Nanomaterials in the Construction Industry: A Review of Their Applications and Environmental Health and Safety Considerations
The DOI matches its Crossref record; 134 of the 134 references it cites were found in a registry or an index.
Abstract
The extraordinary chemical and physical properties of materials at the nanometer scale enable novel applications ranging from structural strength enhancement and energy conservation to antimicrobial properties and self-cleaning surfaces. Consequently, manufactured nanomaterials (MNMs) and nanocomposites are being considered for various uses in the construction and related infrastructure industries. To achieve environmentally responsible nanotechnology in construction, it is important to consider the lifecycle impacts of MNMs on the health of construction workers and dwellers, as well as unintended environmental effects at all stages of manufacturing, construction, use, demolition, and disposal. Here, we review state-of-the-art applications of MNMs that improve conventional construction materials, suggest likely environmental release scenarios, and summarize potential adverse biological and toxicological effects and their mitigation. Aligned with multidisciplinary assessment of the environmental implications of emerging technologies, this review seeks to promote awareness of potential benefits of MNMs in construction and stimulate the development of guidelines to regulate their use and disposal to mitigate potential adverse effects on human and environmental health.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Once nanomaterials are released into the environment they may experience distinctive chemical, biological, and physical transformations, which may result in a change in their properties [8].”
From Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use (2019) · cites this paper as [8]
Citations
Cites
Daniel, M.-C., & Astruc, D. (2004) · Chemical Reviews · doi:10.1021/cr030698+ · Cited by 12,446
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays
Wang, Z. L., & Song, J. (2006) · Science · doi:10.1126/science.1124005 · Cited by 7,922 · cited 1×
“gated by using QD-based light-emitting diodes (LEDs)(106) and CNT or ZnO nanowire-based sensors.(112,113)”
MethodRoom-temperature transistor based on a single carbon nanotube
Tans, S. J., Verschueren, A. R. M., & Dekker, C. (1998) · Nature · doi:10.1038/29954 · Cited by 5,425 · cited 1×
“The physical and chemical properties unique to the nanoscale can lead to remarkable efficacy enhancement in (photo)catalysis, (thermal and electrical) conductivity, mechanical strength, and optical sensitivity, enabling applications such as catalysts, electronic and energy storage devices, advanced mechanical material…”
BackgroundProbing the Cytotoxicity of Semiconductor Quantum Dots
Derfus, A. M., Chan, W. C. W., & Bhatia, S. N. (2004) · Nano Letters · doi:10.1021/nl0347334 · Cited by 3,391
Nanomaterials in the environment: Behavior, fate, bioavailability, and effects
Klaine, S. J., Alvarez, P. J. J., Batley, G. E., Fernandes, T. F., Handy, R. D., Lyon, D. Y., Mahendra, S., McLaughlin, M. J., & Lead, J. R. (2008) · Environmental Toxicology and Chemistry · doi:10.1897/08-090.1 · Cited by 2,764
Self-citationA Toxicologic Review of Quantum Dots: Toxicity Depends on Physicochemical and Environmental Factors
Hardman, R. (2006) · Environmental Health Perspectives · doi:10.1289/ehp.8284 · Cited by 2,303
The potential environmental impact of engineered nanomaterials
Colvin, V. L. (2003) · Nature Biotechnology · doi:10.1038/nbt875 · Cited by 2,158
Luminescent quantum dots for multiplexed biological detection and imaging
Chan, W. C. W., Maxwell, D. J., Gao, X., Bailey, R. E., Han, M., & Nie, S. (2002) · Current Opinion in Biotechnology · doi:10.1016/s0958-1669(02)00282-3 · Cited by 2,068
Cytotoxicity of Colloidal CdSe and CdSe/ZnS Nanoparticles
Kirchner, C., Liedl, T., Kudera, S., Pellegrino, T., Muñoz Javier, A., Gaub, H. E., Stölzle, S., Fertig, N., & Parak, W. J. (2005) · Nano Letters · doi:10.1021/nl047996m · Cited by 1,619
Research works printed but not linked: 14
- Sobolev K., 2005, Am. Ceram. Soc. Bull., 84, 16
- Saafi M., 2005, Concr. Int., 27, 28
- Holman M., 2007, ICON Nanomaterial Environmental Health and Safety Research Needs Assessment
- Lee J., 2009, Nanotechnology in Construction - 3, 1
- Song G. B., 2008, Smart Mater. Struct., 17, 1
- Rana A. K., 2009, Int. J. Recent Trends Eng., 1, 46
- Guskos N., 2010, Rev. Adv. Mater. Sci., 23, 113
- Murbach D. M., 2008, Epidemiology, 19, S256
- Lyon D. Y., 2007, Chem. Res. Toxicol., 20, 1991
- Silica, Some Silicates, Coal Dust and para-Aramid Fibrils. InIARC Monographs on the Evaluation of Carcinogenic Risks to Humans;International Agency for Research on Cancer World Health Organization:Lyon, France, 1997; Vol.68, p41.
