The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Electrospun Sb/C Fibers for a Stable and Fast Sodium-Ion Battery Anode
Abstract
Sodium-ion batteries (SIBs) are considered a top alternative to lithium-ion batteries (LIBs) for large-scale renewable energy storage units due to their low cost and the abundance of sodium-bearing precursors in the earth's mineral deposits. However, the development of anode materials for SIBs to date has been mainly limited to carbonaceous materials with minimal research devoted to high capacity alloy-based materials. In this study, an antimony (Sb)/carbon (C) electrode with ~30 nm Sb nanoparticles (NPs) uniformly encapsulated in interconnecting one-dimensional (1D) 400 nm carbon fibers (denoted as SbNP@C) was fabricated using a simple and scalable electrospinning method. This binder-free, current collector-free SbNP@C electrode demonstrated high capacity and stable long-term cycling performance at various current densities. The SbNP@C electrode showed an initial total capacity of 422 mAh/gelectrode and retained 350 mAh/gelectrode after 300 deep charge-discharge cycles under 100 mA/gSb. Moreover, because of the efficient 1D sodium-ion transport pathway and the highly conductive network of SbNP@C, the electrode preserved high overall capacities even when cycled at high currents, extending its usability to high power applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
Manganese oxides for lithium batteries
Thackeray, M. M. (1997) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(97)81003-5 · Cited by 1,475
Sodium and sodium-ion energy storage batteries
Ellis, B. L., & Nazar, L. F. (2012) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2012.04.002 · Cited by 1,460
Electrochemical investigation of the P2–NaxCoO2 phase diagram
Berthelot, R., Carlier, D., & Delmas, C. (2011) · Nature Materials · doi:10.1038/nmat2920 · Cited by 1,232
Hollow Carbon Nanospheres with Superior Rate Capability for Sodium‐Based Batteries
Tang, K., Fu, L., White, R. J., Yu, L., Titirici, M., Antonietti, M., & Maier, J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100691 · Cited by 1,104
A multifunctional 3.5 V iron-based phosphate cathode for rechargeable batteries
Ellis, B. L., Makahnouk, W. R. M., Makimura, Y., Toghill, K., & Nazar, L. F. (2007) · Nature Materials · doi:10.1038/nmat2007 · Cited by 964
Cited by
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Self-citationProgress in flexible lithium batteries and future prospects
Zhou, G., Li, F., & Cheng, H.-M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43182g · Cited by 1,498
MoS2/Graphene Composite Paper for Sodium-Ion Battery Electrodes
David, L., Bhandavat, R., & Singh, G. (2014) · ACS Nano · doi:10.1021/nn406156b · Cited by 1,212
Na-Ion Battery Anodes: Materials and Electrochemistry
Luo, W., Shen, F., Bommier, C., Zhu, H., Ji, X., & Hu, L. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00482 · Cited by 1,081
Self-citationPrediction and Characterization of MXene Nanosheet Anodes for Non-Lithium-Ion Batteries
Xie, Y., Dall’Agnese, Y., Naguib, M., Gogotsi, Y., Barsoum, M. W., Zhuang, H. L., & Kent, P. R. C. (2014) · ACS Nano · doi:10.1021/nn503921j · Cited by 1,046
Recent Progress in Electrode Materials for Sodium‐Ion Batteries
Kim, H., Kim, H., Ding, Z., Lee, M. H., Lim, K., Yoon, G., & Kang, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600943 · Cited by 986
High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn502045y · Cited by 907
Xie, X., Zhao, M.-Q., Anasori, B., Maleski, K., Ren, C. E., Li, J., Byles, B. W., Pomerantseva, E., Wang, G., & Gogotsi, Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.005 · Cited by 903
