate Nanocomposites
Maiti, P., Batt, C. A., & Giannelis, E. P. (2007) · Biomacromolecules · doi:10.1021/bm700500t · Cited by 205
Fully biodegradable Poly(lactic acid)/Starch blends: A review of toughening strategies
Koh, J. J., Zhang, X., & He, C. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.12.048 · Cited by 200
Yeh, J., Tsou, C., Huang, C., Chen, K., Wu, C., & Chai, W. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.30907 · Cited by 199
Lemmouchi, Y., Murariu, M., Santos, A. M. D., Amass, A. J., Schacht, E., & Dubois, P. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.07.006 · Cited by 167
Stereoblock Polylactides as High-Performance Bio-Based Polymers
Kakuta, M., Hirata, M., & Kimura, Y. (2009) · Polymer Reviews · doi:10.1080/15583720902834825 · Cited by 166
Notta‐Cuvier, D., Odent, J., Delille, R., Murariu, M., Lauro, F., Raquez, J., Bennani, B., & Dúbois, P. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.03.007 · Cited by 167
Hassouna, F., Raquez, J., Addiego, F., Toniazzo, V., Dúbois, P., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.12.001 · Cited by 144
Muthuraj, R., Misra, M., & Mohanty, A. K. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0636-5 · Cited by 138
Reactive Compatibilization of Polylactide/Polypropylene Blends
Xu, Y., Loi, J., Delgado, P., Topolkaraev, V. A., McEneany, R. J., Macosko, C. W., & Hillmyer, M. A. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b00882 · Cited by 140
Reactive Compatibilization of Poly( l -lactide) and Conjugated Soybean Oil
Gramlich, W. M., Robertson, M. L., & Hillmyer, M. A. (2010) · Macromolecules · doi:10.1021/ma902449x · Cited by 126
Toughness decrease of PLA‐PHBHHx blend films upon surface‐confined photopolymerization
Rasal, R. M., & Hirt, D. E. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32009 · Cited by 120
Mass Spectrometry of Synthetic Polymers
Peacock, P. M., & McEwen, C. N. (2006) · Analytical Chemistry · doi:10.1021/ac0606249 · Cited by 109
Park, J. W., Doi, Y., & Iwata, T. (2004) · Biomacromolecules · doi:10.1021/bm049905l · Cited by 102
Graphene modifications in polylactic acid nanocomposites: a review
Norazlina, H., & Kamal, Y. (2015) · Polymer Bulletin · doi:10.1007/s00289-015-1308-5 · Cited by 108
Yang, X., Clénet, J., Xu, H., Odelius, K., & Hakkarainen, M. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00235 · Cited by 102
Wang, L., Jing, X., Cheng, H., Hu, X., Yang, L., & Huang, Y. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300526u · Cited by 98
Zhao, Y., Qiu, Z., & Yang, W. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.12.008 · Cited by 96
Jost, V. (2015) · Chemical and Biochemical Engineering Quarterly · doi:10.15255/cabeq.2014.2257 · Cited by 92
Polylactide toughening with epoxy‐functionalized grafted acrylonitrile–butadiene–styrene particles
Sun, S., Zhang, M., Zhang, H., & Zhang, X. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34111 · Cited by 94
Schreck, K. M., & Hillmyer, M. A. (2007) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2007.03.017 · Cited by 88
Shin, H., Thanakkasaranee, S., Sadeghi, K., & Seo, J. (2022) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2022.100966 · Cited by 94
Miscibility, mechanical and thermal properties of poly(lactic acid)/polyester-diol blends
Okamoto, K., Ichikawa, T., Yokohara, T., & Yamaguchi, M. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.05.011 · Cited by 85
Tuning the Degradation Profiles of Poly( l -lactide)-Based Materials through Miscibility
Arias, V., Höglund, A., Odelius, K., & Albertsson, A. (2013) · Biomacromolecules · doi:10.1021/bm401667b · Cited by 82
Wu, Y. Q., Qin, Y., Yuan, M., Li, L., Chen, H., Cao, J., & Yang, J. (2014) · Polymers for Advanced Technologies · doi:10.1002/pat.3332 · Cited by 82
Applications of evolved gas analysisPart 2: EGA by mass spectrometry