- Cha E., K., 2007, J. Microbiol. Biotechnol., 17, 1573
- Knepper T. P., 2003, Wilson & Wilson’s Analytical Chemistry, 2
- Gerasimov V. V., 2004, Glass Ceram., 61, 25
- Lucarelli M., 2004, Eur. Cytokine Network, 15, 339
Cited by
Items 601–700 of 750
Role of Nanostructured Materials Toward Remediation of Heavy Metals/Metalloids
Bagbi, Y., Pandey, A., & Solanki, P. R. (2017) · Advanced structured materials · doi:10.1007/978-981-10-6214-8_3 · Cited by 3
Next-generation nanomaterials for environmental industries: Prospects and challenges
Shelte, A. R., & Pratihar, S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-823137-1.00015-4 · Cited by 3
Potential Environmental Impacts of Nanoparticles Used in Construction Industry
Gupta, A. D., & Patil, S. Z. (2021) · Springer eBooks · doi:10.1007/978-3-030-76073-1_10 · Cited by 4
Nanotechnology Applications in the Construction Industry
Mehrabian, S. (2013) · Cited by 3
Sajadi, S. M., Pirouei, M., Salih, N. A. M., Kolo, K., & Hamad, S. M. (2020) · Environmental Sciences Europe · doi:10.1186/s12302-020-0293-y · Cited by 3
Toxicity and Environmental Risks of Nanomaterials: An Update
Ray, P. C., Singh, A., Senapati, D., Fan, Z., & Yu, H. (2013) · Wiley eBooks · doi:10.1002/9781118451915.ch42 · Cited by 3
Qadir, A., Ali, A., & Singh, T. (2024) · Qeios · doi:10.32388/rixy86 · Cited by 8
Rhiem, S., & Schäffer, A. (2014) · RWTH Publications (RWTH Aachen) · Cited by 4
Selim, E. A. B., Ismail, R. M., & Ruban, S. (2024) · Electronic Journal of University of Aden for Basic and Applied Sciences · doi:10.47372/ejua-ba.2024.2.355 · Cited by 2
“Nanotechnology is developed as a new application used to overcome the problems of pollution and contamination in the environment [8].”
