The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Graphene-Based Three-Dimensional Hierarchical Sandwich-type Architecture for High-Performance Li/S Batteries
Abstract
A multiwalled carbon nanotube/sulfur (MWCNT@S) composite with core-shell structure was successfully embedded into the interlay galleries of graphene sheets (GS) through a facile two-step assembly process. Scanning and transmission electron microscopy images reveal a 3D hierarchical sandwich-type architecture of the composite GS-MWCNT@S. The thickness of the S layer on the MWCNTs is ~20 nm. Raman spectroscopy, X-ray diffraction, thermogravimetric analysis, and energy-dispersive X-ray analysis confirm that the sulfur in the composite is highly crystalline with a mass loading up to 70% of the composite. This composite is evaluated as a cathode material for Li/S batteries. The GS-MWCNT@S composite exhibits a high initial capacity of 1396 mAh/g at a current density of 0.2C (1C = 1672 mA/g), corresponding to 83% usage of the sulfur active material. Much improved cycling stability and rate capability are achieved for the GS-MWCNT@S composite cathode compared with the composite lacking GS or MWCNT. The superior electrochemical performance of the GS-MWCNT@S composite is mainly attributed to the synergistic effects of GS and MWCNTs, which provide a 3D conductive network for electron transfer, open channels for ion diffusion, strong confinement of soluble polysulfides, and effective buffer for volume expansion of the S cathode during discharge.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Cited by
Flexible MXene/Carbon Nanotube Composite Paper with High Volumetric Capacitance
Zhao, M., Ren, C. E., Ling, Z., Lukatskaya, M. R., Zhang, C., Van Aken, K. L., Barsoum, M. W., & Gogotsi, Y. (2015) · Advanced Materials · doi:10.1002/adma.201404140 · Cited by 1,426
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Graphene and Graphene‐Based Materials for Energy Storage Applications
Zhu, J., Yang, D., Yin, Z., Yan, Q., & Zhang, H. (2014) · Small · doi:10.1002/smll.201303202 · Cited by 825
Zheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Seh, Z. W., Yu, J. H., Li, W., Hsu, P.-C., Wang, H., Sun, Y., Yao, H., Zhang, Q., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6017 · Cited by 600
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Tang, C., Zhang, Q., Zhao, M., Huang, J., Cheng, X., Tian, G., Peng, H., & Wei, F. (2014) · Advanced Materials · doi:10.1002/adma.201401243 · Cited by 586
Lei, T., Chen, W., Lv, W., Huang, J., Zhu, J., Chu, J., Yan, C., Wu, C., Yan, Y., He, W., et al. (2018) · Joule · doi:10.1016/j.joule.2018.07.022 · Cited by 493
Zhang, Z., Kong, L., Liu, S., Li, G., & Gao, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602543 · Cited by 472
Burning lithium in CS2 for high-performing compact Li2S–graphene nanocapsules for Li–S batteries
Tan, G., Xu, R., Xing, Z., Yuan, Y., Lu, J., Wen, J., Liu, C., Ma, L., Zhan, C., Liu, Q., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.90 · Cited by 444
Self-citationGraphene-based materials for electrochemical energy storage devices: Opportunities and challenges
Lv, W., Li, Z., Deng, Y., Yang, Q.-H., & Kang, F. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.10.002 · Cited by 433
Solvent-Dictated Lithium Sulfur Redox Reactions: An Operando UV–vis Spectroscopic Study
Zou, Q., & Lu, Y.-C. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00228 · Cited by 411
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Zhou, W., Xiao, X., Cai, M., & Yang, L. (2014) · Nano Letters · doi:10.1021/nl502238b · Cited by 382
Zhu, J., Tang, Y., Yang, C., Wang, F., & Cao, M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0981605jes · Cited by 377
Porous Carbon Composites for Next Generation Rechargeable Lithium Batteries
Liu, H., Liu, X., Li, W., Guo, X., Wang, Y., Wang, G., & Zhao, D. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700283 · Cited by 356
Design Considerations for Unconventional Electrochemical Energy Storage Architectures
Vlad, A., Singh, N., Galande, C., & Ajayan, P. M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402115 · Cited by 346
A Revolution in Electrodes: Recent Progress in Rechargeable Lithium–Sulfur Batteries
Fang, X., & Peng, H. (2015) · Small · doi:10.1002/smll.201402354 · Cited by 346
Xu, J., Ma, J., Fan, Q., Guo, S., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201606454 · Cited by 319
Nazar, L. F., Cuisinier, M., & Pang, Q. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.86 · Cited by 314
Monodispersed Sulfur Nanoparticles for Lithium–Sulfur Batteries with Theoretical Performance
Chen, H., Wang, C., Dong, W., Lu, W., Du, Z., & Chen, L. (2015) · Nano Letters · doi:10.1021/nl504963e · Cited by 304
Wang, H., Yuan, X., Zeng, G., Wu, Y., Liu, Y., Jiang, Q., & Gu, S. (2015) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2015.04.005 · Cited by 302
A Facile Layer‐by‐Layer Approach for High‐Areal‐Capacity Sulfur Cathodes
Qie, L., & Manthiram, A. (2015) · Advanced Materials · doi:10.1002/adma.201405689 · Cited by 290
Ternary Hybrid Material for High-Performance Lithium–Sulfur Battery
Fan, Q., Liu, W., Weng, Z., Sun, Y., & Wang, H. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b07071 · Cited by 264
Rechargeable lithium batteries and beyond: Progress, challenges, and future directions
Amine, K., Kanno, R., & Tzeng, Y. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.62 · Cited by 262
Self-citation
Metadata
- Authors
- Chen, R., Zhao, T., Lu, J., Wu, F., Li, L., Chen, J., Tan, G., Ye, Y., & Amine, K.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-09-13
- Volume
- 13
- Issue
- 10
- Pages
- 4642-4649
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2009640207
- Cited by
- 401
- References
- 3
- FWCI
- 33.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.