Yang, J., Zhou, X., Wu, D., Zhao, X., & Zhou, Z. (2017) · Advanced Materials · doi:10.1002/adma.201604108 · Cited by 755
Recent progress on sodium ion batteries: potential high-performance anodes
Li, L., Zheng, Y., Zhang, S., Yang, J., Shao, Z., & Guo, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01023d · Cited by 740
Zhang, B., Kang, F., Tarascon, J.-M., & Kim, J.-K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.08.002 · Cited by 720
Challenges and Perspectives for NASICON‐Type Electrode Materials for Advanced Sodium‐Ion Batteries
Chen, S., Wu, C., Shen, L., Zhu, C., Huang, Y., Xi, K., Maier, J., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700431 · Cited by 705
A review of carbon materials and their composites with alloy metals for sodium ion battery anodes
Balogun, M.-S., Luo, Y., Qiu, W., Liu, P., & Tong, Y. (2016) · Carbon · doi:10.1016/j.carbon.2015.09.091 · Cited by 671
Nanoparticles meet electrospinning: recent advances and future prospects
Zhang, C.-L., & Yu, S.-H. (2014) · Chemical Society Reviews · doi:10.1039/c3cs60426h · Cited by 665
Electrochemical Intercalation of Potassium into Graphite
Zhao, J., Zou, X., Zhu, Y., Xu, Y., & Wang, C. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602248 · Cited by 647
Self-citationCarbon-Based Fibers for Advanced Electrochemical Energy Storage Devices
Chen, S., Qiu, L., & Cheng, H.-M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00466 · Cited by 555
Li, W., Hu, S., Luo, X., Li, Z., Sun, X., Li, M., Liu, F., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605820 · Cited by 536
Choi, S. H., Ko, Y. N., Lee, J., & Kang, Y. C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402428 · Cited by 515
Wu, X., Wu, C., Wei, C., Hu, L., Qian, J., Cao, Y., Ai, X., Wang, J., & Yang, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12620 · Cited by 502
Self-citationPeng, S., Han, X., Li, L., Zhu, Z., Cheng, F., Srinivansan, M., Adams, S., & Ramakrishna, S. (2016) · Small · doi:10.1002/smll.201502788 · Cited by 485
Self-citationWang, N., Bai, Z., Qian, Y., & Yang, J. (2016) · Advanced Materials · doi:10.1002/adma.201505918 · Cited by 472
Eshetu, G. G., Elia, G. A., Armand, M., Forsyth, M., Komaba, S., Rojo, T., & Passerini, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000093 · Cited by 470
Update on anode materials for Na-ion batteries
Kang, H., Liu, Y., Cao, K., Zhao, Y., Jiao, L., Wang, Y., & Yuan, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03181h · Cited by 468
Self-citationRecent developments in electrode materials for sodium-ion batteries
Wang, L. P., Yu, L., Wang, X., Srinivasan, M., & Xu, Z. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06467d · Cited by 468
Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries
Yao, H.-R., Wang, P.-F., Gong, Y., Zhang, J., Yu, X., Gu, L., OuYang, C., Yin, Y.-X., Hu, E., Yang, X.-Q., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05176 · Cited by 466
Recent advances in titanium-based electrode materials for stationary sodium-ion batteries
Guo, S., Yi, J., Sun, Y., & Zhou, H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01807f · Cited by 453
Recent Progress on the Alloy‐Based Anode for Sodium‐Ion Batteries and Potassium‐Ion Batteries
Song, K., Liu, C., Mi, L., Chou, S., Chen, W., & Shen, C. (2021) · Small · doi:10.1002/smll.201903194 · Cited by 450
Liu, J., Kopold, P., Wu, C., van Aken, P. A., Maier, J., & Yu, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02074c · Cited by 439
Zhang, Y., Zhu, P., Huang, L., Xie, J., Zhang, S., Cao, G., & Zhao, X. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402833 · Cited by 428