BackgroundLuminescent Erbium-Based Nanoparticles Synthesized by Pulsed Laser Ablation in Liquid
Almohammed, B., Barba, D. T., Haddad, E. I., Nechache, R., Rosei, F., & Vetrone, F. (2025) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.4c07101 · Cited by 3
Rangarajan, J., & Mathisekaran, R. (2025) · Matéria (Rio de Janeiro) · doi:10.1590/1517-7076-rmat-2025-0081 · Cited by 2
Vyas, T. K., & Vala, A. K. (2022) · Springer eBooks · doi:10.1007/978-3-030-34007-0_44-1 · Cited by 2
Transformation of zinc oxide nanoparticles in synthetic lung fluids
Hatch, A. C., Peloquin, D. M., Kumbar, A. S., Luxton, T. P., & Clar, J. G. (2022) · Journal of Nanoparticle Research · doi:10.1007/s11051-022-05527-y · Cited by 2
Hidayah, A. N., Triyono, D., Herbani, Y., Isnaeni, I., & Saleh, R. (2022) · AIP conference proceedings · doi:10.1063/5.0107398 · Cited by 4
Revealing the unseen: a bibliometric analysis of workplace safety
Abdullah, K. H., Roslan, M. F., Ishak, N. S., Ishak, N. S., Yahya, M. A., Hadi, H. R. A., & Rosaai, M. S. N. M. (2023) · Kontakt · doi:10.32725/kont.2023.038 · Cited by 10
Adsorption of Amino Acids on a Titania Surface
Vlasova, N. N., & Markitan, O. V. (2021) · Russian Journal of Physical Chemistry A · doi:10.1134/s0036024421010325 · Cited by 2
Gadag, P. R., Ghorpade, V. G., & Rao, H. S. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.09.344 · Cited by 2
Machine Learning in Prediction of Nanotoxicology
Li, M., Yu, F., Jia, Y., Sun, S., Li, X., Zhang, X., & Hu, X. (2023) · Computational methods in engineering & the sciences · doi:10.1007/978-3-031-20730-3_21 · Cited by 3
Structural and optical studies of nickel-cobalt-ferric oxides nanocomposite
Devadathan, D., & Raveendran, R. (2015) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/73/1/012020 · Cited by 2
Characterization of Nano Powder Incorporated for Building Applications
Abdul-Hamead, A. A., Othman, F. M., & Salih, M. M. (2015) · Engineering and Technology Journal · doi:10.30684/etj.2015.116257 · Cited by 2
Efeito da nanossílica sobe as propriedades mecânicas de concretos de alta resistência
STRAPASSON, H. V., ZICATTO, M., Vargas, M. Z., da Silva, C. V., & Lora, F. P. (2021) · CONCRETO & Construções · doi:10.4322/1809-7197.2021.103.0008 · Cited by 2
“Uma avaliação abrangente de seus efeitos na saúde humana e ambiental é essencial para o estabelecimento de regulamentos e diretrizes que permitam inúmeros benefícios aos nanomateriais, ao mesmo tempo que forneçam uma proteção adequada aos ecossistemas [2].”
BackgroundThe mechanisms involved in the synthesis of biogenic nanoparticles
Gerami, Z., Mahdizadeh, F. F., Aliyar, S., Lajayer, B. A., & Hatami, M. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-91009-5.00029-x · Cited by 2
Nano-modification in digital manufacturing of cementitious composites
Filho, F. F. D. M., Chen, Y., & Çopuroğlu, O. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85229-6.00009-3 · Cited by 2
Regulatory aspects: Toxicity and safety
Banerjee, S., Chakraborty, U., Banerjee, S., Bose, S., Mondal, A., & Bishayee, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-88450-1.00015-6 · Cited by 5
Preparation and Applications of Chitosan–Gold Bionanocomposites
Omar, R. A., & Jain, M. (2022) · Advanced structured materials · doi:10.1007/978-3-031-13343-5_3 · Cited by 4
Nanostructured Membranes for Water Purification
Li, X., Molelekwa, G. F., Khellouf, M., & der Bruggen, B. V. (2019) · Engineering materials · doi:10.1007/978-3-030-33745-2_9 · Cited by 2
Personalized energy systems based on nanostructured materials
Kovalenko, A. N., Tugova, E. A., Popkov, V. I., Karpov, O. N., & Klyndyuk, А. I. (2021) · Nanosystems Physics Chemistry Mathematics · doi:10.17586/2220-8054-2021-12-3-368-403 · Cited by 2
López‐Haro, M., Delgado, J. J., Hernández‐Garrido, J. C., López‐Castro, J. D. D., Mira, C., Trasobares, S., Hungría, A. B., Pérez‐Omil, J. A., & Calvino, J. J. (2012) · Wiley eBooks · doi:10.1002/9783527641864.ch26 · Cited by 2
Kim, S., Parasuraman, V., sekar, P. P., Sheraz, M., Azizar, G. A. B., Hong, J. W., Lee, W. R., Swamidoss, C. M. A., & Lee, H. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4570556 · Cited by 2
Ultrasound Ablation of a Solid Sample in Water Accompanied by Formation of Nanoparticles
Brysev, A. P., Klopotov, R. V., & Makalkin, D. I. (2019) · Physics of Wave Phenomena · doi:10.3103/s1541308x19010096 · Cited by 1
Sharma, P., & Uma, V. (2020) · Asian Journal of Chemistry · doi:10.14233/ajchem.2020.22694 · Cited by 1
Methodological foundations for teaching nanotechnology in the training of future physics teachers
Shoiynbaeva, G., Б., Е., Baidullayeva, G., Abdrassilova, V., & Umirbekova, Z. (2024) · Scientific Herald of Uzhhorod University Series Physics · doi:10.54919/physics/55.2024.4tnt2 · Cited by 1
Nguyen, N. H., Ngo, X. D., Hoang, V. T., Vu, T., Phan, V. N., Pham, D. T., & Anh-Tuan, L. (2024) · Advances in Natural Sciences Nanoscience and Nanotechnology · doi:10.1088/2043-6262/ada008 · Cited by 1
“Among them, copper is well known as one of the most popular elements, that wide-spread used in industry, agriculture, and drinking water supply systems [ 4, 5 ] .”
