The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Nanocrystalline Rutile Electron Extraction Layer Enables Low-Temperature Solution Processed Perovskite Photovoltaics with 13.7% Efficiency
Open accessAbstract
We demonstrate low-temperature (70 °C) solution processing of TiO2/CH3NH3PbI3 based solar cells, resulting in impressive power conversion efficiency (PCE) of 13.7%. Along with the high efficiency, a strikingly high open circuit potential (VOC) of 1110 mV was realized using this low-temperature chemical bath deposition approach. To the best of our knowledge, this is so far the highest VOC value for solution-processed TiO2/CH3NH3PbI3 solar cells. We deposited a nanocrystalline TiO2 (rutile) hole-blocking layer on a fluorine-doped tin oxide (FTO) conducting glass substrate via hydrolysis of TiCl4 at 70 °C, forming the electron selective contact with the photoactive CH3NH3PbI3 film. We find that the nanocrystalline rutile TiO2 achieves a much better performance than a planar TiO2 (anatase) film prepared by high-temperature spin coating of TiCl4, which produces a much lower PCE of 3.7%. We attribute this to the formation of an intimate junction of large interfacial area between the nanocrystalline rutile TiO2 and the CH3NH3PbI3 layer, which is much more effective in extracting photogenerated electrons than the planar anatase film. Since the complete fabrication of the solar cell is carried out below 100 °C, this method can be easily extended to plastic substrates.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Self-citationOrganometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Self-citationHagfeldt, A., Boschloo, G., Sun, L., Kloo, L., & Pettersson, H. (2010) · Chemical Reviews · doi:10.1021/cr900356p · Cited by 8,931
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationEfficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Self-citationYella, A., Lee, H.-W., Tsao, H. N., Yi, C., Chandiran, A. K., Nazeeruddin, M. K., Diau, E. W.-G., Yeh, C.-Y., Zakeeruddin, S. M., & Grätzel, M. (2011) · Science · doi:10.1126/science.1209688 · Cited by 5,977
Self-citationStoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Cited by
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
The light and shade of perovskite solar cells
Grätzel, M. (2014) · Nature Materials · doi:10.1038/nmat4065 · Cited by 2,258
Self-citationCheng, L., Xiang, Q., Liao, Y., & Zhang, H. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03640j · Cited by 1,733
Organohalide lead perovskites for photovoltaic applications
Gao, P., Grätzel, M., & Nazeeruddin, M. K. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00942h · Cited by 1,410
Self-citationA Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Scalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
Hole‐Transport Materials for Perovskite Solar Cells
Calió, L., Kazim, S., Grätzel, M., & Ahmad, S. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201601757 · Cited by 1,004
Self-citationHan, Y., Meyer, S., Dkhissi, Y., Weber, K., Pringle, J. M., Bach, U., Spiccia, L., & Cheng, Y.-B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00358j · Cited by 1,002
Wu, Y., Islam, A., Yang, X., Qin, C., Liu, J., Zhang, K., Peng, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01624f · Cited by 887
Chueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
Origin of J–V Hysteresis in Perovskite Solar Cells
Chen, B., Yang, M., Priya, S., & Zhu, K. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00215 · Cited by 749
Heterojunction Modification for Highly Efficient Organic–Inorganic Perovskite Solar Cells
Wojciechowski, K., Stranks, S. D., Abate, A., Sadoughi, G., Sadhanala, A., Kopidakis, N., Rumbles, G., Li, C.-Z., Friend, R. H., Jen, A. K.-Y., et al. (2014) · ACS Nano · doi:10.1021/nn505723h · Cited by 677
Review on the Application of SnO2 in Perovskite Solar Cells
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802757 · Cited by 653
Perovskite-based solar cells: impact of morphology and device architecture on device performance
Salim, T., Sun, S., Abe, Y., Krishna, A., Grimsdale, A. C., & Lam, Y. M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05226a · Cited by 602
Recent progress in electron transport layers for efficient perovskite solar cells
Yang, G., Tao, H., Qin, P., Ke, W., & Fang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09011c · Cited by 579
Wang, L., McCleese, C., Kovalsky, A., Zhao, Y., & Burda, C. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504632z · Cited by 571
Zhang, H., Cheng, J., Lin, F., He, H., Mao, J., Wong, K. S., Jen, A. K.-Y., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b07043 · Cited by 560
Recent progress of inorganic perovskite solar cells
Tai, Q., Tang, K.-C., & Yan, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01479a · Cited by 528
Tress, W., Marinova, N., Inganäs, O., Nazeeruddin, M. K., Zakeeruddin, S. M., & Graetzel, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400812 · Cited by 522
Self-citationEfficient and Uniform Planar‐Type Perovskite Solar Cells by Simple Sequential Vacuum Deposition
Chen, C., Kang, H., Hsiao, S., Yang, P., Chiang, K., & Lin, H. (2014) · Advanced Materials · doi:10.1002/adma.201402461 · Cited by 510
Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers
Kim, H., Lim, K.-G., & Lee, T.-W. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02194d · Cited by 507
Current status of electron transport layers in perovskite solar cells: materials and properties
Mahmood, K., Sarwar, S., & Mehran, M. T. (2017) · RSC Advances · doi:10.1039/c7ra00002b · Cited by 468
Philippe, B., Park, B.-W., Lindblad, R., Oscarsson, J., Ahmadi, S., Johansson, E. M. J., & Rensmo, H. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00348 · Cited by 462
Yu, Z., & Sun, L. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500213 · Cited by 462
Wei, Z., Chen, H., Yan, K., & Yang, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408638 · Cited by 456
Organohalide Lead Perovskites for Photovoltaic Applications
Yusoff, A. R. B. M., & Nazeeruddin, M. K. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02893 · Cited by 439
Self-citationRajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Progress, challenges and perspectives in flexible perovskite solar cells
Di Giacomo, F., Fakharuddin, A., Jose, R., & Brown, T. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01137c · Cited by 428
Effect of CH3NH3PbI3thickness on device efficiency in planar heterojunction perovskite solar cells
Liu, D., Gangishetty, M. K., & Kelly, T. L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02637c · Cited by 393
Razza, S., Di Giacomo, F., Matteocci, F., Cinà, L., Palma, A. L., Casaluci, S., Cameron, P., D'Epifanio, A., Licoccia, S., Reale, A., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.008 · Cited by 384
Agarwala, P., & Kabra, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08449d · Cited by 384
Efficient planar heterojunction perovskite solar cells employing graphene oxide as hole conductor
Wu, Z., Bai, S., Xiang, J., Yuan, Z., Yang, Y., Cui, W., Gao, X., Liu, Z., Jin, Y., & Sun, B. (2014) · Nanoscale · doi:10.1039/c4nr03181d · Cited by 378
Song, J., Zheng, E., Bian, J., Wang, X.-F., Tian, W., Sanehira, Y., & Miyasaka, T. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01207d · Cited by 366
14.1% CsPbI3 Perovskite Quantum Dot Solar Cells via Cesium Cation Passivation
Ling, X., Zhou, S., Yuan, J., Shi, J., Qian, Y., Larson, B. W., Zhao, Q., Qin, C., Li, F., Shi, G., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900721 · Cited by 343
Perovskite Solar Cells: Influence of Hole Transporting Materials on Power Conversion Efficiency
Ameen, S., Rub, M. A., Kosa, S. A., Alamry, K. A., Akhtar, M. S., Shin, H., Seo, H., Asiri, A. M., & Nazeeruddin, M. K. (2016) · ChemSusChem · doi:10.1002/cssc.201501228 · Cited by 327
Self-citationHadadian, M., Correa‐Baena, J., Goharshadi, E. K., Ummadisingu, A., Seo, J., Luo, J., Gholipour, S., Zakeeruddin, S. M., Saliba, M., Abate, A., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602785 · Cited by 327
Self-citationTuning Perovskite Morphology by Polymer Additive for High Efficiency Solar Cell
Chang, C.-Y., Chu, C.-Y., Huang, Y.-C., Huang, C.-W., Chang, S.-Y., Chen, C.-A., Chao, C.-Y., & Su, W.-F. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00052 · Cited by 325
Pseudohalide‐Induced Moisture Tolerance in Perovskite CH3NH3Pb(SCN)2I Thin Films
Jiang, Q., Rebollar, D., Gong, J., Piacentino, E. L., Zheng, C., & Xu, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503038 · Cited by 310
Cost-efficient clamping solar cells using candle soot for hole extraction from ambipolar perovskites
Wei, Z., Yan, K., Chen, H., Yi, Y., Zhang, T., Long, X., Li, J., Zhang, L., Wang, J., & Yang, S. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01983k · Cited by 299
Chen, C.-W., Hsiao, S.-Y., Chen, C.-Y., Kang, H.-W., Huang, Z.-Y., & Lin, H.-W. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05237d · Cited by 292
Metal Oxide Charge Transport Layers for Efficient and Stable Perovskite Solar Cells
Shin, S. S., Lee, S. J., & Seok, S. I. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900455 · Cited by 283
An Optically Transparent Iron Nickel Oxide Catalyst for Solar Water Splitting
Morales-Guio, C. G., Mayer, M. T., Yella, A., Tilley, S. D., Grätzel, M., & Hu, X. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b05544 · Cited by 278
Self-citationThe architecture of the electron transport layer for a perovskite solar cell
Mohamad Noh, M. F., Teh, C. H., Daik, R., Lim, E. L., Yap, C. C., Ibrahim, M. A., Ahmad Ludin, N., Mohd Yusoff, A. R. B., Jang, J., & Mat Teridi, M. A. (2018) · Journal of Materials Chemistry C · doi:10.1039/c7tc04649a · Cited by 262
Jung, J. W., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500486 · Cited by 256
Kong, W., Ye, Z., Qi, Z., Zhang, B., Wang, M., Rahimi-Iman, A., & Wu, H. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp02605a · Cited by 253
Metadata
- Authors
- Yella, A., Heiniger, L.-P., Gao, P., Nazeeruddin, M. K., & Grätzel, M.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-04-02
- Volume
- 14
- Issue
- 5
- Pages
- 2591-2596
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2090775216
- Cited by
- 430
- References
- 29
- FWCI
- 36.26
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.