Synergistic Na-Storage Reactions in Sn4P3 as a High-Capacity, Cycle-stable Anode of Na-Ion Batteries
Qian, J., Xiong, Y., Cao, Y., Ai, X., & Yang, H. (2014) · Nano Letters · doi:10.1021/nl404637q · Cited by 414
An Organic Pigment as a High‐Performance Cathode for Sodium‐Ion Batteries
Luo, W., Allen, M., Raju, V., & Ji, X. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400554 · Cited by 406
Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review
Jung, J.-W., Lee, C.-L., Yu, S., & Kim, I.-D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta06844d · Cited by 402
Peng, S., Li, L., Hu, Y., Srinivasan, M., Cheng, F., Chen, J., & Ramakrishna, S. (2015) · ACS Nano · doi:10.1021/nn506851x · Cited by 387
A Chronicle Review of Nonsilicon (Sn, Sb, Ge)‐Based Lithium/Sodium‐Ion Battery Alloying Anodes
Liang, S., Cheng, Y., Zhu, J., Xia, Y., & Müller‐Buschbaum, P. (2020) · Small Methods · doi:10.1002/smtd.202000218 · Cited by 383
Kaneti, Y. V., Zhang, J., He, Y.-B., Wang, Z., Tanaka, S., Hossain, M. S. A., Pan, Z.-Z., Xiang, B., Yang, Q.-H., & Yamauchi, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03939e · Cited by 351
MXenes for Non‐Lithium‐Ion (Na, K, Ca, Mg, and Al) Batteries and Supercapacitors
Aslam, M. K., Niu, Y., & Xu, M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000681 · Cited by 337
Ultra‐Uniform SnOx/Carbon Nanohybrids toward Advanced Lithium‐Ion Battery Anodes
Zhou, X., Dai, Z., Liu, S., Bao, J., & Guo, Y. (2014) · Advanced Materials · doi:10.1002/adma.201400173 · Cited by 330
Xia, L., Wang, S., Liu, G., Ding, L., Li, D., Wang, H., & Qiao, S. (2016) · Small · doi:10.1002/smll.201503315 · Cited by 328
Liang, L., Xu, Y., Wang, C., Wen, L., Fang, Y., Mi, Y., Zhou, M., Zhao, H., & Lei, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00878f · Cited by 307
Self-citationRecent advances in energy materials by electrospinning
Liu, Q., Zhu, J., Zhang, L., & Qiu, Y. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.281 · Cited by 306
Wang, H., Xu, Z., Li, Z., Cui, K., Ding, J., Kohandehghan, A., Tan, X., Zahiri, B., Olsen, B. C., Holt, C. M. B., et al. (2014) · Nano Letters · doi:10.1021/nl500011d · Cited by 299
Nanocomposite Materials for the Sodium–Ion Battery: A Review
Liang, Y., Lai, W., Miao, Z., & Chou, S. (2018) · Small · doi:10.1002/smll.201702514 · Cited by 299
Low-Surface-Area Hard Carbon Anode for Na-Ion Batteries via Graphene Oxide as a Dehydration Agent
Luo, W., Bommier, C., Jian, Z., Li, X., Carter, R., Vail, S., Lu, Y., Lee, J.-J., & Ji, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507679x · Cited by 293
SnSe2 2D Anodes for Advanced Sodium Ion Batteries
Zhang, F., Xia, C., Zhu, J., Ahmed, B., Liang, H., Velusamy, D. B., Schwingenschlögl, U., & Alshareef, H. N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601188 · Cited by 287
Wearable energy sources based on 2D materials
Yi, F., Ren, H., Shan, J., Sun, X., Wei, D., & Liu, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00849j · Cited by 285
Shrivastav, V., Sundriyal, S., Goel, P., Kaur, H., Tuteja, S. K., Vikrant, K., Kim, K.-H., Tiwari, U. K., & Deep, A. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.05.006 · Cited by 284
He, J., Wang, W., Sun, F., Shi, W., Qi, D., Wang, K., Shi, R., Cui, F., Wang, C., & Chen, X. (2015) · ACS Nano · doi:10.1021/acsnano.5b04236 · Cited by 226
Self-citation
Metadata
- Authors
- Zhu, Y., Han, X., Xu, Y., Liu, Y., Zheng, S., Xu, K., Hu, L., & Wang, C.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-07-03
- Volume
- 7
- Issue
- 7
- Pages
- 6378-6386
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2161859410
- Cited by
- 639
- References
- 24
- FWCI
- 43.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.