Early-Age Properties of Cement Pastes Incorporating Aqueous Dispersions of Carbon Nanofibers
Teymouri, A., Hossein, A. H., & Khoshnazar, R. (2025) · Lecture notes in civil engineering · doi:10.1007/978-3-031-61507-8_12 · Cited by 1
Boussai, K., Maherzi, W., Bellara, S., Senouci, A., Mosbahi, M., Khlifi, M., Abriak, N.-E., & Hamdi, N. (2025) · Waste and Biomass Valorization · doi:10.1007/s12649-025-02974-1 · Cited by 1
Advanced Materials: Introduction to Nanotechnology
González, B. B., Trompeta, A.-F. A., & Mercader-Moyano, P. (2025) · Springer eBooks · doi:10.1007/978-3-031-79115-4_4 · Cited by 1
Nanomaterials in Construction and Demolition Waste (CDW) Management
Pérez, D. C., Zaverdinos, G., & Solís-Guzmán, J. (2025) · Springer eBooks · doi:10.1007/978-3-031-79115-4_6 · Cited by 2
Effect of Multi-Walled Carbon Nanotubes in the Snail Cornu aspersum
Gualandris, D., Dondero, F., Franzin, A., Rotondo, D., Lorusso, C., Semeraro, T., & Calisi, A. (2025) · Environments · doi:10.3390/environments12070213 · Cited by 1
Fouad, R. (2025) · Journal of Reinforced Plastics and Composites · doi:10.1177/07316844251358025 · Cited by 1
“43,44 Furthermore, 3D printing technology is revolutionizing the construction industry by enabling precise placement of reinforcement materials, minimizing waste, and optimizing structural ef fi ciency.”
Vigneshkumar, A., Christy, C. F., Muthukannan, M., & Alengaram, U. J. (2026) · Structural Concrete · doi:10.1002/suco.70470 · Cited by 1
“…almost developed a similar pattern of peaks, but the formation of Si-O bonds in the NS-3% concrete samples was found to be with multiple peaks and high intensity representing better internal hydration process and formation of C3S, C2S at various peak intensities 43 – 45 as presented in Figure 28.”
Nanomaterial-Based Sensors for Environmental Monitoring
Yang, J. (2014) · Frontiers in nanobiomedical research · doi:10.1142/9789814616928_0005 · Cited by 1
Atomic-Scale Elastic Property Probed by Atomic Force Microscopy
Naitoh, Y., Li, Y. J., & Sugawara, Y. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10438-2 · Cited by 1
Nanotechnology-Based Materials Applied in Curtain Wall System: A Case Study from Turkey
Şahin, O. Z., & Gökuç, Y. T. (2020) · Iconarp International J of Architecture and Planning · doi:10.15320/iconarp.2020.118 · Cited by 1
“Nanomaterials used in construction, scope of applications and prospective benefits (expanded from Lee et al. 2010).”
