CoChat

Tailored Phase Transitions via Mixed-Mesogen Liquid Crystalline Polymers with Silicon-Based Spacers

Rousseau, Ingrid A., Qin, Haihu, Mather, Patrick T. · 2005 · Macromolecules
Cited by 39

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

Control over thermotropic phase behavior in low- T g main-chain liquid crystalline polymers (LCPs) is desired for a variety of applications, including soft actuation when cross-linked. Here, we describe the synthesis of new silicon-based main-chain LCPs, including homopolymers, blends, and copolymers, with tunable clearing temperatures as governed by their chemical composition. Two mesogenic groups, namely, 1,4-bis[4-(4-pentenyloxy)benzoyl]hydroquinone ( M 1 ) and 2- tert -butyl-1,4-bis[4-(4-pentenyloxy)benzoyl]hydroquinone ( M 2 ), were polymerized with various silicon-based flexible spacers, specifically, 1,4-bis(dimethylsilyl)benzene ( S 1 ), 1,1,3,3,5,5-hexamethyltrisiloxane ( S 2 ), and hydride-terminated poly(dimethylsiloxane) (DP = 8) ( S 3 ) spacers, following routine hydrosilation reaction techniques. These mesogens and flexible spacers were chosen so that both copolymerization and blending of homopolymers would allow for potential tailoring of phase behavior. Indeed, despite their similar chemical structure, the clearing transition temperatures of M 1 and M 2 differ dramatically (Δ T NI = 140 °C), while the silicon-based spacers offer accessibility to a large range of molecular flexibility. High-molecular-weight LCPs were successfully prepared using Pt-catalyzed addition polymerization. Interestingly, the polymers exhibited wide liquid crystalline windows with relatively high degree of order (smectic phases) except for the S 1 -based blends, which, in addition to a smectic phase, also displayed a narrow nematic phase. As expected, a drastic decrease of the glass transition temperature arose on polymerizing with longer, more flexible spacers, from about 56 to −17 °C. Finally, in comparing the two approaches to phase behavior tailoring, namely, blending vs copolymerization, the former led to apparently immiscible systems with constant isotropization temperatures, while the latter yielded homogeneous, single-phased materials with tunable isotropization temperatures dictated by the M 1 / M 2 ratio of the copolymers.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ma048327y

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 39

Metadata

Authors
Rousseau, I. A., Qin, H., & Mather, P. T.
Venue
Macromolecules
Published
2005-04-22
Volume
38
Issue
10
Pages
4103-4113
ISSN
  • 0024-9297 (ISSN-L)
  • 1520-5835
OpenAlex
W2158540905
Cited by
39
References
1
FWCI
1.34
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.