Materazzi, S., Gentili, A., & Curini, R. (2006) · Talanta · doi:10.1016/j.talanta.2005.12.007 · Cited by 69
Mass Spectrometry of Synthetic Polymers
Peacock, P. M., & McEwen, C. N. (2004) · Analytical Chemistry · doi:10.1021/ac040064i · Cited by 66
Imre, B., Bedő, D., Domján, A., Schön, P. M., Vancso, G. J., & Pukánszky, B. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.007 · Cited by 65
Singh, G., Bhunia, H., Rajor, A., & Choudhary, V. (2010) · Polymer Bulletin · doi:10.1007/s00289-010-0367-x · Cited by 60
Canetti, M., Cacciamani, A., & Bertini, F. (2014) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23544 · Cited by 56
Initiation process of L ‐lactide polymerization carried out with zirconium(IV) acetylacetonate
Dobrzyński, P. (2004) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.20026 · Cited by 55
Meaurio, E., Zuza, E., & Sarasua, J.-R. (2005) · Macromolecules · doi:10.1021/ma051591m · Cited by 54
Li, S., & Woo, E. M. (2008) · Polymer International · doi:10.1002/pi.2469 · Cited by 52
Lai, S., Liu, Y.-H., Huang, C., & Don, T. (2017) · Journal of Polymer Research · doi:10.1007/s10965-017-1253-0 · Cited by 49
Physico-Mechanical Properties of Biodegradable Rubber Toughened Polymers
Farsetti, S., Cioni, B., & Lazzeri, A. (2011) · Macromolecular Symposia · doi:10.1002/masy.201150311 · Cited by 48
Thermomechanical film properties and aging of blends of poly(lactic acid) and malonate oligomers
Ljungberg, N., & Wesslén, B. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.21100 · Cited by 48
Polyhydroxyalkanoate-based amphiphilic diblock copolymers as original biocompatible nanovectors
Barouti, G., Jarnouen, K., Cammas‐Marion, S., Loyer, P., & Guillaume, S. M. (2015) · Polymer Chemistry · doi:10.1039/c5py00831j · Cited by 51
Samat, A. A., Hamid, Z. A. A., Mariatti, M., & Yahaya, B. H. (2021) · Polymers · doi:10.3390/polym13183087 · Cited by 46
Yan, J., Zheng, Y., Zhou, Y., Liu, Y., Tan, H. S., Fu, Q., & Ding, M.-M. (2023) · Polymer · doi:10.1016/j.polymer.2023.125985 · Cited by 46
Singh, G., Bhunia, H., Rajor, A., Jana, R. N., & Choudhary, V. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32305 · Cited by 46
Toughening of polylactide with epoxy‐functionalized methyl methacrylate–butadiene copolymer
Hao, Y., Liang, H., Bian, J., Sun, S., Zhang, H., & Dong, L. (2013) · Polymer International · doi:10.1002/pi.4561 · Cited by 43
Adamus, G., Rizzarelli, P., Montaudo, M. S., Kowalczuk, M. M., & Montaudo, G. (2006) · Rapid Communications in Mass Spectrometry · doi:10.1002/rcm.2365 · Cited by 42
Self-citationPlasticized properties of poly (lactic acid) and triacetine blends
Yeh, J., Huang, C., Chai, W., & Chen, K. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29761 · Cited by 43
Ramesh, K., Mishra, A. K., Patel, V. K., Vishwakarma, N. K., Biswas, C. S., Paira, T. K., Mandal, T. K., Maiti, P., Misra, N., & Ray, B. (2012) · Polymer · doi:10.1016/j.polymer.2012.10.009 · Cited by 44
Rydz, J. (2015) · Chemical and Biochemical Engineering Quarterly · doi:10.15255/cabeq.2014.2258 · Cited by 40
Synthesis, Properties, Environmental and Biomedical Applications of Polylactic Acid
Avérous, L. (2012) · Elsevier eBooks · doi:10.1016/b978-1-4557-2834-3.00009-4 · Cited by 43
Development of High Temperature Resistant Stereocomplex PLA for Injection Moulding
Körber, S., Moser, K., & Diemert, J. (2022) · Polymers · doi:10.3390/polym14030384 · Cited by 37
Miscibility and properties of linear poly(l-lactide)/branched poly(l-lactide) copolyester blends
Zuideveld, M., Gottschalk, C., Kropfinger, H., Thomann, R., Rusu, M., & Frey, H. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.034 · Cited by 43
Poly(lactic acid)-based bioplastics
Zhang, J.-F., & Sun, X. S. (2005) · Elsevier eBooks · doi:10.1533/9781845690762.2.251 · Cited by 47