BackgroundNanotechnological modifications of nanoparticles on reactive oxygen and nitrogen species
Madkour, L. H. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-822481-6.00017-7 · Cited by 1
A Critical Review on Durability of Sustainable Materials and Structures
Hoxha, D., Belayachi, N., Brunetaud, X., & Rémond, S. (2020) · Springer series in geomechanics and geoengineering · doi:10.1007/978-3-030-61118-7_16 · Cited by 2
Progresses and Major Research Challenges Under Changing Environmental Conditions
Saleh, H. M., & Hassan, A. I. (2021) · Springer eBooks · doi:10.1007/978-3-030-65912-7_20 · Cited by 1
Ewais, H. A. (2022) · Russian Journal of Physical Chemistry A · doi:10.1134/s0036024422140096 · Cited by 1
Toxic risk assessment of engineered nanoparticles used in ink formulations
Singh, R. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91145-0.00023-2 · Cited by 2
The Role of Nanomaterials in Radioactive Waste Reduction and Decontamination: A Concise Review
Salwadi, Y., & Kurapati, S. K. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-981-99-3386-0_12 · Cited by 1
Advancements and Prospects of Composites Consisting of Carbon-NanomaterialDispersed Liquid Crystals
Kumar, A., Mathur, A., & Bahadur, P. S. (2023) · Asian Journal of Applied Science and Technology · doi:10.38177/ajast.2023.7302 · Cited by 1
Ziati, M., Lahlali, S., & Hamid Ez-zahraouy, A. (2023) · Communications in Theoretical Physics · doi:10.1088/1572-9494/ad0f14 · Cited by 1
Enhancing cement hydration with nanosilica-coated polystyrene microspheres
Shalit, M., Radune, M., Knop, Y., & Mastai, Y. (2024) · Advances in Cement Research · doi:10.1680/jadcr.23.00203 · Cited by 1
Lippy, B. E., Brooks, S. B., Cooper, M. R., Burrelli, L. G., Saldivar, A., & West, G. H. (2024) · American Journal of Industrial Medicine · doi:10.1002/ajim.23618 · Cited by 5
Biofunctionalization of Carbon Nanostructures
Zamel, D., Khan, A. U., Elmasry, S. A., Elsayed, A. S. S., Khan, S., Hanif, M. A., & Karim, S. (2023) · Springer eBooks · doi:10.1007/978-3-031-14955-9_36-1 · Cited by 1
Repairing of concrete structures using nano-silica concrete
Tripathi, A., & Mishra, A. (2024) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/1326/1/012069 · Cited by 1
Giraldo, L. J., Galeano-Caro, D., Calderon-Diaz, L., Cardona, A., Khalilnezhad, A., Riazi, M., Amiri, M., Franco, C. A., & Cortés, F. B. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-15894-0.00002-1 · Cited by 1
Gray, K. A. (2011) · Cambridge University Press eBooks · doi:10.1017/cbo9780511988554.003 · Cited by 2
Photocatalytic nanostructured TiO2 for protection of porous and compact stone
Pagliarulo, A., Petronella, F., Licciulli, A., Rocca, A., Diso, D., Calia, A., Lettieri, M., Colangiuli, D., Agostiano, A., Curri, M. L., et al. (2012) · doi:10.13140/rg.2.1.2733.7762 · Cited by 1
Behavior of Nanomaterials in Soft Soils: A Case Study
Majeed, Z. H., & Taha, M. R. (2017) · Soil biology · doi:10.1007/978-3-319-46835-8_7 · Cited by 1
Goncharova, M. A., Simbaev, V. V., & Karaseva, O. V. (2018) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/www.scientific.net/ssp.284.1052 · Cited by 1
“In selecting the composition of concretes, the experience of optimizing the conditions of the minimum void ratio with partial substitution of traditional raw materials with secondary production waste was used [19, 20].”
