Network Stretching, Slip Processes, and Fragmentation of Crystallites during Uniaxial Drawing of Polyethylene and Related Copolymers. A Comparative Study
The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Abstract
When polyethylene (PE) is deformed to large strains, the stress originates from both the viscous forces associated with the plastic deformation of the crystallites by slip and fragmentation processes and the entropic elastic forces arising from the stretching of the entangled amorphous regions. Relative weights of the different processes change with the crystallinity. The dependencies were analyzed in a comprehensive study on a series of samples encompassing a large range of crystallinities: PE, low-density PE (LDPE), and ethylene−vinylacetate copolymers. The comparison was based on measured true stress−strain curves for constant strain rates. For the samples with higher crystallinity, which show a necking, this was achieved by employing a video-controlled tensile testing machine. Recovery properties of the sample were studied in step-cycle runs, where the load was applied stepwise and interrupted after each step by an unloading−reloading loop. Simultaneous with the mechanical testing, the related texture changes were determined by a measurement of the WAXS patterns. In spite of the large changes in the gross mechanical properties from solid- to rubberlike, there exists a common general scheme for the deformation behavior. For all samples, one finds four characteristic points where the differential compliance changes. They may be associated with (1) the onset of isolated slip processes, (2) a change into a collective activity of the slips, (3) the beginning of crystallite fragmentation, and (4) chain disentanglement resulting in a finite truly irreversible deformation. When the crystallinity is increased, the stresses at the four transition points also increase. The related strains, however, remain essentially constant. Crystal textures are also a function of the imposed strain only, the dependencies being common for all samples. Experiments support the novel picture of a granular substructure of the crystalline lamellae as a basic structural feature. Block slips with the three surfaces as slip planes enable the system to easily react on each imposed strain in a well-defined way.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The curve for X-direction elongation in figure 2 has the same typical shape as those obtained from laboratory experiments on PE, for instance the experiments using strain rates between 10-4 and 10-2 s-1 performed by Hiss et al [17] and Addiego et al [18].”
In the citing paper
“Hiss et al [17] and Addiego et al [18] also found that increasing strain rate increases the yield stress.”
In the citing paper
“Moreover, the curve of virgin PE agrees quite well with the true stress-true strain curves obtained in tensile deformation mode for polyethylene of similar molecular characteristics [4,45].”
From Erosion of the molecular network in the amorphous layers of polyethylene upon high-strain deformation (2016) · cites this paper as [4]
In the citing paper
“This transition was postulated to be a result of intensified crystal fragmentation and presumably chain disentanglement beginning in amorphous phase that should lead to a partial disintegration of the molecular network [4].”
From Erosion of the molecular network in the amorphous layers of polyethylene upon high-strain deformation (2016) · cites this paper as [4]
In the citing paper
“The same is actually true for semicrystalline polymers, since their deformation can be considered as a simultaneous deformation of two co-continuous interlaced network-like structures: a skeleton made up of crystallites interconnected with the interlamellar layers of entangled amorphous phase [4]”
From Erosion of the molecular network in the amorphous layers of polyethylene upon high-strain deformation (2016) · cites this paper as [4]