Yeh, Y.-T., & Woo, E. M. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01726 · Cited by 30
Byrne, F., Ward, P. G., Kennedy, J. E., Imaz, N., Hughes, D. J., & Dowling, D. P. (2009) · Journal of Polymers and the Environment · doi:10.1007/s10924-009-0119-x · Cited by 30
Sikorska, W., Dacko, P., Sobota, M., Rydz, J., Musioł, M., & Kowalczuk, M. M. (2008) · Macromolecular Symposia · doi:10.1002/masy.200851219 · Cited by 29
Self-citationPolylactides with “green” plasticizers: Influence of isomer composition
Arias, V., Höglund, A., Odelius, K., & Albertsson, A. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39446 · Cited by 28
Brito, G. D. F., Agrawal, P., Araújo, E. M., & de Mélo, T. J. A. (2012) · Polímeros · doi:10.1590/s0104-14282012005000025 · Cited by 25
Role of the plasticizers on the crystallization of PLA and its composites with mesoporous MCM-41
Blázquez‐Blázquez, E., Barranco‐García, R., Díez‐Rodríguez, T. M., Cerrada, M. L., & Pérez, E. (2024) · Journal of Materials Science · doi:10.1007/s10853-024-09556-x · Cited by 25
Miscible Blends Based on Biodegradable Polymers
Meaurio, E., Hernandez‐Montero, N., Zuza, E., & Sarasua, J.-R. (2014) · Wiley eBooks · doi:10.1002/9783527645602.ch02 · Cited by 31
Hirai, T., Kawada, J., Narita, M., Ikawa, T., Takeshima, H., Satoh, K., & Kamigaito, M. (2019) · Polymer · doi:10.1016/j.polymer.2019.121667 · Cited by 24
Zeng, C., Zhang, N., Feng, S., & Ren, J. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2542-9 · Cited by 24
Polyesters with small structural variations improve the mechanical properties of polylactide
Odelius, K., Ohlson, M., Höglund, A., & Albertsson, A. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36842 · Cited by 23
Effects of electron radiation on properties of PLA
Malinowski, R., Rytlewski, P., & Zenkiewicz, M. (2011) · Archives of Materials Science and Engineering · Cited by 23
Kundys, A., Plichta, A., Florjańczyk, Z., Frydrych, A., & Żurawski, K. (2015) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27576 · Cited by 23
Zhao, Y., Lang, X., Pan, H., Wang, Y., Yang, H., Zhang, H., Zhang, H., & Dong, L. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24171 · Cited by 23
Li, X., Zhang, S., Wang, H., Zhang, C., Pang, J., Mu, J., Ma, G., Wang, G., & Jiang, Z. (2011) · Polymer International · doi:10.1002/pi.2987 · Cited by 22
Zuza, E., Lejardi, A., Ugartemendia, J. M., Monasterio, N., Meaurio, E., & Sarasua, J.-R. (2008) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200800443 · Cited by 22
Yeh, J., Tsou, C., Li, Y., Xiao, H., Wu, C.-S., Chai, W., Lai, Y., & Wang, C. (2012) · Journal of Polymer Research · doi:10.1007/s10965-011-9766-4 · Cited by 22
Masutani, K., & Kimura, Y. (2016) · Polymer International · doi:10.1002/pi.5172 · Cited by 22
Xue, S., Jia, P., Ren, Q., Liu, X., Lee, R. E., Jr., & Zhai, W. (2016) · Journal of Cellular Plastics · doi:10.1177/0021955x16670587 · Cited by 23
Effect of zinc phenylphosphonate on the crystallization behavior of poly( l ‐lactide)
Wu, N., & Wang, H. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39471 · Cited by 22
Dacko, P., Kowalczuk, M. M., Janeczek, H., & Sobota, M. (2006) · Macromolecular Symposia · doi:10.1002/masy.200690098 · Cited by 21
Self-citationBlázquez‐Blázquez, E., Barranco‐García, R., Díez‐Rodríguez, T. M., Cerrada, M. L., & Pérez, E. (2023) · Polymers · doi:10.3390/polym15030624 · Cited by 20
Preparation and characterization of poly(ethylene carbonate)/poly(lactic acid) blends
Ramlee, N. A., & Tominaga, Y. (2018) · Journal of Polymer Research · doi:10.1007/s10965-018-1451-4 · Cited by 19
Investigating Rheological, Morphological and Mechanical Properties of PBS/PBAT blends
Boonprasertpoh, A., Pentrakoon, D., & Junkasem, J. (2017) · Journal of Metals Materials and Minerals · doi:10.14456/jmmm.2017.1 · Cited by 18
Influence of acrylic impact modifier on plasticized polylactide blown films