MethodAbouzaripour, M., bae, M. H., Rezaie, M. J., Nikkho, B., Allahveisi, A., Roshani, D., Khalesro, S., & Daneshi, E. (2019) · Scientific Journal of Kurdistan University of Medical Sciences · doi:10.29252/sjku.24.2.66 · Cited by 1
Mohamed, A. J., Ibtesam, A., & Firas, H. A. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/571/1/012066 · Cited by 1
Okwunodulu, F. U., Ufearoh, S. M., Friday, A. J., & Anim, A. N. (2020) · Communication in Physical Sciences · Cited by 1
Adsorption of Deoxyribonucleic Acid on Nanocrystalline Titanium and Cerium Dioxide Surfaces
Markitan, O. V., & Vlasova, N. N. (2021) · Colloid Journal · doi:10.1134/s1061933x21040050 · Cited by 1
Dang, C., Jiang, H., Zheng, M., Li, Z., Liu, W., & Fu, J. (2021) · Royal Society of Chemistry eBooks · doi:10.1039/9781839165092-00507 · Cited by 1
3. Shape-controlled metal nanoparticles for electrocatalytic applications
García‐Cruz, L., Montiel, V., & Solla‐Gullón, J. (2018) · De Gruyter eBooks · doi:10.1515/9783110345100-003 · Cited by 3
Risks and Preventive Measures of Nanotechnology
Anwar, W., & Khitab, A. (2017) · IGI Global eBooks · doi:10.4018/978-1-5225-1798-6.ch065 · Cited by 1
(2020) · Elsevier eBooks · doi:10.1016/b978-0-12-820591-4.00001-3 · Cited by 1
Inorganic Oxide Semiconductors for Environmental Photocatalysis
Lee, J., Park, B., Puma, G. L., & Choi, W. (2022) · Springer handbooks · doi:10.1007/978-3-030-63713-2_57 · Cited by 1
Self-citationAt the end of the life cycle of carbon nanotubes : an ecotoxicological point of view
Simon, A., & Hollert, H. (2014) · RWTH Publications (RWTH Aachen) · Cited by 1
Hakimian, A. (2015) · Digital Repository Service (Northeastern University) · doi:10.17760/d20194103 · Cited by 1
Mitigating employer liability for producers and users of engineered nano materials
McAlea, E. M. (2015) · Arrow@dit (Dublin Institute of Technology) · doi:10.34961/5 · Cited by 1
Nanotoxicology Aspects of Carbohydrate Nanostructures
Ma, Y., & Yang, Q. (2015) · Wiley eBooks · doi:10.1002/9781118860212.ch16 · Cited by 1
CAPILLARY-ASSISTED ENHANCED CONDENSATION HEAT TRANSFER FOR LOW SURFACE TENSION LIQUIDS
Durgam, G. V. (2018) · doi:10.37099/mtu.dc.etdr/574 · Cited by 1
The fate of engineered nanomaterials in sediments and their route to bioaccumulation
Cross, R. K. (2017) · Open Research Exeter (University of Exeter) · Cited by 1
Functionalized Nanostructured Materials for Supercapacitor Applications
Moharana, S., Sahu, B. B., Nayak, R., Jyotish, J., Mahaling, R. N., Dhandapani, K., & Deshmukh, K. (2024) · Wiley eBooks · doi:10.1002/9783527838851.ch27 · Cited by 1
Engineered metal based nanomaterials in aqueous environments
Mudunkotuwa, I. A. (2013) · doi:10.17077/etd.rfftq3ji
Environmental and Societal Applications and Implications
Bensebaa, F. (2012) · Interface science and technology · doi:10.1016/b978-0-12-369550-5.00008-2
Advances in the modelling of in-situ powder diffraction data
Müller, M. (2013) · OPUS Publication Server of the University of Stuttgart (University of Stuttgart) · doi:10.18419/opus-6841
“In construction industry, nanomaterials are used to create self-cleaning surfaces or enhance the structural strength of materials (Aegerter et al., 2008; Lee et al., 2010).”
BackgroundSHAPE OF A NUCLEUS GROWING ON STRONGLY CURVED SURFACE OF A NANOFIBER
Sveshnikov, A., Demo, P., Kožíšek, Z., & Tichá, P. (2014) · Acta Polytechnica · doi:10.14311/ap.2014.54.0439
Electrospun Fibrous Films with Sub-Micrometer Structure in Biomedical Applications
Feng, C., Mo, L. F., & Liu, F. J. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.332-334.977
Structural and Dielectric Characterization of Nickel-Cobalt Oxide
Raveendran, R. (2013)
Complex Magnetic Nanostructures: A Brief Overview
Sharma, S. K. (2015) · Nano Research & Applications
Zhao, Y. (2015) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/65668 · Cited by 1
“Today, nanotechnology has been applied to a wide range of fields including industry, engineering, biotechnology, medical healthcare, and life sciences [3-5].”