3 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Strobl, G. R. (1996) · Springer eBooks · doi:10.1007/978-3-662-03243-5 · Cited by 1,497
Self-citationMolecular model of drawing polyethylene and polypropylene
Peterlin, A. (1971) · Journal of Materials Science · doi:10.1007/bf00550305 · Cited by 987
The use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics
Haward, R. N., & Thackray, G. (1968) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1968.0029 · Cited by 646
Deformation mechanisms in crystalline polymers
Bowden, P. B., & Young, R. J. (1974) · Journal of Materials Science · doi:10.1007/bf00540553 · Cited by 551
Determination of the plastic behaviour of solid polymers at constant true strain rate
G'sell, C., & Jonas, J. J. (1979) · Journal of Materials Science · doi:10.1007/bf00772717 · Cited by 439
Strain hardening of thermoplastics
Haward, R. N. (1993) · Macromolecules · doi:10.1021/ma00074a006 · Cited by 326
The necking and cold-drawing of rigid plastics
Vincent, P. I. (1960) · Polymer · doi:10.1016/0032-3861(60)90003-3 · Cited by 320
Video-controlled tensile testing of polymers and metals beyond the necking point
G'Sell, C., Hiver, J. M., Dahoun, A., & Souahi, A. (1992) · Journal of Materials Science · doi:10.1007/bf01105270 · Cited by 299
Phase Transformation and Deformation Processes in Oriented Polyethylene
Seto, T., Hara, T., & Tanaka, K. (1968) · Japanese Journal of Applied Physics · doi:10.1143/jjap.7.31 · Cited by 266
Polymer deformation in terms of spherulites
Hay, I. L., & Keller, A. (1965) · Kolloid-Zeitschrift & Zeitschrift für Polymere · doi:10.1007/bf01500379 · Cited by 255
Hasan, O. A., Boyce, M. C., Li, X. S., & Berko, S. (1993) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1993.090310207 · Cited by 254
Deformation mechanisms in oriented high-density polyethylene
Young, R. J., Bowden, P. B., Ritchie, J. M., & Rider, J. G. (1973) · Journal of Materials Science · doi:10.1007/bf00755579 · Cited by 204
Deformation processes in polyethylene interpreted in terms of crystal plasticity
Frank, F. C., Keller, A., O'connor, A., & Wills, H. H. (1958) · Philosophical Magazine · doi:10.1080/14786435808243227 · Cited by 199
Evolution of the crystalline texture of high-density polyethylene during uniaxial compression
Bartczak, Z., Cohen, R. E., & Argon, A. S. (1992) · Macromolecules · doi:10.1021/ma00044a034 · Cited by 171
Identification of structural processes in deformation of oriented polyethylene
Keller, A., & Pope, D. P. (1971) · Journal of Materials Science · doi:10.1007/bf00550302 · Cited by 161
Polanyi, M. (1921) · The European Physical Journal A · doi:10.1007/bf01332786 · Cited by 150
The role of recovery forces in the deformation of linear polyethylene
Fotheringham, D., & Cherry, B. W. (1978) · Journal of Materials Science · doi:10.1007/bf00544690 · Cited by 148
Hauser, G., Schmidtke, J., & Strobl, G. R. (1998) · Macromolecules · doi:10.1021/ma980453c · Cited by 142
Self-citationDouble yield point in polyethylene under tensile loading
Séguéla, R., & Rietsch, F. (1990) · Journal of Materials Science Letters · doi:10.1007/bf00722865 · Cited by 116
Hugel, T., Strobl, G. R., & Thomann, R. (1999) · Acta Polymerica · doi:10.1002/(sici)1521-4044(19990501)50:5/6<214::aid-apol214>3.0.co;2-i · Cited by 108
Self-citationTexture evolution in large strain simple shear deformation of high density polyethylene
Bartczak, Z., Argon, A. S., & Cohen, R. E. (1994) · Polymer · doi:10.1016/0032-3861(94)90905-9 · Cited by 100
Thermally stimulated shrinkage forces in oriented polymers: 1. Temperature dependence
Pakuła, T., & Trznadel, M. (1985) · Polymer · doi:10.1016/0032-3861(85)90221-6 · Cited by 92
Double yield points in polyethylene: Structural changes under tensile deformation
Brooks, N. W. J., Unwin, A. P., Duckett, R. A., & Ward, I. M. (1995) · Journal of Macromolecular Science Part B · doi:10.1080/00222349508219486 · Cited by 86
Shrinkage, shrinkage force and the structure of ultra high modulus polyethylenes