Zhang, H., Liang, H., Bian, J., Hao, Y., Han, L., Wang, X., Zhang, G., Liu, S., & Dong, L. (2013) · Polymer International · doi:10.1002/pi.4615 · Cited by 21
Zeng, C., Zhang, N., & Ren, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36283 · Cited by 18
Zhao, J., Li, X., Pan, H., Ai, X., Yang, H., Zhang, H., Gao, G., & Dong, L. (2019) · Polymer Bulletin · doi:10.1007/s00289-019-02942-5 · Cited by 18
Tien, N.-D., Sasaki, S., Masunaga, H., Shimizu, N., Igarashi, N., & Sakurai, S. (2014) · Polymer · doi:10.1016/j.polymer.2014.03.048 · Cited by 17
Woo, E. M., Hsieh, Y., Chen, W., Kuo, N., & Wang, L. (2010) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21999 · Cited by 16
Properties and weldability of plasticized polylactic acid films
Stoehr, N., Baudrit, B., Haberstroh, E., Nase, M., Heidemeyer, P., & Bastian, M. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40394 · Cited by 16
Mechanical characterization and damage events of flax fabric-reinforced biopolymer composites
Chilali, A., Assarar, M., Zouari, W., Kébir, H., & Ayad, R. (2019) · Polymers and Polymer Composites · doi:10.1177/0967391119895744 · Cited by 15
Wu, N., & Zhang, H. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42554 · Cited by 14
Hao, Y., Yang, H., Zhang, G., Zhang, H., Gao, G., & Dong, L. (2015) · Chinese Journal of Polymer Science · doi:10.1007/s10118-015-1714-z · Cited by 14
Qin, W., Qiu, Y., He, H., Guo, B., & Li, P. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.133758 · Cited by 13
Yeh, J., Tsou, C., Lu, W., Li, Y., Xiao, H. W., Huang, C., Chen, K., Wu, C.-S., & Chai, W. (2010) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21954 · Cited by 15
Polyhydroxyalkanoate Blends and Composites
Chen, G., & Luo, R. (2008) · Wiley eBooks · doi:10.1002/9780470391501.ch8 · Cited by 12
Goh, S. H. (2014) · Springer eBooks · doi:10.1007/978-94-007-6064-6_24 · Cited by 12
Zięba, M., Włodarczyk, J., Gupta, A., Pastusiak, M., Chaber, P., Janeczek, H., Musioł, M., Sikorska, W., Kaczmarczyk, B., Radecka, I., et al. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110334 · Cited by 12
Self-citationBiodegradable Polylactide‐Based Composites
Zuza, E., Meaurio, E., & Sarasua, J.-R. (2016) · InTech eBooks · doi:10.5772/65468 · Cited by 12
Phase diagrams in blends of poly(3-hydroxybutyric acid) with various aliphatic polyesters
Hsieh, Y., & Woo, E. M. (2011) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2011.56 · Cited by 11
Aromatic/Aliphatic Polyester Blends
Quental, A. C., de Carvalho, F. P., Rezende, M. L., Rosa, D. D. S., & Felisberti, M. I. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0183-2 · Cited by 11
Wu, N., Ding, M., Zhang, J., & Lin, R. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.06.001 · Cited by 10
Islam, M. S., Ahmed-Haras, M. R., Kao, N., Gupta, R. K., Bhattacharya, S. N., & Islam, M. N. (2019) · Research Communication in Engineering Science & Technology · doi:10.22597/rcest.v2.63 · Cited by 10
Metadata
- Authors
- Focarete, M. L., Scandola, M., Dobrzynski, P., & Kowalczuk, M.
- Affiliations
- Institute of Organic Synthesis and Photoreactivity (IT)
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-09-25
- Volume
- 35
- Issue
- 22
- Pages
- 8472-8477
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2083360677
- Cited by
- 119
- References
- 27
- Citations by year
- 2025: 1 · 2024: 3 · 2023: 2 · 2022: 2 · 2021: 2 · 2019: 4 · 2018: 2 · 2017: 4 · 2016: 5 · 2015: 11 · 2014: 10 · 2013: 8 · 2012: 12
- FWCI
- 1.93
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- polyhydroxybutyrate, poly(L-lactide-co-glycolide), poly(L-lactic acid), polymer blends, miscibility, phase separation, solubility limit, mechanical properties, tenacity, biodegradable polymers, polymer blend films
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.