BackgroundTrends in Nanoscopy in Materials Research
Sharif, A. (2016) · Advances in civil and industrial engineering book series · doi:10.4018/978-1-5225-0344-6.ch003
Risks and Preventive Measures of Nanotechnology
Anwar, W., & Khitab, A. (2016) · Advances in civil and industrial engineering book series · doi:10.4018/978-1-5225-0344-6.ch008
Cluster Origin of Solvation Features of C-Nanostructures in Organic Solvents
Torrens, F., & Castellano, G. (2016) · Advances in medical technologies and clinical practice book series · doi:10.4018/978-1-5225-0248-7.ch008
Torrens, F., & Castellano, G. (2012) · IGI Global eBooks · doi:10.4018/978-1-4666-1607-3.ch001
Nilsson, P. T., Pagels, H. J., Eriksson, A. C., & Messing, M. E. (2013)
Analysis of new formulations for nano-filled concrete, bituminous coatings and insulation
George-Andrei, U., Maria, U., Pintea, A., & Grapina, R. I. (2016) · International Conference and Exposition on Electrical and Power Engineering (EPE) · doi:10.1109/icepe.2016.7781301
“The nanosilica will increase the properties of the concrete product, the workability and the properties in hardened condition, allowing the preparation of high performance mortars for special constructions [1], [2].”
BackgroundNano‐Exposure Science: How Does Exposure to Engineered Nanomaterials Happen?
Sayes, C. M., & Aquino, G. V. (2017) · doi:10.1002/9783527800308.ch22
Schöber, W., Matzen, W., Winterhalter, R., Sysoltseva, M., & Fromme, H. (2017) · Journal of Consumer Protection and Food Safety · doi:10.1007/s00003-017-1090-4
Screening Of Quantum Dots For Toxicity On The Growth And Viability Of Escherichia Coli
Tharkur, J. (2013) · Journal of International Crisis and Risk Communication Research
Improved functional performances of traditional artistic pottery by sol-gel nanoparticles deposition
Battistini, C., Pucci, M., Lottini, E., Tana, F., Berretti, E., Martinuzzi, S. M., Ciattini, S., Cortigiani, B., Galvanetto, E., Nardo, L. D., et al. (2018) · Materials Research Express · doi:10.1088/2053-1591/aaee9f
NANOTECHNOLOGY IN CIVIL ENGINEERING APPLICATIONS AND MANAGEMENT.
RajPreethan, B., & Rajkumar, D. (2019) · International Journal of Advanced Research · doi:10.21474/ijar01/8325
FIRST-PRINCIPLES INVESTIGATION OF THE INTERFACIAL PROPERTIES OF BORON NITRIDE
Waters, K. (2018) · Digital Commons - Michigan Tech (Michigan Technological University) · doi:10.37099/mtu.dc.etdr/760
Metadata
- Authors
- Lee, J., Mahendra, S., & Alvarez, P. J. J.
- Affiliations
- Rice University (US)
- University of California, Los Angeles (US)
- Corresponding author
- Alvarez, Pedro J. J.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-07-12
- Volume
- 4
- Issue
- 7
- Pages
- 3580-3590
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2039331751
- Cited by
- 750
- References
- 134
- Citations by year
- 2026: 11 · 2025: 41 · 2024: 54 · 2023: 37 · 2022: 51 · 2021: 52 · 2020: 59 · 2019: 60 · 2018: 57 · 2017: 66 · 2016: 55 · 2015: 53 · 2014: 46 · 2013: 50 · 2012: 34
- FWCI
- 1.66
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Nano (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Nanoparticles: synthesis and applications
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Materials Science › General Materials Science › Nanotechnology research and applications
- Keywords
- engineered nanomaterials, nanocomposites, building materials, environmental health and safety, nanomaterial toxicity, nanomaterial disposal, nanomaterial regulation, self-cleaning surfaces, antimicrobial materials
- MeSH terms
- Animals, Construction Materials, Environment, Health, Humans, Industry, Safety, Nanostructures
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.