Capaccio, G., & Ward, I. M. (1982) · Colloid & Polymer Science · doi:10.1007/bf01447675 · Cited by 78
Kinetic model for tensile deformation of polymers. 2. Effect of entanglement spacing
Termonia, Y., & Smith, P. (1988) · Macromolecules · doi:10.1021/ma00185a051 · Cited by 77
Kanig, G. (1980) · Journal of Crystal Growth · doi:10.1016/0022-0248(80)90218-3 · Cited by 44
Lamellar separation during the deformation of high-density polyethylene
Petermann, J., & Schultz, J. M. (1978) · Journal of Materials Science · doi:10.1007/bf00739272 · Cited by 43
On molecular and textural reorientations in polyethylene caused by applied stress
Cowking, A., & Rider, J. G. (1969) · Journal of Materials Science · doi:10.1007/bf00549843 · Cited by 36
New insight in the level structure of
Foin, C., Farget, F., Gizon, A., Santos, D., Barnéoud, D., Genevey, J., Gizon, J., Paris, P., Ashgar, M., & Płochocki, A. (2000) · The European Physical Journal A · doi:10.1007/pl00013591 · Cited by 28
Gerrits, N. S. J. A., & Tervoort, Y. (1992) · Journal of Materials Science · doi:10.1007/bf01142059 · Cited by 18
Stability and Cold Drawing of Viscoelastic Bars
Bernstein, B. M., & Zapas, L. J. (1981) · Journal of Rheology · doi:10.1122/1.549610 · Cited by 18
Redrawing of oriented polyethylene film
Yamada, M., Miyasaka, K., & Ishikawa, K. (1971) · Journal of Polymer Science Part A-2 Polymer Physics · doi:10.1002/pol.1971.160090606 · Cited by 9
Metastable Partially Crystalline States
Strobl, G. R. (1997) · Springer eBooks · doi:10.1007/978-3-662-03488-0_4 · Cited by 6
Self-citation
Research works printed but not linked: 7
- Haward R., 1968, Proc. R. Soc. A, 302, 453
- Takahashi Y., 1988, Part B: Polym. Phys
- Bridgman P., 1944, Trans. Am. Soc. Met., 32, 553
- Hiss, R. Ph.D. Thesis, Freiburg, 1996.
- Gauthier C., 10th International Conference on Deformation, Yield and Fracture of Polymers; Institute of Materials: London
- Krigas T., 1985, J. Polym. Sci., 23, 509
- Kelly A., 1970, Crystallography of Crystal Defects
Cited by
Strobl, G. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.01.001 · Cited by 486
“The blocky substructure is fundamental for the deformation properties of semicrystalline polymers [34, 35 ].”
BackgroundSelf-citationRole of the Entangled Amorphous Network in Tensile Deformation of Semicrystalline Polymers
Men, Y., Rieger, J., & Strobl, G. (2003) · Physical Review Letters · doi:10.1103/physrevlett.91.095502 · Cited by 428
Self-citationChain Dimensions and Entanglement Spacings
Fetters, L. J., Lohse, D. J., & Colby, R. H. (2007) · Physical Properties of Polymers Handbook · doi:10.1007/978-0-387-69002-5_25 · Cited by 376
Cavitation during deformation of semicrystalline polymers
Pawlak, A., Galeski, A., & Rozanski, A. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.10.007 · Cited by 355
Plastic Deformation of Crystalline Polymers: The Role of Cavitation and Crystal Plasticity
Pawlak, A., & Galeski, A. (2005) · Macromolecules · doi:10.1021/ma050842o · Cited by 314
Metadata
- Authors
- Hiss, R., Hobeika, S., Lynn, C., & Strobl, G.
- Affiliations
- University of Freiburg (DE)
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1999-06-01
- Volume
- 32
- Issue
- 13
- Pages
- 4390-4403
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1964100411
- Semantic Scholar
- 001144c6520c7f808e72de547a96271a0ae7d26f
- Cited by
- 540
- References
- 32
- Citations by year
- 2026: 25 · 2025: 23 · 2024: 29 · 2023: 23 · 2022: 19 · 2021: 26 · 2020: 23 · 2019: 27 · 2018: 40 · 2017: 29 · 2016: 19 · 2015: 15 · 2014: 18 · 2013: 24 · 2012: 22
- FWCI
- 7.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- FreiDok plus (Universitätsbibliothek Freiburg) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Keywords
- polyethylene, low-density polyethylene, uniaxial drawing, chain disentanglement, crystallinity, necking, true stress-strain curves, crystallographic texture, irreversible deformation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.